OS X :: Bonjour, Quartz Extreme And Sherlock 3 Are The Features Of System?
Oct 3, 2009what is bonjour, quartz extreme and sherlock 3?this are some of the features of mac 0s x version 10.2...
View 2 Replies
ADVERTISEMENT
OS X :: Quartz Extreme Stops Working After A While?
Feb 20, 2008I'm running 10.5.2 on a 2GHz C2D BlackBook. Recently I've encountered 3 symptoms that suggests Quartz Extreme stops working after the computer's been running for a while (and by a while, I mean it could only be a couple hours).
I've recently (a few days ago) set my desktop picture to change every minute. It's supposed to fade smoothly between pictures, and it did for a while, but then eventually I noticed the fading transition had stopped and the pictures were just switching without any kind of transition. The problem was resolved after a restart.
I don't use iMovie often. But I opened iMovie '08 yesterday and I got the following error message: "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics cards does not support Quartz Extreme." My only option was to quit iMovie. I noticed my desktop picture was also not doing the transitions any more. After a restart, both problems were resolved.
Today, I got the same error message in iMovie and the desktop isn't transitioning again. I haven't restarted yet, but I assume it will fix itself when I do. Also, I tried adding a widget to my dashboard to see if I get the ripple effect, to test my theory that Quartz Extreme (or is it core image, or core graphics?) stops working after a while. I did not get the ripple effect I usually get when adding a widget.
Since I just started using the changing desktop feature and 10.5.2 is a new update, I don't know if one of those could be causing the issue. I'll try turning off the desktop transitions and see if it continues.
Power Mac G5 :: Radeon 9600 Pro - Quartz Extreme Not Supported
Oct 15, 2007I've just got a Radeon 9600 Pro PC/Mac edition, as the 9600XT that came with the G5 died on me last week. It's taken an age to get it working, I could only boot in safe mode, in the end I deleted all my existing ATI extensions, installed the ATI Displays 4.5.7 and it works. BUT ... (and it's a big but)... performance is VERY slow and System Profiler says Core Image and Quartz Extreme are not supported. If anyone's got any ideas I'd be most grateful.
View 26 Replies View RelatedOS X :: Imovie Requires A Graphics Card That Is Compatible With Quartz Extreme?
Mar 15, 2009Last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution.
Intel GMA X3100:
Chipset Model:GMA X3100
Type:Display
Bus:Built-In
VRAM (Total):144 MB
Vendor:Intel (0x8086)
Device ID:0x2a02
Revision ID:0x0003
Displays:
Color LCD:
Resolution:1280 x 800
Depth:32-bit Color
Core Image:Software
Main Display:Yes
Mirror:Off
Online:Yes
Quartz Extreme:Not Supported
Built-In:Yes
Display Connector:
Status:No display connected
MacBook Pro :: Requirements For Quartz Extreme And Core Image Graphics?
Jun 4, 2012So I cant use my mac book pro that I just bought with Imovie? (I just bought a mac book pro and I cant use Imovie because the Quartz whatever is not compatible with my graphics card?)
Info:
MacBook
Pro, Mac OS X (10.7.4)
OS X :: Unable To Run Imovie / Requires Graphics Card Compatible With Quartz Extreme
May 3, 2010last week i tried getting into imovie, and a message comes up. It says "imovie requires a graphics card that is compatible with quartz extreme. One or more of your graphics cards does not support quartz extreme." I have been on a couple forums where people have had the same problem, and there doesn't seem to be a solution. I would really appreciate some help.
Intel GMA X3100:
Chipset Model:GMA X3100
Type:Display
Bus:Built-In
VRAM (Total):144 MB
Vendor:Intel (0x8086)
Device ID:0x2a02
Revision ID:0x0003
Displays:
Color LCD:
Resolution:1280 x 800
Depth:32-bit Color
Core Image:Software
Main Display:Yes
Mirror:Off
Online:Yes
Quartz Extreme:Not Supported
Built-In:Yes
Display Connector:
Status:No display connected
OS X V10.6 Snow Leopard :: Requirements For Quartz Extreme And Core Image Graphics?
