I have a Mac Book Air running the latest OS. I created a document in Pages 5. Printed it to PDF then opened it in Preview to apply the Grey Tone filter. I export it and choose the filter, but it doesn't apply. I can't apply any filters, at all.
View 2 Replies
I recently upgraded and enabled iPhoto and started ICloud syncing for my photo stream. When I open Mail now, I have lost all my signatures and the filtering rules I had set up for incoming mail. How is this connected, and how can I get back my sigs and rules?
Info:
OS X Mavericks (10.9.4), iPad Air
I'm running 10.5.2 on a 2GHz C2D BlackBook. Recently I've encountered 3 symptoms that suggests Quartz Extreme stops working after the computer's been running for a while (and by a while, I mean it could only be a couple hours).
I've recently (a few days ago) set my desktop picture to change every minute. It's supposed to fade smoothly between pictures, and it did for a while, but then eventually I noticed the fading transition had stopped and the pictures were just switching without any kind of transition. The problem was resolved after a restart.
I don't use iMovie often. But I opened iMovie '08 yesterday and I got the following error message: "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics cards does not support Quartz Extreme." My only option was to quit iMovie. I noticed my desktop picture was also not doing the transitions any more. After a restart, both problems were resolved.
Today, I got the same error message in iMovie and the desktop isn't transitioning again. I haven't restarted yet, but I assume it will fix itself when I do. Also, I tried adding a widget to my dashboard to see if I get the ripple effect, to test my theory that Quartz Extreme (or is it core image, or core graphics?) stops working after a while. I did not get the ripple effect I usually get when adding a widget.
Since I just started using the changing desktop feature and 10.5.2 is a new update, I don't know if one of those could be causing the issue. I'll try turning off the desktop transitions and see if it continues.
So I cant use my mac book pro that I just bought with Imovie? (I just bought a mac book pro and I cant use Imovie because the Quartz whatever is not compatible with my graphics card?)
Info:
MacBook
Pro, Mac OS X (10.7.4)
I am trying to do a spoken word voice recording using garageband. I purchased a nice microphone, but I am getting a problem where it is picking up the sound of my nasal breathing. I am doing a meditation instruction recording so there is a fair amount of space where I'm not speaking, and it picks up this nasal breathing sound. I have been experimenting with the filters to filter this out but so far no success. Is there someone here familiar with garageband and has some suggestions?
View 3 Replies View RelatedI've been dealing with this issue for quite some time now. The first time I had the issue it was something about the plist and plugins folder if I remember correctly. That was when I had my Apple support they solved it by deleting and moving some files, but can't remember exactly. What happens is when Final Cut Pro 4.5 HD is loading audio filters on startup it just freezes and never opens up. Does anyone know how I can resolve this issue?
View 7 Replies View RelatedI want to be able to use basic html tags like forms, iframes etc...etc.. in my Wiki in 10.7.3 Lion server. I just can't find any definitive information on how to allow these types of tags etc...previous versions seemed to talk of a whitelist....but I can find nothing on my server like this. Any attempt to add them seems to get stripped when I go and save the wiki page.Â
View 1 Replies View Relatedhow do I remove unwanted pop-ups&spam from my imac-permanently
Info:
Mac OS X (10.7.2)
I am running Final Cut Pro 7 and I have a clip that already has RGB Balance filter and Key filter on it. I am adding Brightness Contrast or any of the other Gamma Correction type filters to the clip, It lets me adjust the filter but when I render it this filter is not included in the render. I have done some experimenting and it seems that the RGB balance is what is stopping this filter from being applied.
I have tried with all the possible filters that will let me adjust the levels on the image, I have tried taking the clip with the first two filters and nesting it then applying the new filter to the nested clip but nothing seems to work. This clip is too dark...
Info:
OS X Mavericks (10.9.3)
Is there an easy way to simple delete all filters from a selection of clips?Â
If I select multiple clips and then delete the filter, it only deletes it from the one single clip where the playhead is, the others are untouched.Â
If I make a cog standard clip, and then copy those attributes and paste it to the other clips as suggested it doesn't 'reset' those it merely dumps more filters on top or leaves the current ones untouched?Â
Do I really have to go in and select and delete one single filter off every single clip? There's a bunch of about 65 still frames I need to do this from and I can't bear the though of that.Â
Info:
iMac (27-inch, Late 2012), OS X Mountain Lion (10.8.2)
I'm using Gmail with Mail.app on my Macbook and my iPhone. I want to filter emails for shopping, entertainment and utilities into folders without having them all in my main inbox or a Gmail "All Mails" folder. Does anyone have a good solution for this?
A little background:
I have my Gmail account set up with Mail.app currently. I have several folders set up on my Mac, and I have filters set up to send certain messages to certain folders. For instance, emails from [URL] go to an eBay folder.
i have this:
quartz file that is attached, its pretty cool, try it out.
my question is how to get it as an effect in iChat.
I've tried to troubleshoot this before. I've backed everything up on Time Machine, did an Erase/Install. Purchased MacKeeper. I restarted computer pressing shift key, then restarted computer to clear out any accumulated junk files. I've been running Virus Barrier for more than a year, and all filters are up to date. But it's getting worse! It used to happen once a day...today it happened 3 times. I thought it might be related to Chrome, but this morning, all I had open was Mail...
This is what happens: In whatever application I'm in, usually Chrome, after some action, sometimes just loading page, the rainbow time spinning wheel appears. Spotify stops playing music (though there is not window warning that I've gone offline or anything like that); I wait, wheel keeps going, I clicked on other open applications, they appear fine, go back to application with spinning wheel. I open force quit; I force quit application, it appears to quit, but then everything becomes unresponsive.
Eventually I try to force quit all other applications, they appear to close, but don't really, then Finder becomes unresponsive, I try to Relaunch Finder, until I only can stare at empty desktop. The only thing that works is pressing button at back of computer to force it to shut down and restart. From past personal experience both at work and at home (am a designer, so always use Macs)...a computer that keeps crashing this way, eventually becomes damaged and has to be brought to store for repairs. This computer is only 2yrs old.
Info:
iMac, Mac OS X (10.6.8)
I've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
View 26 Replies View Relatedwhat is bonjour, quartz extreme and sherlock 3?this are some of the features of mac 0s x version 10.2...
View 2 Replies View RelatedI ask because QTX can't play .qtz files and there is a beautiful screensaver I've been in love with since Tiger called Snowfall. You can download it here:
[URL]
Under Tiger and Leopard, the screensaver was amazing, but in Snow Leopard the screensaver is jittery.
I'm assuming this has something to do with it being a Quartz file? Does anyone know if the qtz file can be recompiled to work fluidly again? I've contacted the dev, but have heard nothing back.
Last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution.
Intel GMA X3100:
Chipset Model:GMA X3100
Type:Display
Bus:Built-In
VRAM (Total):144 MB
Vendor:Intel (0x8086)
Device ID:0x2a02
Revision ID:0x0003
Displays:
Color LCD:
Resolution:1280 x 800
Depth:32-bit Color
Core Image:Software
Main Display:Yes
Mirror:Off
Online:Yes
Quartz Extreme:Not Supported
Built-In:Yes
Display Connector:
Status:No display connected
How do I assign clips to my MIDI board notes? And is it possible to trigger multiple pictures at once or effects like fade in out?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3), Quartz Composer
As anyone found a way to create a video playing screen saver in Quartz Composer in Snow Leopard. These screen savers work fine in Leopard but crash System Preferences when you attempt to load them in Snow Leopard. They seem to work just fine within Quartz Composer.
View 2 Replies View Relatedlast week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution. I would really appreciate some help.
