Disk Utility initially showed the drive as mounted when I ran the application. I don't know what's happened as I did not unmount the drive.
Verify Disk and Repair Disk quit because of errors.
How can I get the drive to remount?
I have a mac G5 dual 2 ghz powerpc with 1 gb ram running Leopard.
I recently bought a 1 tb Seagate Barracuda internal hard drive, which has been installed and running fine as my primary drive for the last month. My backup drive runs OS 10.3.9.
This morning my daughter was uploading some pictures to Snapfish when a message suddenly came across the screen saying, "You must restart your computer now." She restarted, and the computer only starts up on the old backup drive. Disk utility won't even show the new drive.
There's a CD in my mid-2009 13 inch Macbook that won't come out. It unmounts when I drag the icon to the trash/press the eject button, but won't come out. It just remounts and opens DVD player again.
Info:
MacBook, Mac OS X (10.7.2)
I have a second internal harddrive, which I only rarely use, but it mounts every time I boot. What do I need to do to stop it from auto mounting at boot?
One way is to edit /etc/fstab, but I'm not sure what exactly I have to do.
I have a Dual 1.8 G5. I've been experiencing shutdowns at start up but came to the conclusion that it was the primary hard drive failing somehow. So I installed 10.4 on a secondary hard drive and use that as my main and it works.
So this hard drive that failed is readable when I boot from CD and run disk utility. But if I boot in 10.4 the disk doesn't mount but it shows up in disk utility as unmounted. Also shows up in system profiler.
Is there a way I can get this drive to mount so I can make backups of stuff on there? Right now I'm transferring files using Terminal when I boot from CD - it would be easier if i can use a GUI interface to do this.
I am having problem to eject an external flash drive in my MacBook. After I eject the disk, the icon disappears normally, but re-appears instantly before I plug it out from the USB hub. So, every time I end up with an irritating warning sign.
Is there a way to stop remounting a disk once it is ejected from the system?
The flash drive I am having problem is actually not a generic flash drive but a mp3 player manufactured by Iriver - Iriver T5, which also work as a flash drive for me and a cross-plateform disk space for use in emergency.
I do not have this problem with other dedicated flash and external drivers.
Please share if you have any solution or thoughts toward the solutions.
I have filled the 4 bays of my MP with 30GB SSD's in RAID 0 and have a 1TB traditional HDD in the optical bay. In an effort to keep the machine as speedy as possible I was hoping to keep the traditional 1TB unmounted until it use is needed (wont be that often).
I am familiar with how to unmount/eject a drive once the computer is running, but is there a way for the machine to start up without it trying to access the drive thus slowing the boot time?
I have an older Mac G4 running OS X (10.4.11) and I have three internal hard drives, one of which will not mount. I can hear it spinning up and trying to mount, but it won't.Is it trashed? I've tried everything I know to get it to mount. Is there a way that I can at least recover some files that are on it?
View 1 Replies View RelatedAccidentally ejected 4 partitions of the terrabyte hard drive, and it's not on my disk utility list anymore, nor will it show at start up. I've unplugged, slid it out a little, snapped it back in, but still no sign of it.
Info:Mac OS X (10.4.11), Dual 1.8 G5, 2.5 GB DDR SDRAM
The only other volume on the disk does mount, and when starting from this second volumes, the primary volume does mount.. From other startup volumes on my second internal HD, the volume does mount. Disc utility repair, TechToolPro, and DiskWarrior all OK.No Menu Bar on Finder, can't access files from Finder icon in Dock. Safari won't open but Firefox OK. Tried zapping PRAM, repairing permissions.
Info:
Mac Pro, Mac OS X (10.4.11), Os 10.4.11, G5 PPC
i bought a ibook G4 off of a friend and knowning it needed some repairs it needed a new Harddrive. He had a 100Gig Seagate replaced in it before me and I tried a new 60Gig when I got it.either one of us couldnt boot either HD, we can not find the new Internal HD with the Mac. I can boot off a External HD holding down ALT. And i already tried clearing the P-ram many times.
Also when i go to load a 10.3 OSX disk it loads and either gives me a red circle X or like sorta artfacts and shifts the apple screen to the side of the page. Ive spent hours trying to fix this and have no luck. do i need a 10.4 or 10.5 disk? i did add 256MB ram to it so heres the specs. I have no clue what to do. ALSO! when i boot the external under the specs it wont show the HD under disk utilty or the about my pc info...
Ibook G4 1.25Ghz
512MB Ram
12In Screen
How I can go remount from Windows XP or 7 to Mac ?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.2)
I recently purchased a new SSD and would like to input that into my MBP 2012. If I have a partition on my external HDD that contains the carbon copy of my MBP, am I able to clone it into my SSD after I have installed it in the MBP through the USB?
Internal HDD --> External HDD
Place internal HDD into optibay, and place SSD into the harddisk slot
Connect External HDD via USB to MBP
CarbonCopy to new SSD via USB from External HDD
Format Internal HDD
Will this work?
I want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information:
Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives
Mac OS X (10.5)
how to mount a volume on a mac
Info:
PowerMac
I was surfing this site a couple of days ago when my MacBook suddenly froze up. I couldn't Force-Quit anything or do a soft restart, so I decided to just power-cycle restart (pressing the power button until it shut down, then pressing it again to start up). When I did so, my startup disk wouldn't mount.
I should give you a little background: Mine is a MacBook White early 2009, with upgraded 4GB RAM & 500GB 5400rpm Fujitsu HDD. I took the HDD from an off-the-shelf 2.5" external HDD. It has served me well for slightly over a year, and is only now giving me this problem.
I have since replaced the original HDD (which I was keeping as a emergency backup, phew) and put the problem HDD in an external FW enclosure.
