Final Cut Studio :: Cannot Get Filters To Render In Clip

Jun 4, 2014

I am running Final Cut Pro 7 and I have a clip that already has RGB Balance filter and Key filter on it. I am adding Brightness Contrast or any of the other Gamma Correction type filters to the clip, It lets me adjust the filter but when I render it this filter is not included in the render. I have done some experimenting and it seems that the RGB balance is what is stopping this filter from being applied.

I have tried with all the possible filters that will let me adjust the levels on the image, I have tried taking the clip with the first two filters and nesting it then applying the new filter to the nested clip but nothing seems to work. This clip is too dark...

Info:
OS X Mavericks (10.9.3)

View 3 Replies


ADVERTISEMENT

Final Cut Studio :: Why Can't Save The Folder Locations Set For Render Files

Aug 22, 2014

I wrongly assumed that when you go to system settings to select the scratch disks (root folder where all the audio and video render folders and files go, capture files, etc.) that Final Cut would save the folder locations within the FC project you are working in. Makes total sense, but for reasons I don't understand, FC does NOT save these folder locations and the result is that I have render files scattered all over the place on my hard drive and it is quite a mess! Fortunately, the project file remembers where it put the render files, so as long as you don't remove or rename any project folders, everything shows up rendered on the time line as it should. The problem is, if I'm working on several projects at once, I have to reset the scratch disks every time I reopen a project, otherwise the program will save it to the last scratch location selected and put all of the render files in another project's folder. I often forget to reset the scratch disks when I'm busy and now I have render files mixed up in various project folders.  

Why can't you just set the scratch disks one time when you first set up the project and have the project always remember that location, instead of always having to reset them every time you reopen a project. I love Final Cut, but this is a product defect that should be addressed and corrected. If the project file can remember where it is putting all the render files, it should also be capable of remembering the scratch disk locations you originally selected when you first set up the project or better yet, save it to the project's root folder by default.

Info:
Mac Pro, Mac OS X (10.6.5)

View 4 Replies View Related

Final Cut Pro X :: Delete All Filters From A Selection Of Clips?

Jun 17, 2014

Is there an easy way to simple delete all filters from a selection of clips? 

If I select multiple clips and then delete the filter, it only deletes it from the one single clip where the playhead is, the others are untouched. 

If I make a cog standard clip, and then copy those attributes and paste it to the other clips as suggested it doesn't 'reset' those it merely dumps more filters on top or leaves the current ones untouched? 

Do I really have to go in and select and delete one single filter off every single clip?  There's a bunch of about 65 still frames I need to do this from and I can't bear the though of that. 

Info:
iMac (27-inch, Late 2012), OS X Mountain Lion (10.8.2)

View 9 Replies View Related

Applications :: Final Cut Pro Keeps Freezing When Try To Render?

Feb 18, 2010

Ok when I render at all it never EVER works. It has worked a couple times but recently I do everything people suggest and it doesn't work. I've converted both into the same format so it'll work, I've restarted final cut pro, I've restarted the computer, I've repaired disk permissions, i've done render all. All worked at certain points but for the rest it doesn't work. What am I doing wrong and how can I fix it?

View 3 Replies View Related

Final Cut Pro X :: How To Delete Render Files

Jul 1, 2014

So every time I got to edit my movie in FCP i lose 3 GBS of space... I have multiple render files for my project. Do i only need one? Can I delete all of them and create a render file after that so I only have one. Does it auto create render files? Does it delete stuff in the project if you delete it?

View 3 Replies View Related

Final Cut Pro X :: 10.1.2 - Media Management -> Render Files

Aug 20, 2014

Running FCP X 10.1.2 ... I wanted to verify a few things with the community about media mgmt that the white paper really doesn't explain to well. My archiving procedure is as follows: 

I import media to an Event to offload footage from camera/card. I then close FCP X, open the finder and open the library and "show package contents" and then pick the original media folder. I then copy that folder to another offsite drive I have dated by year -> folder. 

Example: 2014 - Footage from Colorado.  (I do this to always store my original media outside any project I'm working on for future reference. This is ok, correct? Is there a better way?) 

Second, I learned the other day that if I want to archive/backup libraries or even clean up the library,it is good practice to remove all rendered/transcoded media files. It is pretty simple from the "file" menu to do this. Question, if I just removed the rendered media, how long does it take again before FCP X background tasks starts working / rendering media again? Do I stop this somehow so I have time to backup the library? I thought this process was automated after a few seconds? 

Info:
iMac, OS X Mavericks (10.9)

View 14 Replies View Related

Final Cut Pro X :: Does Not Render Since Updated To Latest Version

Sep 10, 2014

I updated my Final Cut Pro X to version 10.1.3. Now if i want to create a project and ad clips, these clips are not rendering.

