OS X Mavericks :: Sometimes MacBook Pro Doesn't Go To Sleep
Sep 2, 2014
After I upgraded my macbook pro mid 2012 to OS Mavericks, when I shut the lid, it sometimes won't go to sleep. I don't realise it until I take it out to use it again. When open the lid, the screen will be black and won't light up like it would if it had gone to sleep, the light that usually blinks when the computer is on sleep mode is continually on - not blinking, my computer would be hot and I can hear the fan. I've ended up having to force shut the computer down way too many times. After I switch on my computer again, I would find my battery drained as though I had been using it while it should have been asleep.
It hasn't happened when I go into the Apple menu and select 'sleep', but then again, I hardly ever do that. having to force shut it down too often, as there are other problems that have arisen after OS Mavericks update that also need force shutting down, and apparently force shutting down computers is bad for the RAM.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mountain Lion (10.8.4)
View 1 Replies
ADVERTISEMENT
Jun 17, 2014
I am running Mavericks 10.9.3
I enable security preference pane requirepasword on waking from sleep.
I select sleep or close lid on my MBP but nothin happens.
How can I enable?
Info:
MacBookPro, OS X Mavericks (10.9.3), 2 HG Intel Core I7 8 GB Ram
View 2 Replies
View Related
Oct 10, 2009
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
View 11 Replies
View Related
Aug 16, 2009
I bought a MBP this February. For some reason, it won't go to sleep if I close the lid -- I have to manually go to the apple menu and press sleep. Any ideas? I tried a clean install, still no luck.
View 5 Replies
View Related
Dec 24, 2009
Why doesn't my MacBook Pro wake up from sleep sometimes ,I close the lid and when I come back and reopen it the screen doesn't turn back on.
View 4 Replies
View Related
May 21, 2012
When i shut my computers lid it doesnt go into sleep mode. Every few seconds the fan would start up, and a few hour after i shut the lid when i open it the computer is still warm. I need to know if this is normal, if it can be adjusted, or if something is wrong with my Macbook Pro?
Info:
MacBook Pro (15-inch Late 2011)
View 4 Replies
View Related
Jun 10, 2012
When closing the lid the Pro doesn't go to sleep on random occasions. This just became a problem. I can plug and unplug the power and it goes to sleep. The sleep mode will also put it to sleep. What can I do?
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 26, 2012
It's been a while now that my mac pro 13" (july 2011 version with lion) either doesn't wake up from sleep (or appears so because the screen stays turned off) or it does but when asked to log back in, I type the password and press enter, and the colored wheel shows up and stops responding...not even gets to log in. I have to hard reset with the power button.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 4 Replies
View Related
Apr 6, 2009
I've heard that Macbook Pro's have this issue, but it seems like my white Macbook is exhibiting this sometimes. It's not a lot but I've encountered it about 3-5 times now. When I just close the lid, the little white light at the front should glow and unglow. It seems like the light stayed lit so when I open the lid the screen wouldn't turn on and there is no response and I would be forced to cold boot. My Macbook is up to date, with no problem in diagnostic.
View 3 Replies
View Related
May 16, 2010
I've been loving every minute of my new 17" i7 MBP except for one thing. After waking my computer from sleep, the Firefox browser doesn't work correctly. I can see the window, with all my tabs, but nothing is clickable except for the menus at the top. I have to restart the browser in order to get it to work. It's not the biggest pain in the arse, but I'd like to pop open the computer and start browsing instantly. Any thought as to what may be causing this or what I can do to fix it?
View 1 Replies
View Related
Mar 8, 2012
I'm a recent convert to a MacBook Air 13" Mid 2011 (running Mac OS X 10.7.3) in which I have connected to a HP 2711x monitor via the the Thunderbolt port using a DP to DVI adaptor connected to a DVI cable ultimately plugged into the DVI source on the monitor. In run my configure with both the MacBook's screen and the monitor running, extending my desktop not mirroring.
While everything works on "first run", for example connecting the laptop at the beginning of the day, at some point when the MacBook Air sleeps or (potentially) the HP monitor, when either are woken, the monitor no longer senses a DVI source. The MacBook still believes there is a second display. But, the HP monitor goes back to sleep. Turn the power off and back on to the monitor doesn't fix the problem. The only fix is to pull the power cord on the monitor and plug it back in, and it immediately goes back to normal.