I have run Disk Utility on it to try & rectify the problem. Disk First Aid says the disk is fine, but I just couldn't get it to mount. I thought I'd try to erase it and restore from my TM backup, but after I erased the disk, it still couldn't mount. What's worse, now the disk is apparently not writeable, and I can't even erase it. Disk First Aid is still telling me the disk is fine.
I've also tried booting from my SL install disk, but it won't mount the disk to install SL. It is still visible in Disk Utility, but greyed out.
Can anyone advise what I can do to recover the disk?
I can't really bring it in for a warranty exchange, cos I ripped this disk out of the original enclosure, so the enclosure is now completely busted, and obviously the warranty won't be honored. (Buying the external was cheaper than buying just the internal, and Fujitsu had a pretty OK reputation for their harddisks at that point. Could you blame me?)
So any software or hardware (or combination) solution would be great. Worst case scenario is to get a new HDD, but I'd still like to recover the use of this disk somehow.
Whenever I put in a commercial audio cd in, it mounts as "Audio CD". It s been a while since I've put an audio cd in, but I thought it gave the artist title. Also, iTunes is supposed to open...well instead of opening, it just bounces on my dock.
When iTunes IS open and an audio cd is put in, iTunes will freeze up with the spinning wheel of death. I cannot force quit iTunes until I have ejected the CD, and cannot eject the CD unless iTunes is closed.It a very weird problem. The warranty on my Mac has expired.
I have a new mbp and a WD 500gb external, the smaller size ones. When I hook it up directly to the usb port on my comp it mounts, but if I try to use the logitech 4 port usb hub the comp doesn't find the external.
View 3 Replies View RelatedI purchased a Seagate Momentus 2.5" Internal SATA 500 GB 7200 RPM hard drive. I put it into an external USB enclosure to clone my existing MacbookPro 160GB hard drive and then planned to swap them and install the new 500 GB HD. But when I plug in the external drive case, I do not see the Seagate drive mounted and cannot see it in Disk Utility either.
The external enclosure comes with a USB cable with two USB connectors to provide data transfer and power.
Any suggestions how I can mount this drive so I can clone the internal drive?
This morning, I had to print off some pictures from my digital camera for my art class, so I stuck my memory card (1 GB) into the slot, and it worked just fine. The other day, I plugged my LG Lotus into my MBP via USB and it also worked normally. Tonight, I tried to connect my phone once again, and it didn't mount. So, I tried the memory card in an adapter and it didn't mount either! My MBP isn't old at all (got it at the end of November '09)!
View 3 Replies View RelatedI have tried a Samsung Drive and an ASUS slim drive (that worked twice, then stopped working). They do show up in the Disk Utility, but not on the desktop. Disc Utility states that burning is not supported, even though I was able to burn two discs with the ASUS before it stopped as well. I had my keyboard replaced around the same time as the issue starting, it is possible that they could they have messed with something by accident. The tech did also forget to put a screw in above the DVD Drive. I also will note the internal drive is a Combo Drive, not a superdrive.
Info:
MacBook (13-inch Late 2006), Mac OS X (10.6.8)
Commercial DVDs Won't Mount on Macbook Pro. How to Fix?
Info:iMovie 09, Mac OS X (10.6.8)
How to Mount a hard drive to MAC BOOK PRO?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
I have a new Macbook Pro with a retina display that won't mount a Toshiba Canvio 3.0 Plus external 1TB drive. The drive shows up in the System Report under the USB tag. However Disk Utility does not see it. The drive shows up and is able to be erased and partitioned and mounted with another Macbook Pro running 10.6.8. So, the drive itself is good. how to get the drive to mount on the new Macbook Pro?
Info:
MacBook Pro (Retina, Mid 2012), Mac OS X (10.7.4)
inserted device (DVD, thumb . . .) do not show on desk top
IOS 10.7.5
Info:
MacBook Pro, Mac OS X (10.7.5)
Does anybody know how to get the MacBook Pro to recognize and mount data and program CDs when it is refusing to mount them? The CD player just ejects them before it even recognizes them.
View 9 Replies View RelatedI've got an external 500gb Seagate drive with 2 journalised partitions.....one for my time machine backups and the other for holding audio samples for my drum machines and such. All of a sudden today the audio partition won't mount but the time machine partition still works fine. I go into disk utility and it shows ther but just says unable to mount when I try to mount it. It suggests first aid so I verify and repair numerous times and it says everything is ok. I can boot up Ubuntu in VMware andboth partitions are visible and all the files are there....everything is just as it should be. I was using 10.5.7 and just upgraded to 10.5.8 tonight and nothing changed.
View 4 Replies View RelatedNot only did my MBP hard drive just stop working, but I needed to get the files off of my time machine backup on my other mac. My other mac was running very slow so I upgraded it to SL.
After I upgraded, I plugged my 1TB WD hard drive into it and it does not recognize the hard drive. It worked find before I did the upgrade.
So I borrowed my neighbors mac and plugged my time machine into her laptop running straight leapord and it also failed to mount.
It is almost like plugging it into the computer with SL unmounted the disk inside the casing. It happened to both of my time machine backup drives..
If I can not get these drives to work, I have lost 2 years worth of data that I backed up in two places.
My LaCie BigDisc HD won't mount on the desktop of my MacBook Pro. Is there some other place I can find and open the icons, or is there another procedure to follow to correct this problem?
View 1 Replies View RelatedI just took the hard drive out of my old ibook g4 and put it in a case to use an external.
But for some reason it won't show up? I looked in disk utility and its there but i cant mount it or repair it or anything. tried it on my wife's mack book same deal. i need the data on it.