Jun 25, 2012how do i use iMovies without a Quartz extreme graphics card? and if i cant, how do i get a quartz extreme graphic card?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
Hardware :: Bonjour Printing To AirPort Extreme With Windows
May 17, 2009I have an HP C4200 series printer hooked up to my AE, which works flawlessly with both of my macs. My dad has an HP laptop that he uses (can't get him to switch) and I cannot get it to print to that printer for the life of me. I have installed the latest bonjour set up wizard and it sees it fine, but when I try to print to it, nothing.
View 1 Replies View RelatedHardware :: AirPort Express / Extreme Update (New Features)?
Oct 14, 2010I'm in the market for a new Express or Extreme. I know Apple just announced an event for next week focusing on Macs. Is there any features that either of these are lacking making them candidates to be updated?
View 16 Replies View RelatedHardware :: Why IPad Is Missing Many Features In System
Jan 29, 2010I would have liked a camera, ability to watch anything on-line and multitasking, of course, Apple can't add a camera this time around but they can certainly keep their pulse to the ground and add features via software. I also wonder, like those hackntosh groups, that since this is more of a computer then phone, if that community will develop programs? Which begs the question, why not release it from Apple if it's something the consumer wants and make a few dollars from Apple while doing it.
View 8 Replies View RelatedIMac :: Best Source To Find Out All About System And Its Features
Apr 12, 2009It seems I have to go a roundabout way in order to connect to the Internet using a USB Dial-Up modem. I thought you could double click on the Safari icon on the Dock and get connected to the Internet. But every time I try to do this, the Diagnostics page keeps cropping up. The only method I have found to get connected is thru the Network folder under System Preferences, which to me is a backhanded alternative to what should be a more direct means by clicking directly on the Safari icon. Is there something wrong with my Internet set-up causing this run around? Also, I am unclear as to whether my 20" screen is setup properly?
Is it true that in order have the sharpest screen readout/visual appearance and still cover the complete display area that everything seems actually smaller than when compared to a 17" inch display usage (which is the size of the LCD monitor I am using with a Power Mac). Finally, what is the best source to find out all about my iMac & its features? The documentation sent is very scant. Aside from the petite booklets (with same information repeated on the computer), is there any extremely pertinent guide I am overlooking that comes with the computer? Any other major sources?
Mac Pro :: Potential Features Would Blow Current System Away?
Apr 16, 2010I am tempted to jump on getting a new Mac Pro now instead of waiting. Primarily because i dont want to be priced out of getting the higher end model with more cores. If they do come out with a 6 and 12 core config. i would want to buy the 12 core but a lot of rumors around here and on other sites say that the new models will likely come with a price increase. potentially leaving me having to buy the 6 core model. 8 core current Vs 6 core future This makes me think i'll just get the 8 core current. BUT Are there any features that apple may add that would blow the current models away. USB 3.0, BluRay, etc. I can live without many of these things.. but perhaps i am missing something.
View 24 Replies View RelatedSoftware :: Unable To Find Sherlock?
Jan 25, 2010by mistake lost Safari html folder with all stored info and unable to find it; on my old iMac ,I was using Sherlock to find missing file;on this one there is no Sherlock (or I am unable to find it) My unit is 17"iMac OSX version 10.4.11 -1GB 667 MHz about 4 years old; also on the folder installed now on my side strip reappeared big question mark (?)- what this mean?
View 6 Replies View RelatedSoftware :: Sherlock On The Desktop Dock?
May 21, 2009Since getting Leopard OSX, I am unable to get Sherlock. I really liked the ease of having it there and used it often.