I've tried shutting off the "Auto-Switch Source" feature on the monitor and have set the default source to DVI. We even tried using a different setup via HDMI, and the same problem occurred.
Info:
MacBook Air, Mac OS X (10.7.3)
View 6 Replies
View Related
Jun 15, 2012
I was calibrating my MacBook Pro's battery and when I was running the battery down, after the point where the "Low Battery" warning popped up, it ran for 9-10 minutes and the computer just shut down. Let me mention that my battery has no problem lasting for 7 hours. What could be the issue? Is this normal behaviour?
View 11 Replies
View Related
Aug 24, 2014
I have brand new, mostly untouched, 13" rMBP running Mavericks (10.9.4) that crashes during sleep. If I close the lid and leave it for more than a few hours, I have to do a force shut down by holding the power button for a few seconds and turn it back on again.
I've already followed the advice of this article: OS X: When your Mac doesn't sleep or wake and have called Apple Support, who did nothing but read the article to me.
I have:
- reset the System Management Controller
- restored all defaults in Energy Saver preferences
- booted into Safe Mode to verify disk (unsure of whether or not this was effective at all)
In my Console, I am getting a line that says "com.apple.message.signature: Platform Failure"
According to this other thread - MB can't wake up from sleep anymore - it seems like it might be a hardware failure.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Dec 12, 2010
Can someone tell me how to set up a password at bootup that doesn't have to be entered from sleep?
View 1 Replies
View Related
Feb 28, 2012
Anyway, sometimes I'll leave my MacBook Air on without the power adaptor attached, and the battery will drain.That's all fine and dandy.The problem is, is that instead of going to sleep LIKE IT SHOULD, it will completely turn off, and everything I had up (web pages, anything and everything) will be GONE when it starts back up.
Info:
13-inch MacBook Air, Mac OS X (10.6.6), M-Audio Keystation 61es
View 3 Replies
View Related
Jun 6, 2012
I already tried a bunch of stuff such as SMC, and doing the terminal thing and Network (Sharing) and nothing works.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 25, 2012
Have a brand new MBP 13" using Thunderbolt-DVI adapter with my old Dell 2405 LCD. Have an interesting scenario ... when the display goes to "sleep" there is still some type of signal coming out of the display port. The monitor will stay on and just blink "NO SIGNAL DETECTED ON INPUT 2". But the monitor actually still stays on.When I put the entire laptop to sleep them the monitor will properly power down to sleep mode.
I don't think its the monitor because I've used this monitor with a number of different machines and graphics cards, in every scenario when I had the display set to sleep it powered off just fine.
View 4 Replies
View Related
Nov 21, 2010
my mbp i7's double tap doesn't save when i set it to a certain "double-click speed" so when i put my mbp to sleep or restart it, i'm forced to go back to the settings and set my double-click speed again. The point of me doing this is because for some reason, my double-click doesnt register or hi-light the text in the URL or text in essays etc. when its set up to the fourth notch on the slide bar. so i have to put it down to 0 on the bar in order for my double tap to register. Its really annoying to have to redo this every time i come back to my mbp.
View 1 Replies
View Related
May 26, 2012
My computer won't start, the monitor dosn't come on, and the sleep light blinks constantly.
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 22, 2012
After using my MacBook Pro I close the laptop and it goes to sleep. Later when I return to it and open it, sometimes it can't find the network. The computer is able to see that I have an Apple Network available, but it won't connect.Sometimes when I try to connect, it gives me a timeout. How I fix it is to walk over to the router and unplug it and plug it back in. After I get the green light again, I go to the Apple Network and it works.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Nov 30, 2014
My MacBook Pro 13" (Mid 2010) doesn't go to sleep, when I close the lid or when I try to activate sleep under the Apple menu. I haven't changed nothing in the system preferences. I already tried the following: unplugged all USB devices plugged and unplugged external display closed all applications (except of Finder of course) resetted all energy saving preferences deactivated bluetooth checked share options (everything is deactivated)
Then I unplugged it from the power supply and after I closed the lid, it went to sleep. Then plugged in power supply again and sleep didn't work.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Sep 3, 2009
I bought this machine after selling my old Aluminium MacBook expecting simply better battery and a bit faster, but there's tons of little updates that I'm thoroughly impressed with.
