I'm working with Mavericks, iMovie 10.0.5 on OSX 10.9.4. I want to lower a small section of sound within a video clip without having to lower sound for the entire clip. I could do this in the previous iMovie version. How can I do this now?
Info:
iMovie '11, Mac OS X (10.6.8)
I can't adjust the sound level on my iMac keyboard? The screen just disappears but the sound level remains the same
Info:
iMac, Mac OS X (10.7.5)
i have a macbook that is a few years old. a small horizantal 'section' about 1 cm wide has lost sensitivity to tracking and clicking? ever run into it before? hoping it isn't the end of life for something..
Info:
MacBook
I recently bought an ACD which I hook up to my MacBook. I watch videos and movies on it late at night so instead of playing it through the speakers I prefer to play it through headphones so I don't keep everyone up.
This works great with iTunes. I plug them into my MacBook and off I go. For VLC, however, it STILL plays the audio through the speakers even though my headphones are plugged in.
How do I change it so the audio plays through the headphones when plugged in using VLC instead of the speakers. (Jeez, you'd think this would be basic functionality. >_>)
I bought my iMac last month (Late-2013 model) and notice some low/small "tick-ing" sound came out from the bottom section of my iMac i guess. I often hear that when there's no other sounds in my room. It happened whenever i scrolling down web page on Safari or when doing some graphical process on Photoshop, scrolling Dashboard and other graphical-related task.
Info:
iMac, OS X Yosemite (10.10.1)
I'm a newbie coming over from MS for 12 years. Last week I recorded a short clip in iMovie...how neat is that
Tonight I recorded one again and now there is no sound when I played it back. I know I've fiddled with things in system preferences so maybe I set something that has now affected the sound in iMovie
I've checked all the obvious volume controls, they're all up and on.
I watched a video and it was very loud so I went to System Preferences and turned the sound down.But now I can't mute by clicking the F9 button as I normally can. I can mute by going to System Preferences but I don't want to do this.Before I changed the volume in System Preferences, the keyboard keys worked fine for volume adjustment. I could make it quieter, louder or mute.I have tried with checking and not checking the option to display volume on the screen (in System Preferences).
Info:MBA v 3.2, 256GB SSD, 2.13GHz, 4GB, Other OS, 10.6.8
My Macbook Pro 15" [2 GHz Intel Core Duo, OS X 10.5.7, 1 GB 667 MHz DDR2 SDRAM] makes a loud crackling, chainsaw-like noise from the upper left part of the keyboard. I think it maybe the fan but I'm not sure. I've attached an audio clip of the noise:
20091009 175820.m4a - 3.78MB OR (in case the first one doesn't work)
There are some apps on my iMac that I want to make sure don't have online access, because I know some apps have access when you don't know about it.
Info:
iMac (21.5-inch, Late 2013)
I have Final Cut Express 4 running on an iMac with Leopard 10.3.5. The problem I have is I cannot hear a music track & the sound track on the film clip at the same time when I run the clip. I only hear the clip sound track until it finishes then the music track plays. If I drag the scrubber bar along the time line I can hear both the music & the Clip sound track together. This only happens when I logon to the Mac as an Administrator. (I have never managed to hear both sound tracks together whilst logged on as Administrator.)
In desperation I created a user account on my iMac. If I logon as a user Final Cut Express 4 works ok ? I hear both sound tracks together when I play the clip. Any ideas how I can make the Administrator account work as the User account does? As the iMac is only used by myself I don?t need any user accounts.
Why are there no listed web sites in the plug-in section of the manage plug-ins section of safari preferences?
Info:
iMac, Mac OS X (10.6.8)
I own a Sony Cyber-shot camera, and a 24 inch IMAC computer. I took a short video clip and downloaded it to Iphoto (no problem doing that). I then downloaded the clip to a 4 gpb flash drive, as an mp4 video. My problem is that my friends Microsoft based PC can't play it.
View 1 Replies View RelatedIs it possible to move an item from the "More" section of the Contextual Menu up to the main section? In the attached screen shot you can see an item "Snag Path Unix" at the very bottom. I use this function about 100 times a day and it is very inconvenient that I have to go through a submenu for that.
View 1 Replies View RelatedIt's my understanding that the start up chime you get when you start up on any Mac,c an NOT be changed because that sound is in the firmware. Cool.
That being said, is there anyway to add/hear your own custom sound clip AFTER that?
Does any one know how to do it?
I just updated to Mavericks, and it is not as scary as I thought, however I use lots of attchments and ther used to be a slider to make the icons larger. Now they are uber small and very hard to read or see. Is there any way to make them larger?
mail 7.3
os 10.9.3
Info:
Mac OS X (10.7.3), 2.8 GHz Intel Quad Core i7 8GB 1067 MHz DDR3
We're hunting for a small printer for a crowded office space. There's a not much desk space or shelf space.
Only need something to print. No scanning, faxing or other functions! Hoping we can get Canon that is compatible with the inkjet 40 and 41 cartridges as we already have a printer that uses those.
Requirements:
Text documents
Photo printing
I've updated to OS 10.9.4. Now I have no sound from the internal speakers or my firewire sound interface ( Mackie Onyx 1640i ) I have tried different configurations in Audio setup. Also, I recently updated my Cubase DAW software to Artist 7.5. iMac.
Info:
iMac, OS X Mavericks (10.9.4)
I upgraded to 10.9.4 today. After doing so the internal speakers output option is not available in the Sound control panel. My only selections are the Soundflower output choices from my previous install of Soundflower. how I could restore normal sound output to the speakers?
View 11 Replies View RelatedWhere (I'd assume /System/Library/Sounds somewhere) the "Message Sent" sound is? In OS X Mavericks, in the Messages app, they removed the ability to set a custom "Message Sent" sound, so it appears I'll have to do it the hard way, by replacing the existing sound file. I just need to know where that file is.
View 5 Replies View RelatedI turned on my mac tonight to find that the screen has gone funny. there are marks inside the screen that look like water marks. The sound is also not working when I try to play videos. I can hear a crackling sound. it all worked perfectly last night but on shutting it down I updated a recommended software update.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a really weird problem with my sound on my Late 2011 Macbook Pro. The only sounds I can hear from the internal speakers are system sounds. No other audio can be heard from iTunes, VLC, browsers, etc. The only sounds I can hear are the ones found in "System Preferences -> Sound -> Sound Effects" and iMessage notifications. For a while, I could hear the volume up/down chirp, but even that's gone now.
Everything is fine when I plug in headphones. I thought it was the microswitch in the headphone port, but the Macbook Pro defaults back to "Internal Speakers" when the headphones are removed. Resetting the SMC and running the normal Disk Utility routine doesn't work either. It doesn't seem to be a hardware issue with the speakers, either, or I probably wouldn't be able to hear only these specific sounds.
Info:
MacBook Pro (17-inch Early 2011), OS X Mavericks (10.9.4), 8GB, 2.2GHz i7, 500GB HD, 1GB GPU
Things now sound squeaky , I tried adjusting the bit rate thro MIDI, tried all combinations but to no effect.
Is there a way to rollback to a earlier version ?
Info:
MacBookPro, Mac OS X (10.6.8)
I have a mid 2009 13 inch MBP and am trying to output sound through a bluetooth device.
The bluetooth device is a BCK-08 Slim AD2P Stereo Bluetooth Receiver
[URL]
Once connected as a device, nothing shows up in sound output though.
I can easily connect it to my iPhone 5 and output stereo music sound through it so I know the bluetooth device is working fine.
are there any external tools I can use to assess the situation? I seem to recall the old bluetooth setup assistant would ask what you wanted to use the device for while setting up.
Info:
MacBookPro, OS X Mavericks (10.9.4)
Having just migrated from 10.6.8 where this problem didn't exist, I don't know where or what might be causing this in 10.9.3.
I run the JRivers music program Media Center and the normal player feeds the digital stream out the usb port to my DAC. It has 2 modes, starting up with exclusive access and not starting with exclusive access. I have tried it both ways with identical results.
If I run music thru the JRivers app and out the usb and then stop the player to have a browser (safari or firefox) play a video, the audio portion of the browser audio is sent to the front panel speaker and not to the usb port.
This wasn't the case with 10.6.8 where I would switch back and forth frequently. Now I have to restart the mac in order to 'release' the usb port back to the browser.
That is until I run the Media Center over usb.
I have run Audio Midi Setup, to see if I can 'release' the usb port, to no avail.
My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.
Yesterday had sound and no today nothing. Not on Logic, except midi keyboard, no audio in Quicktime, no audio on the internet, and no audio in iTunes. Computer went into a slight sleep. This no longer exists to delete it: /Lib
rary/Preferences/com.apple.soundpref.plist and I deleted /Library/Preferences/Audio/com.apple.audio.DeviceSettings.plist/Library/Preferences/Audio/com.apple.audio.SystemSettings.plist
and I PRAMed Restarting and still nothing!
Info:
Mac Pro, OS X Mavericks (10.9.1), Logic 9 and Logic Pro X
I am on Mavericks 10.9.3 (brand new MB Air 13.3). I configured Mail with my IMAP accounts and it is able to send and receive mail. The problem is that the sound stops working after a while. When I sleep and wake the computer, at some point, it no longer makes the whoosh when sending a message. None of the other sounds work either. I have updated everything very recently.
View 1 Replies View RelatedWhat cause the youtube sound to fail?
Info:
MacBook Pro, os 10.9.5
This situation began when I put my Imac on sleep. After, the screen turned on in black whit the cursor but I couldn't do anything.
Then to rebooted the machine, the apple logo and sound began fine but the screen turned off, so moving the mouse the screen turned on in black with cursor.
I'd tried many ways, resetting the PRAM, SMC, repairing the disk and permission, analyzing hardware, repairing fsck files.
Suddenly, when I entered in Verbose mode, mi imac brought into user choose screen and worked fine, but when I shut down and tried to start my mac in the next day, it didn´t work again.
Info:
iMac, OS X Mavericks (10.9.3)
I was just wondering why there are so many ".caf" files in the "all documents" section of my new MBP and if I should just ignore them if they are part of something else like GarageBand.
View 6 Replies View Related