View 1 Replies View RelatedOS X :: LaCie Big Disk Extreme Failure Occurs In My System
Jul 6, 2009I have a 1 TB LaCie Big Disk Extreme 2 that is actually made up of 2 500GB drives. It failed on me. I have most of it backed up but there are a few things I would like to recover. I tested another power cord and it didn't work. So I talked to a few people and they said that if I bought a new seagate controller board that matches my 500GB drives identically I would be able to get the data off one drive at a time. There is some good and some bad. When I tested the new controller board on each drive (one at a time only because I only have one new controller board) they both started up normally! Success I thought.. but no.. Both Leopard and XP said "drive needs to be formatted" or "initialized".
View 21 Replies View RelatedOS X :: How To Get A Quartz Composer File In IChat/Photobooth
Dec 15, 2008i have this:
quartz file that is attached, its pretty cool, try it out.
my question is how to get it as an effect in iChat.
OS X Mavericks :: Quartz Filters Not Working On MacBook Air
Jul 1, 2014I have a Mac Book Air running the latest OS. I created a document in Pages 5. Printed it to PDF then opened it in Preview to apply the Grey Tone filter. I export it and choose the filter, but it doesn't apply. I can't apply any filters, at all.
View 2 Replies View RelatedApplications :: Did Snow Leopard Abandon Quartz Composer?
Nov 15, 2009I ask because QTX can't play .qtz files and there is a beautiful screensaver I've been in love with since Tiger called Snowfall. You can download it here:
[URL]
Under Tiger and Leopard, the screensaver was amazing, but in Snow Leopard the screensaver is jittery.
I'm assuming this has something to do with it being a Quartz file? Does anyone know if the qtz file can be recompiled to work fluidly again? I've contacted the dev, but have heard nothing back.
OS X V10.7 Lion :: Trigger Video Clips With MIDI In Quartz Composer?
Apr 4, 2012How do I assign clips to my MIDI board notes? And is it possible to trigger multiple pictures at once or effects like fade in out?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3), Quartz Composer
OS X :: How To Disable Bonjour
Feb 11, 2009Not Finder > pref > sidebar
I want to disable MY mac from showing up on other peoples Macs "shared sidebar" at school. We use the same network or same wireless router. I went to my shared folder and disabled EVERYTHING and made sure I have a password now not in the dictionary.
So. Can my Mac be accessed, viewed or seen now? Can someone view my screen remotely (hack) using Bonjour WITHOUT ME KNOWING IT?
I see tons of other computers on my side bar but i am worried they see mines and can some how control it without me knowing. I do know not to click any strange links from emails and such.. Like I said I've disabled ALL sharing and just made a password.
OS X :: Quartz Composer Movie Screen Saver Broken In Snow Leopard
Sep 4, 2009As anyone found a way to create a video playing screen saver in Quartz Composer in Snow Leopard. These screen savers work fine in Leopard but crash System Preferences when you attempt to load them in Snow Leopard. They seem to work just fine within Quartz Composer.
View 2 Replies View RelatedOS X :: Can't Find Bonjour Printers
Aug 15, 2009I have recently freshly installed Leopard and upgraded to 10.5.8 before attempting to print on my Mac Pro.
When I tried to add my printers it found nothing. I also have a Mini on 10.5.8, on which I deleted both printers and they were both located and added straight away.
Having spent the afternoon searching for answers, about the only hint was to change to a static IP, rather than use DHCP. After doing so, one of my printers showed up immediately, but then OS X could not resolve what drivers to use. It still didn't find the second printer.
We have four 10.5.8 Macs and two 10.4.x Macs on the network. All except the Pro are happily using both printers, so it must be something dodgy on my Pro, just no idea what.
I've got the firewall set to allow everything and I've got print sharing turned on. All the Macs and printers are on the same subnet.
Edit: I should add that the printers' web interfaces are fully accessible, and of course they ping fine.
Software :: MBP Not Showing Up On Bonjour / Why Is This?