Info:
Final Cut Pro X, OS X Mavericks (10.9.4)

View 2 Replies View Related

Final Cut Pro X :: Any Way To See How Much Time Left To Complete Render

Dec 2, 2014

I was wonder if Final cut pro x have the ability to show how much time is remaining in the rendering process...like premiere or final cut 7 use to, if I remember correctly...Same thing with Compressor 4.1.3

Info:
Final Cut Pro X, OS X Mavericks (10.9.5)

View 8 Replies View Related

Applications :: Final Cut Pro Keeps Freezing When Export/render A Video?

Mar 28, 2009

I've been working on some making some video clips that are ipod commericals (to eventually do the whole thing on imovie) but after 4-5 videos being finished, I work on the next one and right in the middle of rendering, it just freezes and doesn't do anything else, or when I try to just export it it does that, but before it works fine. I tried removing a couple extra effects I aded, and it still does it.

View 2 Replies View Related

Final Cut Pro X :: Burn 1 Hour Movie - It Seems To Render But DVD Is Blank

Dec 2, 2014

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned a project using iMovie afterwards. I filmed a funeral service and family get together afterwards but can't share it with family and friends...

Info:
iMac (27-inch Mid 2011), OS X Yosemite (10.10.1), 2.7 GHz Intel Core i5, 4 GB 1333MHz

View 3 Replies View Related

Applications :: Cannot Save Or Render In Final Cut General Error Message With No Number

Sep 27, 2009

I just opened a FC project in 6.0 from an XML file for the first time. The project originally came from 6.0.6 and I was happy to see that this kind of reversion was actually possible. Unfortunatly after doing a little work I started getting "general error" messages whenever I tried to save the project or render any transitions.

If I remeber correctly, I opened the XML and was asked to save a new project. I saved the project and started working. I dont remeber if any saves or rendering had worked in the new project before I got the error messages. Maybe none of them worked, I am not sure.

View 2 Replies View Related

Final Cut Pro X :: Regenerating A New Clip?

Aug 31, 2014

In compositing, I sometimes need to use snippets from previous episodes, e.g an audio grab from an older program, or a 5 sec preview.  

Is there a fast, direct way to regenerate that grab within my new movie so I don't need to save the entire source movie along with the back up of my new movie?

Info:
MacBook Pro, Mac OS X (10.6.8), Intel Core 2 Duo 2.53 GHz 8GB RAM

View 5 Replies View Related

Final Cut Pro X :: Multicam Clip Editing?

Jun 30, 2014

I am able to create a multicam clip, and when I double click it it drops to the timeline & appears in my Angles viewer. However, when I hover my mouse over the 3 different angles it doesn't change to the blade, nor does clicking the clips themselves seem to make any cuts.  In short, I have a multicam clip that I can set up but cannot edit. Have the Pro Manuals & watched many how to videos but I cannot tell what I'm doing differently.

View 5 Replies View Related

Final Cut Pro X :: Synced Clip Won't Stabilize

Jun 6, 2014

I have a long videoclip that i have spent hours keywording. The masterclip was first synched with audio from a external source, the keyworded into smaller sections. These sections cannot be stabilized... The stabilize function is not in the inspector for these clips.

Info:
Final Cut Pro X, iOS 7.1.1

View 1 Replies View Related

Final Cut Pro X :: 10.1.2 - Compound Clip Location?

Jul 1, 2014

Using FCP X 10.1.2.

After I create Compound Clip, I open the Inspector Window to see the location of where this clip is residing. But it just states (in the Inspector Window) under Location is (Multiple Files). 

Is the CC just acting as a pointer to the files that I created the CC with ... or am I just not looking at the correct location / information? 

View 2 Replies View Related

Applications :: Final Cut Express 4 - Enlarging Clip?

Mar 2, 2010

I recently cropped a clip but I still want it to take up the whole screen, the reason I cropped it was because I did not want the unnecessary space. Is there a way that I can enlarge the clip so that it takes up the whole screen again?

View 2 Replies View Related

Final Cut Pro X :: Reveal Event Of A Clip In Browser?

Nov 30, 2014

I have a Library containing 22 Events which are numbered instead of named. Each event contains Green Screen clips whose thumbnails all look the same. I found the set of (Piece to Camera) clips I want, using a keyword search of the Library - but now I want to create a Compound Clip in the relevant Event so that I can do a rough edit (discard unsuitable and duplicated narrative etc). 

Next, I want to copy the remaining good clips from this Compound to a new Project - in a different Library. I don't want to copy the unwanted clips.My problem is, finding the Event these clips originated from. I can use the disclosure triangle on each Event in turn, but surely there's a better way to find the parent Event of a clip in the browser?

Info:
Final Cut Pro X, OS X Yosemite (10.10.1)

View 6 Replies View Related

Final Cut Pro X :: How To Move Clip Up / Down But Locked In Place

Sep 3, 2014

In FCP 7 I'd just hold down the Shift key when moving clips up or down (on tracks).  What would be the keystroke to do that in FCP X?  So I can move audio clips up and down, but not sideways?

Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)

View 2 Replies View Related

Final Cut Pro X :: How To Reconnect Video And Audio Of One Clip

Jun 19, 2014

how to reaconnect video and audio of a one clip, after you have detached it

View 1 Replies View Related

Final Cut Pro X :: Changing Imported Clip To A Link

Sep 7, 2014

I changed my mind on my workflow and want to link to external media rather than copying them to my libraries.That said...Is there a way to change the clip references?I went into the "Original Media" folder of the library, deleted the clip.

Then when I went back into the library, and went to "relink" the missing media. I navigated to the clip on the external source.However, it automatically created a copy again.  I didn't see anywhere where I can opt to relink it as an external link rather than copy to library. 

View 1 Replies View Related

Final Cut Pro X :: Reveal Clip In Event Folder In Timeline

Jun 24, 2014

I am using FCP X 10.1, I know I can right click Clips in the timeline and reveal it in the " event browser ",

I am just wondering if there is a way to do it " the other way around " , I want to use any clip in my event browser and reveal it in the timeline ?  

View 2 Replies View Related

Final Cut Pro X :: Change Clip Duration From Front In Dashboard?

Sep 5, 2014

I have several clips in the Timeline that I want to change the duration.  I just want one frame taken away from each clip. So I click on the clip in the Timeline, then Control+D to show duration in the Dashboard. I type in the new duration I want, which is one frame less. It takes one frame off the Back of the clip.  How do I get it to take the frame off the Front of the clip?

Info:
Final Cut Pro X, OS X Mavericks (10.9.4), 3.5Ghz intel Quad-core i7, 16 GB RM

View 1 Replies View Related

Final Cut Pro X :: Move Clip Connections From Bottom Timeline Rather Than Top One

Aug 22, 2014

I'm doing a quick promo. I recorded a rough script VO, organised my clips and music. 

I then had the professional voiceover artist record a revised script. 

However, I can't simply replace my original script as we have added a couple of things. What I would have done under 7 is lock the background music and video clips in place, remove the VO timeline, and then replace each bit separately. However, I can't do that because the video clips have connected themselves to each other. 

I also have shuffled a couple of things around so need to keep the video the same, but move the audio to a different part. I can move the video without moving the audio, but I can't move the audio without moving or deleting the video. 

View 1 Replies View Related

Final Cut Pro X :: Secondary Audio Longer Than Video Clip Of Same Take

Sep 4, 2014

I did a shoot with audio on a green screen stage. I have some video clips of my actors shot on a RED Scarlett in 4K 29.97.I have audio clips recorded on a Zoom H4 with a boom mic at 16 bit 44.1 khz. 

I take the 2 clips in FCP X and I create a synchronized clip. The video clip doesn't have an audio channel so I have to manually sync using the slate. I have the correct audio clip and the correct video clip, but the audio clip is longer than the video clip. It's just running a tad slower than the video clip. I tried creating a project in 44.1khz instead of 48khz and FCP X didn't treat it any differently.

View 1 Replies View Related

Final Cut Pro X :: How To Get Original Timeline Clip Appearance Back

Aug 29, 2014

Was poking ignorantly into the features of the project library of a project I had on the timeline. Something I did made the project on the timeline to change in appearance to this: 

What I had done to get the appearance of clips to change and what I should do to get the appearance back! 

Info:
iMac, OS X Mavericks (10.9), garage band, FCPX:10.0.9 version

View 8 Replies View Related

Final Cut Pro X :: Impossible To Import A Range From QT Movie Clip?

Jun 4, 2014

It's easy to select part of an AVCHD clip to import but I still can't import a range from a .mov file on my HDD. 

Is it impossible or am I just doing it incorrectly?

Info:
iMac, OS X Mavericks (10.9)

View 6 Replies View Related

Applications :: Will Final Cut Studio 2 Run On My 13.3

Apr 24, 2009

Will Final Cut Studio 2 run on my 13.3 inch 2.6 ghz Alum Macbook?

View 3 Replies View Related

MacBook Pro :: Will Final Cut Studio Run On The New MBP?

Jul 4, 2009

Will Final Cut Studio Run on the New Macbook Pro

Macbook pro 2.53GHz both 13" and 15"Rocks

View 7 Replies View Related

MacBook Pro :: Can All Run Final Cut Studio 2

Jul 8, 2009

Can all of the Macbook pros run final cut studio 2

View 2 Replies View Related

Applications :: What Is In The Final Cut Studio 2 Box?

Nov 14, 2009

I have Final Cut Studio 2.0.1. Retail version. I got it with a 2nd hand MBP I bought recently, and I plan to sell FCS2. I have no need for it, iMovie is fine for me.

But I don't have the big fancy box or manuals included... what is meant to be in the box?

I do have...

- 9 installation CDs in the small black apple box.

- Final Cut Studio Software License agreement.

- 'Installing Your Software' documentation with serial numbers.

- Apple Software 'Proof of Purchase' coupons.

If anyone has FCS2 and can tell me what I'm missing, I can advertise it more effectively and truthfully!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved