I installed a second hard drive, installed iphotomanager, merged some iphoto libraries onto the new drive and all was working fine. I changed some permissions ("unlocked" all of the drives as the merge was having trouble writing to the new drive but then it worked fine after I unlocked). Then I started getting the message again that it could not write to the iphoto library plist and the merging stopped working. So I thought maybe if i restart the computer, it would sort itself out but noooo, now it won't start.
It just starts to power up then you hear the drive die down. Tries over and over. So I took out the new drive I'd merged all the iphoto libraries on (which had been working fine until it didn't). But i suspect it had to do maybe with me changing permissions in the middle of the process maybe?
I tried restarting in safe mode, by holding down the shift key when I heard the start up tone until the grey screen with apple logo and spinning wheel appeared, and it takes longer now, but still ends up trying to restart and never gets to the login screen.
I have my Mac Pro installation disc 1 but can't find any others. I have Disk Warrior 4.0
But I can't get the disk drive to open since it won't start.
I received an iMac G5 from this old couple, they were going to throw it out, but all it needed was a power supply which I bought and replaced. It's been about 9 months and everything worked great, no problems whatsoever.
Three days ago, I shutdown the computer and when I booted the next day, it would only reach the Apple logo and the spining wheel, the fans would blast loud and then it would shut down and restart again, repeating the same thing over and over. I cannot start it under Safe Mode nor it recognizes the CD when booting.
I emptied my cache on Safari and my computer stayed frozen for a few minutes. I decided to re-boot, but every time I do so, it goes from the gray Apple screen to a blue screen and stops right there. I don't get the spinning wheel, but rather the black arrow that I can move about the blue screen, but nothing else.
Here's what I've tried with no success. 1. Re-booting via Safe Mode (Command-Shift). Instead of freezing on the blue screen, it asks for my password and after a few seconds it stops on the Snow Leopard Pink/Black Stars background. Same result, only the background is different 2. Resetting PRAM - No luck 3. Re-booting with the Snow Leopard DVD and using Disk Utility. I follow the necessary steps online. No luck
I have a 6 month old iMac (bought Dec 2011). It has 10.6.8 with all patches. It began to randomly shut down and got stuck in the reboot loop (sometimes, the problem was a reawakening after sleep, but even a simple shutdown/restart wouldnt guarantee correct behavior).
I did the Apple Hardware Test (it reported - no troubles found), reset the SMC, PRAM - all to no avail.
Finally, i reinstalled the OS from the DVD that came along with the iMac. Left it for a few hours to download the "jumbo" patch from apple site, and now it is back to behaving the same way - it is stuck in a reboot loop! I dont know if it installed the patch or not, as soon as i touched any key to wake up the iMac, it rebooted (like before). And now I gotta try the boot process like 15 times and it may boot correctly. Safe Mode boot is also not guaranteed to work. It shows the sliding bar and then back to reboot!
If it were a software issue, the reinstall of the OS should have fixed that? If it were a hardware issue, the AHT should have caught that? Am I stuck with a lemon? Just one of those bad pieces that are inevitable in any assembly line production?
I got a 1 TB Western Digital external last night and had left it on all night so that Time Machine could back me up a few times. Then this morning, I had disconnected the drive and decided that I ought to update to 10.5.8 because Software update had told me to the day before. So I did, and I walked out of the room after it started installing the update. Then I walked back in when I first heard the startup chime and the fans were running at 6000 rpm and the screen showed the Apple and the daisy wheel. It proceeded to turn itself off, and repeat the process, always getting stuck at the Apple logo screen. So I tried booting it up in safe mode, but nothing changed; it never got past the apple screen. Then I booted from the install disc and used disk utility to verify the disk and repair the disk permissions. I tried starting it up a couple of times after that and nothing had changed. So I booted from the install disc again and was going to reinstall Leopard, but I decided to restore from one of the pre-10.5.8 Time Machine Backups.
My sisters 1GB iPod Nano is stuck on the Apple Logo Screen and will not shut off or reset by holding the buttons down. It doesn't mount or open iTunes when plugged into a computer.
I have a new imac. I was stuffing the web, tried to upload a picture, the website locked up, so I hard booted my iMac. Then when it came back on, and I get is the start up sound, and a gray screen, nothing else. Its been 5mins now!
Using my Mac earlier today I lost all sound output, and attempted to reboot it to try and fix the problem. Now instead of booting it's stuck on the white loading screen. I've tried turning it off and on again from here, but I still get the same result.
1) Can I take my secondary drive in my Powermac G5 and install it into my forthcoming Mac Pro ? Or is the SATA interface different on the new machines.
2) Ordering extra memory from Crucial to save $, what's the situation with 'fans' and things on the memory. I'm confused, totally. Does the mac pro's require additional heat cooling on the memory, does the memory from crucial come with this, is it easy to install like the powermac or am I going to be left floundering like a fish out of water....
I was using my Mac (Macbook Pro 15" screen) and tried opening a file in GarageBand, at which point a warning message came up saying something about a midi file and something not being allowed, and then froze, resulting in me having to switch the computer off from the power button and restarting (Sadly I didnt realise that this would be the start of a whole host of problems and didnt make a note of the warning message). After rebooting I got the 'stuck on the blue screen with the Apple logo and infinitly spinning wheel' problem that i've seen in a few posts. having tried numerous suggestions posted with no change I ended up taking it to the genius section of an Apple store. When i got it back they said that it may have been a corrupted file, and that they re-installed and reset the starting programs (Something along those lines, I cant quite remember). I can now get onto the computer and use it, though some new problems have arisen.......
When I started up my MBP this morning I got a series of pop up windows that made me a little uneasy. Since then they have been unceasing and disappear before I can click deny. I have since shut down my computer and am resorting to using my boyfriend's PC... Any help would be appreciated. It looks like someone may have hacked my computer or something...
The issue I'm having is very weird taking into consideration that I just upgraded my hardware two months ago. I have an Intel X-25M SSD as my boot drive for OSX and a 1.5TB WD HDD with my Home Folder on it. Whenever, I launch an app it never launches immediately. I get a beachball that lasts about 5 seconds. When I try shutting down the computer I have to hit shutdown about 3-4 times before it does. Otherwise, it warns me with a message thats something like this: System cannot logout of user account because Safari is still in use. (but it's closed). Launching an app from an ssd should be instantaneous. So I don't understand if it is a hardware or software issue. I reset the PRAM ... helped for about a day but I'm back to the slowdowns. Any ideas. Also when I performed a software update for iTunes, the update installed but I got this warning so I have a feeling something is wrong.
I was browsing with safari reading email from my msn account when safari failed to load the page. I then decided to do a force quit. Usually, when I hit command option escape, it will show me the programs then show which program was not responding, this time, it did not say that Safari wasnt responding. After waiting for at least a couple of minutes, I decided to restart the Mac by pressing on the power button to shut down. When I powered up after a minute, the gray screen with the apple in the center appeared and the cursor was forever spinning. After waiting, I decided to shut down again and then tried to zap the PRAM. This did not work so I shut down again and tried to reset the SMC.
I recently set my Mac Mail preferences (using a me.com account) to send an "away message" to the senders of all incoming messages to my mail account. Little did I know the hassle this would create -- while I was away, there were problems with neverending back-and-forth away messages to various recipients where hundreds to thousands of e-mail messages were automatically exchanged back and forth from my account to the recipient that was also away or unable to receive messages. Then I really goofed up big time and sent myself an e-mail from the same away e-mail account, and I couldn't even stop it, there were so many messages upon messages it was just ridiculous. How can I avoid this problem in the future? Is there a simpler way to set an away message using Mac Mail and a me.com account?
Info: MacBook Pro 17" 2.66 GHz Intel Core 2 Duo, Mac OS X (10.5.6), 4 GB RAM 1067 MHz DDR3
New to mac with Macbook pro os x leopard - tried to send too many pics on email and it bounced back. now the my mac recovery area in mail continuously tries to recover it, slowing the system to a (pc like) crawl. How can I eliminate this recovery effort?
Every attempt to open Aperture results in a spinning beach ball. When attempting to force quit, every program freezes. I am running a MacBook Pro, OS X 10.9.3, 8 GB Ram. Have deleted and reinstalled the program from the App store with the same results. Purchased Aperture a few months ago and began without difficulties. However, recently, the program simply stopped working.
The 8800GT in my Mac Pro 1,1 just died. I'm back up with the 7300 for now.
Can I adapt the EVGA's GeForce GTX 285 Mac Edition for use? It comes with the cables, and I more than willing to pay the extra $$$ to save myself hunting around for parts.
I'm also a bit confused about the 4870 upgrade. Does the Apple version work out of the box on my 1,1? If so, maybe that's the way to go for now?
