MacBook Pro :: 13" - Unplugging Cord Or Device Doesn't Flicker Screen When In Sleep
Sep 3, 2009
I bought this machine after selling my old Aluminium MacBook expecting simply better battery and a bit faster, but there's tons of little updates that I'm thoroughly impressed with.
- Unplugging a cord or device from MBP doesn't flicker the screen when in sleep
- Screen "fades" in after sleep instead of instantly popping in
- If I have the screen at lowest brightness, and wake from sleep, before it would flicker full brightness then go to low again, now it stays low
- Backlighting had so much bleed on old MacBook that it was painful to use, it "bled" everywhere. Now it's only the letter of the key and a small rim around the key
View 2 Replies
ADVERTISEMENT
Apr 19, 2009
my backlight decided it only wants to light up intermittently. and only for a little bit at a time. screen seems to still work, but when i open from sleep, sometimes it will flicker on the right side (like a fluorscent bulb) and go out again, or light up completely like it is supposed to, or do nothing at all. Machine is over 2 years old, and has gotten a lot of use. What are the chances this is a relatively cheap (1-200) fix? The machine is in good shape otherwise except for palmrest cracking which i havent gotten fixed due to the fact there is no apple store within 100 miles...
View 1 Replies
View Related
Sep 10, 2009
I have a brand new MBA with the 128 SSD and am running Snow Leopard. I also have a 23" cinema display. My usual approach is to connect the MBA to my external keyboard and the display and then turn it on. It boots just fine and I end up with dual display (cinema and MBA). I then close the lid and the machine goes to sleep. Clicking on the mouse or keyboard NEVER wakes it up. Unplugging and replugging the USB keyboard sometimes wakes it, but not often. Doing the same with the monitor makes it turn off and on and off an on. My goal is to boot the machine, close the lid, and use the external display only, but it just won't do it without a lot of guesswork and fuss. I have searched this forum and the help forum and not seen this identical problem. Am I missing a setting or doing something wrong here?
View 3 Replies
View Related
Apr 8, 2012
My 2011 macbook pro does not go into sleep mode with the power cord on. The sleep light goes on, but does not go into "pulse" mode and the fans continue to run as well as the hard disk keeps running.Â
The issue started a few weeks back. I have tried switching off the internet sharing and other possible settings that might hinder the MBP going into sleep mode when the power cord is in. I have even down loaded PleaseSleep but that does not seem to function either.Â
Seems like a minor issue, but if the MBP does not enter into sleep mode correctly I am afraid the built-up heat might damage disks, rams or screen.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
View 9 Replies
View Related
May 4, 2012
I have recently discovered that my MacBook Pro (2009) with OSX Lion does not go to sleep when the power cord is connected. It does not matter if I close the lid or select sleep from the Apple menu. All that happens is that the screen is powered off, the SIL is solid and I can hear the HDD/fan. I have not changed any of my power settings recently and it has not been a problem previously. If I disconnect the power cord the MB goes to sleep as supposed to (the SIL led starts flashing).Â
Doing some research I have found other users with somewhat the same issues when VMWare Fusion is installed. I have done some further testing and it seems that if I disable the virtual machine's Network Adapter and quit VMWare Fusion the MB goes into sleeping mode when the lid is closed even with the power cord connected. Enabling the Network Adapter again prevents the MB to go into sleeping mode when the power cord is connected. This even applies when the VMWare application is shutted down.Â
My guess is that the Network Adapter somehow prevents the MB to go into sleeping mode. The workaround is of course toggling the Network Adapter on and off but the virtual machine has to be running in order to do so. Not being that familiar with network settings on a Mac is there any other way to get around the problem?Â
Info:
MacBook Pro (15-inch 2.53 GHz), Mac OS X (10.7.3)
View 5 Replies
View Related
Jan 2, 2011
I recently upgraded to a Macbook Pro 15" with a mini displayport, and I decided I would share my LCD monitor with my windows box. The desktop box is connected with DVI and I have connected my Macbook through an HDMI adaptor from Moshi. Everything works very well, and I'm pleased with the quality of the output, but I'm having trouble with a screen flicker in full screen games.
When I select full 1080p (1900x1080) in any full screen game, the screen "shudders." It does not occur on the OS X desktop, and I can only explain it as a shudder. Lines and text shift perceptively left and right, and the game is unplayable. I have experienced this problem in Starcraft 2, World of Warcraft, and Half Life: Episode 2 so far.
Could the problem be with my monitor and the way it handles an HDMI signal? The Macbook is flawless otherwise, with no other issues of any kind. The "shudder" only occurs during full screen games set to 1900x1080. Lower resolutions are not effected and work fine...
I'm stumped.
Edit: I should add that I have no other 1080p capable devices to test the output with.
View 2 Replies
View Related
Mar 3, 2012
Is it that there is just too much going on for the system, I have my HD encrypted.Â
Info:
MacBook Air (11-inch Late 2010), Mac OS X (10.7.3), HD encrypted
View 1 Replies
View Related
May 25, 2012
I bought a new HDMI adaptor for my 17" Macbook Pro. I'm plugging into a full HD compatible TV, into an HDMI port.The result is a consistant switch between the actual correct display, and colored static. The rate of the switch is dependent on the frequency of the refresh rate, but there's no way to get it anywhere near comfortable to use. I have tried changing resolutions on both sides to no avail. Here is a video of the screen periodically flickering between display and static url...Also have tried other HDMI ports and cables, all of which are known to be in working condition. Tried restarting the tv and computer. Running out of ideas and hair.Troubled Mac User
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
May 8, 2010
I'm not entirely sure how long my iMac has been doing this, maybe two weeks? When I try to wake it from sleep, the screen does not turn on. At all. At first I thought this was because my mouse and keyboard might not be functioning correctly, naturally the only remedy was to turn the computer off with the power button and to restart it (which took an abnormally long time). Today I remote connected with Back to my Mac screen sharing and it did not turn on either. I know it was awake because when I pressed the brightness buttons on the keyboard, it responded on my MBA's view of the screen. Normally, Back to my Mac does turn the screen back on. Anyone else have the same problem? It doesn't seem to matter WHEN it goes to sleep either. I've tried resetting the PRAM already and no dice.
View 1 Replies
View Related
Oct 28, 2010
My screen just started to occasionally have a flicker of a white line show up...
It doesn't happen that often, should i worry? Is it worth taking it into apple? (Under warranty still) Since its not consistent i wont necessarily be able to show them what its doing..
View 3 Replies
View Related
Oct 31, 2008
So I got a new Late 08 MBP 2.8 earlier this week. Everything has been great except that occasionally (once or twice an hour) my laptop screen will go black for about 200-300ms and then come back. Often only the top 1/2 or top 3/4 of the screen will go black. I was worried it was the LCD, but today I switched over to the 9600gt for the first time and the problem seems to have gone away. I generally code all day and havent been doing anything intense when the flickers happen, the CPU/GPU temps are also low.
I have an external monitor hooked up. Ive only noticed the problem when the external monitor was hooked up but then again 90% of the time I use the computer it has the external plugged in.
Also does anyone know if the 9400m's 256mb of memory is shared with the main RAM, ie if I am running on the 9400 do I only have access to about 3.74 gigs of ram?
View 24 Replies
View Related
Jul 3, 2009
I have a 13" MBP 2.53GHz, and I absolutely love it. However, I have one issue. I am using an Apple display port to DVI adapter to run the MBP in clamshell mode with my Samsung 221BW monitor. On websites or programs with a dark grey background, the screen flickers. The resolution is set to 1680x1050 (native) and 60Hz.
Does anybody else have this problem? Any ideas as to fixing it?