- Unplugging a cord or device from MBP doesn't flicker the screen when in sleep
- Screen "fades" in after sleep instead of instantly popping in
- If I have the screen at lowest brightness, and wake from sleep, before it would flicker full brightness then go to low again, now it stays low
- Backlighting had so much bleed on old MacBook that it was painful to use, it "bled" everywhere. Now it's only the letter of the key and a small rim around the key
View 2 Replies
View Related
Aug 24, 2014
ever since a few weeks ago, my mbp mid-2009 15" running mavericks will not go to sleep. when i use the apple menu or when i shut the lid, it will take awhile and then goes to sleep, but immediately wakes up again. i can tell by the indicator light and by the sound of the machine. It's not a user issue, as it happens on all users and even on a guest user. it happens on the user's login screen. i repaired permissions. no problems with the hard drive test. i turned off all sharing. i quit all apps. i did a smc reset.
I have an SSD installed as my main hard drive. I mounted another SATA drive in my optical bay. I even unmounted that drive thinking it might be that (although it was working fine for years before).On activity monitor, i notice kernel_task is running, but not high; however, i notice that the idle wake ups is very high - over 1000.
View 4 Replies
View Related
Sep 4, 2014
MacBook Pro with Retina display, OS X Mavericks (10.9.4), 15" top of the line late 2013.
Problem: When running computer in clamshell mode, it will often log me out automatically and/or crash the computer and/or cause an auto restart.
I've run a hardware test by holding down D during restart and it didn't show any issues there.
I've run a sleep/wake test in Terminal using a command I found on Google:
pmset -g log|grep -e " Sleep " -e " Wake "
Here are the results:
Notably:
Sleep (Failure code:0x1F006C00)
Sleep (Failure code:0x1F006700)
Sleep (Failure code:0x1F006900)
Last login: Fri Sep 5 16:00:01 on ttys000
[Code] .....
View 2 Replies
View Related
Mar 27, 2008
Does anyone else have this issue? I know of one other person in a previous thread but this never occured to me before.
View 4 Replies
View Related
Feb 28, 2012
Lately my iMac G5 doesn't go into sleep mode. I have it set to sleep after 20 minutes of no use.Also, I find the fan runs louder than normal.
Info:
iMac G5 20, Mac OS X (10.5.8), 20 inch 2.1 GHz G5 iMac
View 2 Replies
View Related
May 25, 2012
After I put the screen down, and the apple logo on MBP turns off, if I put it back up in like 5 seconds, it will recover from sleep, but anything after that, I put the screen back up, nothing happens. To make it work, I have to press the power button until the hard drive makes some kind of noise, and then it starts from boot (or from hibernation, like when battery goes out and you plug back in).Nothing is plugged in, same thing happens whether adapter is plugged in or not. Also, my MBP only shows 2gb ram instead of 4gb?? Some odd times, it shows 4gb, but most times, 2gb. It's a 13" 2010 C2D model. Same things happen when I boot into windows using bootcamp.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 22, 2014
when my macbook pro go to sleep mode and after i try to started it - I got black screen and have a loading cursor mode, If I close my macbook and after 3 minutes open - all working fine!
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Jun 27, 2014
I can't access my Macbook Pro remotely, specially after several hours of inactivity,, whenever I try to access content of my library through the remote app or the Apple TV I'm unable to wake my Macbook Pro up.
My Macbook Pro is 2012 model (the last with de CD Drive) and it's running the Maverick OS, my questions are:
* I'm unable to find the "Unable Power Nap while plugged" option on the energy saver tab... is that because the model of my laptop doesn't support that?
* In order to access content from my library remotely, should the "Computer Sleep" option on the energy saver be on "Never" instead of the "1 hour" that I'm currently using... or is there a way to still be able to wake up the laptop with those settings
View 2 Replies
View Related
Sep 4, 2014
Just this morning, I opened my MacBook which had been sleeping overnight. for some strange reason, even when the screen was up, the light at the button was still glowing (indicating it was asleep). I tried forcing it to shutdown. When I turned it on again, it went to sleep mode right when the desktop was about to load. I tried booting from Windows 7 but sure enough, when I reached the login screen, the computer went to sleep. I concluded that it was definitely a sleep sensor problem.
Info:
MacBook, OS X Mavericks (10.9.1)
View 1 Replies
View Related