I'm trying to reboot Snow Leopard on a Mac Pro and reformat the HD. But of course, nothing can ever be easy and the darn thing will not boot from CD..It just boots from the HD and takes me to the login screen everytime,has anyone else had this problem?
Info: Mac Pro, Mac OS X (10.7.3), Snow Leopard Mac OS X 10.6
My Macbook is currently stuck booting up in windows 7. My shift key also appears to be stuck so holding the Option key when booting up to choose a start up disk isn't an option (it doesn't work). I do not currently have access to an external keyboard. I do have the startup disk. I'm wondering if I can use the startup disk to reset the systems startup disk? Are there other options?
I'm putting together a workstation that primarily is going to be used for Windows development and I wanted to have as fast a disk subsystem as possible.
It doesn't seem to be BootCamp drivers available for the card that Apple sells, so I found this card instead:
[URL] It has EFI firmware and is able to boot MacOSX from raid arrays. The only question is if it is able to boot stuff through Bios emulation.
Vista x64 is the primary target here, and SP1 actually has EFI booting support, so it might be possible to use this. However when I tried to install Vista x64 with SP1 integrated on the MacBook Air I wasn't even able to boot installer DVD because of EFI incompatibilities.
Anyone have any experiences with booting BootCamp on a MacPro with a raid card?
I am a student who is currently starting to work on some at home projects with cartoon animation (Toon Boom) and Video Editing (Final Cut/After Effects). I have a Dual 2.0 G5 with 1G Ram. Would there be a significant advantage in upgrading to a Dual 2.8 Mac Pro? I could probably get 700-800 dollars for the current computer so, would dropping 2000 on a new tower give me a huge boost in performance? (Money is kind of an issue but not if the difference is staggering.) Or should I just upgrade the RAM on my current tower, be happy with what I have and quit jabbering?
I have a MacPro with 6 Gb memory installed, by a Mac authorized facility. At times, only 4 Gb is shown as available memory. I hav to reset the SMU, which regains the lost memory. I have to do this every couple of weeks.
ok Im pondering buying a mac pro once they release the updates and I am wondering if I can take a 3.5" SATA drive out of my current desktop running XP and transplant it into the mac pro then use it with either VMware or bootcamp. So will this work or will I have to partition my hard drive and buy another copy of XP?
With Snow Leopard on the horizon, and there already being some 64bit operating systems out there which are a hassle to get working with the "woodcrest" MacPro machines, eg, W7 x64 is a no go, and I have read that it is a PITA to get Vista x64 going(and a waste of time anyway). It has gotten me thinking, will Snow Leopard work in true 64bit form in the machine that was advertised as a 64bit Pro workstation?I am eager too see how much of a difference Grand Central and Open CL make!
I'd like to change my system drive on my Mac Pro to the Intel X25-m 160 gig I just purchased.When I previously upgraded my laptop to SSD, I used carbon copy cloner to clone the internal drive onto the SSD.Unfortunately, I had a couple of authorization issues, one of which being for CS3. Somehow cloning the internal drive onto the SSD and replacing the internal drive with the SSD tripped up the authorizations.
On my Mac Pro I have a few more programs I'm worried about having to reauthorize if the same thing happens. All programs are legal installs, so I could reauthorize, but it is a headache. Especially since some of the companies only allow a certain number of installations and having changed laptops and desktops since purchasing the apps means that some of these programs will require the lengthy process of emailing and explaining the situation to the manufacturer.Given that I'm just trying to change the startup drive, how can I avoid these issues?
Would like to run WinXP pro on an SSD drive on a 8 core 3Ghz Mac pro.
Tried initially placing this drive on one of the two xtra SATA ports and mounting it where the extra CD drive goes, then discovered that Windows won't recognize and would need drivers/hacking etc.
Have decided to put it in regular bay 4 and use bootcamp. Do I need to install any special drivers to maximize the ability of Windows to access this drive?
Model Name:Mac Pro Model Identifier:MacPro2,1 Processor Name:Quad-Core Intel Xeon Processor Speed:3 GHz Number Of Processors:2 Total Number Of Cores:8 L2 Cache (per processor):8 MB Memory:8 GB Bus Speed:1.33 GHz Boot ROM Version:MP21.007F.B06 SMC Version (system):1.15f3
One of the hdd's in my macpro runs constantly. The computer is constantly reading and writing to the hd. Not sure which one. CHecked processes and it shows that it is in fact doing so, even with no open applications. Not sure where to look or how to fix it. SLowing down my computer as well.