View 7 Replies
View Related
Feb 3, 2010
I don't know if it depends by a latest update I did to Itunes but after an uncertain amount of time my MacBook Pro 2.2Ghz Santa Rosa start to flicker. I have posted a video in youtube [URL] so you can see what happend. For a small amount of time while flickering is started the mouse can move around then it stuck and lock me out of the system. I have to reset many time PVRAM and SMC then it will restart until it lock it down again. It worked flawlessly until yesterday after if I don't remember wrong one or more software update. I use Snow Leopard (official licence). I downloaded the Combo Update for Snow Leopard and ran it. I still have to test it again. Since I need to do some work in the next 48 hours I can't full test it. After the hard reset an image pop out and It won't let me start up the system again ever if I reset many times PVRAM and SMC Then I use bootcamp to "unlock" the MBP. I do run windows under BootCamp. It will run but I can't see anything since the video remain black (I hear the HDD until stop working) Then I push the power down button and I turn off the windows Then after a long time it will log into Snow Leopard! I'm getting crazy the last two days
View 24 Replies
View Related
Mar 12, 2010
I've noticed recently that occasionally my screen will intermittently flicker.
It doesn't seem to be tied to anything specific. Just a random black screen flash.
View 6 Replies
View Related
Jul 5, 2010
Every time I moved my MacBook Lid my screen turns off and starts to flicker? Is there anyway you think i will get covered I haven't got any warranty left in it either.
View 3 Replies
View Related
Apr 3, 2012
My over 3 year old MacBook Pro Unibody (Late 2008) have a giant problem. The 9600m GT GPU is not working anymore, when booting up with that card the screen flickers and the OS crashes. I have been apple to boot it up with the 9400m GPU, where it works somewhat, no screenflicker, but it does crash alarmingly much as well as giving me a lot of kernel panics. (sometimes it can't boot the OS before freezing, and other times it crash while trying to shutdown the OS).Â
Since it is over 3 years old, there is no more gaurentee, so my question is:Â
Info:
MacBook Pro, Mac OS X (10.7.3), MacBook Pro (Late 2008)
View 2 Replies
View Related
Jun 30, 2009
Why is this? Can I stop it from happening? I just put the brightness all the way, plug the MagSafe back in, unplug it and it is back to being dim?
View 3 Replies
View Related
Jan 22, 2010
I have two laptops. One mac and one pc. I also have one external screen. Is there anyway I could switch my screen from one computer to the other without unplugging the VGA cable every time?
Is there some sort of splitter I can plug into both laptops and just press a button for the screen to go from one computer to the other?
Is there anything that can do that?
View 4 Replies
View Related
Jun 6, 2010
This is my first post on Macrumors and unfortunately it is in regards to a problem that I am currently experiencing with my brand new Macbook Pro 15" w/anti-glare upgrade. I purchased the unit on the 28th May and have used it without problems for until yesterday when I noticed some intermittent flickering in the screen generally a horizontal banding that happens quite sporadically and also changes in brightness levels etc. I checked in with an Apple store earlier today and a staff member at the Genius bar couldn't figure it out either. She tried installing new firmware, but the problem remained and told me that she suspects it is an issue related to the firmware as opposed to hardware. The only advice was to wait it out until Apple addresses the issue with a new firmware upgrade?
I can honestly say I'm not very impressed since this MBP was my supposed long-awaited transition from a lifetime user of PCs to the supposedly more stable/reliable Macs! Just my luck I guess. Nonetheless not a great start to my Mac experience. Anyways, just wanted to see what is the best way to go about it and whether I have the right to demand for an outright replacement (I will be heading off overseas on the 24th June and will definitely need it while away), which may be an issue in itself as I don't think any retailers (I'm located in Sydney) have the 15" w/anti-glare model on hand/stock - mine took over 2 weeks to arrive via a special order. Peoples thoughts? Anyone else experiencing similar issues? Only thing that I could find of relevance were the problems experienced earlier this year with the 27" iMacs.