Intel GMA X3100:
Chipset Model:GMA X3100
Type:Display
Bus:Built-In
VRAM (Total):144 MB
Vendor:Intel (0x8086)
Device ID:0x2a02
Revision ID:0x0003
Displays:
Color LCD:
Resolution:1280 x 800
Depth:32-bit Color
Core Image:Software
Main Display:Yes
Mirror:Off
Online:Yes
Quartz Extreme:Not Supported
Built-In:Yes
Display Connector:
Status:No display connected
how do i use iMovies without a Quartz extreme graphics card? and if i cant, how do i get a quartz extreme graphic card?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
I just clean installed Mavericks on my Macbook pro. Finder is not working at all..
View 10 Replies View RelatedI just bought a macbook pro retina display OS X 10.9.4 and entered the data of my applestore account on the imessage app but each time I try to send a message gives me the following sign "+54 9 11 ....... is not registered with iMessage." although it is a registered number (my own iphone).
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Mavericks (10.9.4)
My MacBook Air is 2011 and the airplay mirroring is not working ...
Info:
MacBook Air, OS X Mountain Lion (10.8)
is desktop manager 0.5.3.dmg working on Macbook under MacOSX 10.9 ? I cannot get it working, icons tur up then off after 3 seconds. What's that ?
Info:
MacBook Air, OS X Mavericks (10.9)
My messages and FaceTime calls will not work on my macbook air. I am using OS X Mavericks 10.9.4. why these will not go to my computer anymore? They used to work just fine and appear in my notifications on both my macbook and iPhone and now only go to my iPhone.
Info:
MacBook
I have been facing many problems on connection to wifi with my MacBook Pro Retina (mid 2012)
I'm using mavericks and updated to 10.9.4.
My wifi is working well , when I am outside of home , but when I am at home wifi list will not display anything.
Even my iPhone wifi hotspot is not being displayed at home , but out side of home it's ok!!!
When I select join other network , after entering wifi name and password sometimes it can connect , and some times I need to reboot my Mac to connect.
I also installed Windows 7 using bootcamp , And every thing was working very well in windows.Â
for Solving problem I tried removing wifi Preferences files , create a new location , clean re-installing OS, but none of them worked.Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have an older macbook 3,1 running Mavericks OS and recently one of my left USB ports has not been:
1) able to eject external hard drives plugged into it (I have to force eject)-instead it gives me a message that one or more programs may be using it (even though I don't have any programs using it). The hard drive is being powered by USB has a 3.0 connection although this wasn't a problem in the past... I tried the other USB port and it can eject just fine from that port.
2)Intermittent communication with mouse. Not sure if this is a hardware issue but when I try to run diagnostics on this laptop by holding down the "D" key at startup it doesn't take me to diagnostics. I no longer have the discs for this laptop (containing said hardware test) so I can't boot the diagnostics from that discs.
In lieu of a hardware test I opened CONSOLE and did a search for USB and there were a couple of these messages:Â
8/29/14 12:13:43.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****Â Â
Is this a logic board issue? Would rolling my OS back to pre-Mavericks work? The problem didn't emerge right when I updated to Mavericks however I have had luck changing OS stuff (updating or rolling back) with faulty USBs...Â
Here are other troubleshooting methods I have attempted with no success:Â -Disk Utlity (repair disk and permissions)
-RESET PRAM NVRAM
-Remove battery
-RESET SMC
-Shut Down
-Run Disk Utility @ startupÂ
I'd like to get access to a Hardware Test compatible with my macbook. The links I have found online are to incomplete files.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a late 2010 MacBook Air that is running OS X 10.9.3 .
Lately I have noticed that my delete key is now working as a backspace key.
This is super annoying and I have tried googling the problem, but I haven't found a solution yet.
Also, my top row of keys (volume, brightness, etc,) are not working unless I hold down the fn key.
Info:
MacBook Air, OS X Mavericks (10.9.3)
The top row of keys on my keyboard are not working i.e. sound buttons do not adjust sound, same with brightness etc. They make a sound when pushed but the functions arent working. I have booted in safe mode and reset sound cache, I have check all settings in the keyboard section of system preferences.
Info:
MacBook Air, OS X Mavericks (10.9.4)