Sep 15, 2010I have two MBPs.
Both used to sync some apps nicely, using Bonjour to see each other.
Nothing has been changed in settings or home network that I can recall, and yet one machine now no longer shows up under Shared, hence I can't sync the machine.
I've disabled the firewall on the machine in question.
I checked also that Bonjour was running using:
sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist
I also ran Bonjour Browser on both machines and neither reports seeing the "bad" machine.
Any ideas why one machine no longer shows up under Bonjour?
Hardware :: AirPort Extreme (2009) Support Multiple Xbox 360s For System Link?
Dec 10, 2009Is it possible to plug three Xbox 360s into an AirPort Extreme for the purposes of system link and Xbox LIVE for each of them?
View 4 Replies View RelatedHardware :: Print Via AE Without Installing Bonjour
Jan 19, 2009My employer has strict policy regarding non essential software, so installing Airport Express drivers & Bonjour to run my Canon MX130 printer is not an option. I want to add the printer on its AE network into my work PC and not add software is this possible? and how would it be done? The snag I have run into so far in my efforts is that I cannon get an IP address from the AE. How does one go about doing this?
View 16 Replies View RelatedOS X :: Determine SL - Registered Bonjour With Router?
Sep 1, 2009I like when Mac products "just work" -- except when they don't. In this case, I have a 2009 MacBook Pro and a mid-2007 iMac. I also have a 500 GB Time Capsule updated to the latest firmware. Not that it should matter, but I also have MobileMe. I've turned on the "wake on network" feature on the iMac. If I tell the iMac to stay awake, I can reach it fine (same as in Leopard). If it goes to sleep, it's unreachable. The way it's supposed to work, from what I'm reading, is that it's supposed to be accessible by advertising to the Time Capsule that there are services available (e.g. file sharing, screen sharing, etc). how can I be sure it's properly advertising this info to the Time Capsule?
View 1 Replies View RelatedOS X Mavericks :: How To Share Printer With Bonjour
Jun 17, 2014Does Apple publish detailed instructions on how to share my second computer (Air) by using Bonjour?
Info:
OS X Mavericks (10.9)
Applications :: Cannot Send IChat Messages Through Bonjour
May 7, 2008We have one user who cannot send outgoing iChat messages through Bonjour. If he adds the person to his buddy list, he can IM anyone with no problem. The problem basically extends because if someone were to IM him through Bonjour, he can see incoming messages, but those people can never see anything he types in response.
View 4 Replies View RelatedOS X :: Changing A Systems Broadcast Bonjour Icon?
Apr 13, 2009I have a mac mini running leopard server that is gong to be replacing an ubuntu server machine that sits in my closet. the ubuntu machine is great because i can configure avahi to broadcast itself as an xserve and it shows up in finder as a server. i have no idea how to change the broadcasted system type in osx though. sure it's a little gimmicky, but i suppose i just enjoy seeing the little xserve icon in my sidebar.
i know that the icons are located in /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/ and i could just rename the xserve icon to the macmini icon, but then every mac mini on my network would show up as an xserve.
Applications :: Bonjour List In IChat - Cannot Set AIM Account
May 7, 2009I've had a Mac (OS X 10.5.6) for about a year. I "set up" my iChat months ago, and don't remember what I did, but when I open it, a window called "Bonjour List" comes up with my name and picture with a little green video camera beside it. When I click the 'Buddies' drop-down menu, every option is grayed out.. as are almost all of the options on the other drop-down menus. Under the 'iChat' menu, beside Accounts it only says Bonjour.
I don't know what Bonjour is, and don't want to use it on iChat. I'd like to set it up with my AIM account but have no idea how to do so. Is there a way to reset iChat so that it asks me again what account I'd like to use and I can choose AIM? Or any other simple solution? Also.. I just took a screen capture to post here, and have been trying to Draw A Line on it to cover my name for 15 minutes.