View 1 Replies
View Related
Oct 10, 2009
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
View 11 Replies
View Related
Oct 14, 2009
I am using the pair with an early 2008 Mac Pro octo 2.8. Previous card was a 8800 GT, and previous monitor was a dell 2405WFP. No issue there (other than the 8800's fan noise).With the new setup, I occasionally get a whole screen flicker for a split second, and just now when I woke the display from sleep I got multicolored snow covering the entire screen, like this:
http://picasaweb.google.com/lh/photo...eat=directlink
(iphone photo, all I had handy)
Has anyone seen this with either the EVGA card pushing some other dual-link 30" display, or the 3007wfp-hc driven by some other card? I don't really have an easy way to test this myself, as it is pretty intermittent the two arrived around the same time, so I'm not sure which is the cause, but I haven't seen any problems like that in XP so I'm leaning towards the card (drivers, perhaps). I don't spend much time in XP, though, so I'm still not sure.
View 3 Replies
View Related
Jul 9, 2009
I'm curious if the screen still flickers.
View 1 Replies
View Related
Oct 21, 2008
My friend have sent macbook air to me, but the USB device doesn't work at all, whenever I plug memory stick or ipod cable in, nothinh happensit's doesn't find any device,
View 5 Replies
View Related
Jun 5, 2014
Recently I have a big problem with my macbook Pro, I don't know why but my device doesn't turn on when I shut it down. and I should wait for hours or sometimes for a whole day!!! what should I do?
View 9 Replies
View Related
Feb 25, 2008
In the last 5 days I've started noticing a strange flickering with images loading in Safari both static and in-line video e.g. cnn.com. A few days ago at lunch while home I opened both Safari and Firefox, opened cnn.com and then clicked on a video. With both videos playing at the same time it looked fine in Firefox but flickered in Safari. I've noticed the same issue with static image loads too. In FF the image loads no problem, in Safari it flickers. I don't think this is related to the video card (8800GT) but sounds like a software issue to me.
Anyone else having a similar problem? BTW, I'm running 10.5.2 with all the latest updates. I've subsequently noticed that turning the machine off and on again relieves the problem?
View 19 Replies
View Related
May 7, 2012
My imac screen has just started flickering. I have researched it and it already a problem with other mac's.
View 2 Replies
View Related
Oct 1, 2009
My monitor has been flickering in all my graphic programs. I'm thinking this has something to do with OSX 10.5.8 and the ATI Radeon 9000 card in my G4 MDD. I've swapped out the ATI card for another of the same quality to see if I get the same problem. The flickering came back. I am now trying out a generic lcd (cornea) to see if the problem occurs.
View 3 Replies
View Related
Apr 27, 2012
I have had my imac 21 for about 5 years Model identifier say 7.1. running OS 10.6.8 Has been going well apart from a new hard drive. Suddnely tonight the screen flickers when you first turn it on for a few minutes and then settles down but dims down where whites become a light grey. Tried turning off the monitor screen power off and power saver.
Info:iMac, Mac OS X (10.6.8), ilife 11
View 1 Replies
View Related
Aug 24, 2008
Handbreaked some stuff to be played with my appleTV. The files are 600mb-1Gb files (720x480?) with one pass deinterlace. The problem is that when I am playing them with my macpro, I get a white flicker when trying to play them full screen. Like a white strobo. When resizing the window smaller, they develope a black flicker. Only when doing playback in a smaller window (1/4 of the screensize) they play back normally. Display is a 30",so is my 7300Gs such a useless p.o.s or what is going on?
View 1 Replies
View Related
Jul 27, 2009
i bought a used 24" aluminum imac (2008 model) that was about 6 months old, but recently the screen has began to flicker...usually from a half to a full second every few hours or so. it sometimes will flicker if the mac is nudged on either side, but this doesnt always happen, even when i TRY to initiate it. its not really major, but im just worried that the whole display will crap out soon. ive found threads about screen flickering with macbooks and led displays, but nothing for imacs yet. im not sure if this matters, but the person i bought it from opened it up and replaced the hard drive. another contributing factor may be that i constantly run torrents and my mac sometimes stays on for days at a time. it doesnt seem to overheat and ive never had this problem with my other imac (2007 17" white). when im not using it, i keep the disks active, but put the monitor to sleep to prevent burn in. im assuming that since this guy replaced the HD, this would void any warranty, so i think im pretty screwed as far as thats concerned unless i pay out of my own pocket.
View 1 Replies
View Related
