Software :: IBook G4 Unable To Mount New Internal HD - Bootup With External Hdd
Jan 10, 2009
i bought a ibook G4 off of a friend and knowning it needed some repairs it needed a new Harddrive. He had a 100Gig Seagate replaced in it before me and I tried a new 60Gig when I got it.either one of us couldnt boot either HD, we can not find the new Internal HD with the Mac. I can boot off a External HD holding down ALT. And i already tried clearing the P-ram many times.
Also when i go to load a 10.3 OSX disk it loads and either gives me a red circle X or like sorta artfacts and shifts the apple screen to the side of the page. Ive spent hours trying to fix this and have no luck. do i need a 10.4 or 10.5 disk? i did add 256MB ram to it so heres the specs. I have no clue what to do. ALSO! when i boot the external under the specs it wont show the HD under disk utilty or the about my pc info...
Ibook G4 1.25Ghz
512MB Ram
12In Screen
View 1 Replies
ADVERTISEMENT
Jan 4, 2009
I have an iBook G4 (1.42 ghz, 1gb - Leopard 10.5.6). I have a usb hub which has a few things plugged in (500 gb HD, mouse, ipod).
I bought a 320 gb portable hard drive. It is not recongized either through the hub or directly into either USB 2.0 ports.
I also have a G4 iMac 700 mhz. running Tiger. It does recognize the hard drive, as does my Intel iMac at work, and my friends Lenovo laptop.
View 1 Replies
View Related
Nov 11, 2008
My iBook G4 (see sig below) has an intermittent problem. It usually sits on my desk, plugged into the power adaptor, always on. The only time I ever do a shutdown is when I'm taking it with me to the airport. Here's where the problem happens -- WHEN it happens. I start it up and one of two things happens:
1. I get the old question mark disk icon, or
2. I get a plain grey screen
Sometimes, if I do a manual force reboot (cmd-ctrl-power) several times in a row, it will finally boot correctly. The lovely grey Apple logo shows up, and all is well.Other times, when that fails, I boot from a DiskWarrior CD. Sometimes it can't see the internal HD. Other times it sees it, and when I run DW, it does find errors to fix. Yet other times, DW sees it, and finds NO errors.
When the iBook is working, the internal HD's SMART status shows as Good.So, whatup with this? Is the drive actually going bad (SMART status notwithstanding), or is it maybe the controller or some other logic board component? I could chuck the iBook and get a nice new MacBook, but this 2004 antique still suits my needs.
P.S. BTW, the internal HD backs up to an external FW drive daily, so there will be minimum heartache if/when the thing totally bites it.
View 5 Replies
View Related
Oct 19, 2006
I feel incredibly dumb but can you buy something to put inside an ibook (or any laptop for that matter) to give you more space to save things? or do you have to buy an external drive? I can see lots of info about memory upgrading (which makes your computer more efficient yeah?) but nothing about this, is this because it's so obvious that I should know?
View 12 Replies
View Related
Aug 2, 2007
I have a dead/dying old G4 iBook (logic board failure) and was wondering whether I can remove the internal drive and mount it in an external case, and use it as an external USB or Firewire drive? The drive has some valuable data on it which I'd like to keep, and the iBook only boots for a few minutes each time (if I'm lucky).Is it just a matter of opening it up, taking the drive out, and taking it along to a computer shop who should be able to kit me out?
View 3 Replies
View Related
Jul 5, 2012
After using OS Lion, I used to use this HD as my time machine.Yesterday I wanted to backup, found out that my Mac pro can not mount this HD anymore. Other my older external HDs are working well, except this one.
I wonder why? My console shows fallowing error,p.s: already did SMC and PRAM, still doesn't work.
# Product name: Iomega Prestige 1TB portable hard drive. (USB)
# Driver: Iomega Encryption Utility Mac v3.1 (the one works with Lion)
# bought in 2012 April, still new.
Info:
MacBook
Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Mar 20, 2009
external harddrive (Seagate brand). I've bought DiskWarrior (the latest
version) and rebooted my mac to run the program. It recognized the
drive, but said it was not supported.
(i used to use it with my pc, but it did,once, run on the mac- until i yanked the cord out!)
Is there an issue with formatting that i need to get around so that my mac can read the drive to repair?
View 5 Replies
View Related
Jun 1, 2012
I disconnected a working external 750 Gig G-Drive. When I reconnected it, it won't mount. I have restarted the computer. I have disconnected & re-connected the drive. Still no luck. What should I do?
Info:
iMac, Mac OS X (10.7.4)
View 2 Replies
View Related
Jan 20, 2010
Without warning my iMac [OS X Snow Leopard] popped up an alert saying that I should eject a drive before disconnecting it. I had done nothing to generate this error message. I clicked ok to close it and noticed my 4 month old, external 8T Mercury Elite-AL Pro Qx2 was no longer visible in my drive directory. I also noticed this external unit was making a looped grinding noise as if it was trying to write without success. I figured one of the drives failed and took it to the mac doctor. Other than a few directory errors, everything appeared to be fine, so I paid the service fee, brought it home and plugged it in only to find the same prob - obviously it's something with my iMac. Before I go spending more service fees, I wondered if anyone here could point me toward a method of discovering what might be wrong. I ran disk utility [verify and permissions] and fixed some directory errors, but don't know how to look further. iMac was home networked with a PC [Windows] and a laptop [Windows]. I did notice something wacky with the PC, but its very old and I expect it to die any day. I was running the network through the PC, so I direct connected the iMac to the router and modem but no change: still cannot see the external drives. What other info do you need to make an educated guess for me?
View 1 Replies
View Related
Mar 25, 2010
I purchased a WD My Book Home edition. Followed instructions and correctly formatted for Mac.
Firstly *(and it now seems a fluke) on power up it switched on and appeared but ever since then, light does come on when I put the main power on but it wont show/mount on the desktop, unless I switch off the drive and back on again and even then it may not power up unless I unplug the power cable.
View 2 Replies
View Related
May 20, 2009
I'm having a series of problems. First some intermittent audio problems with Garageband, then, then some external drives won't mount, and now I can't sync to my disk from the iMac. I've run Disk Utitilies a few times and when I do Verify Disk Permissions, it finds a list of things to fix, I then hit Repair Disk Permissions and it fixes them, and then hit Verify Disk, and it say the disk appears ok. When I do Verify Disk Permissions again though, it finds another long list of things to fix. Is this serious? What should my next step be? Should I reinstall the entire system?
View 2 Replies
View Related
Jun 15, 2010
It's about 2 years old and been working fine. Now it won't mount on my Imac (tried it on 3 computers). It is not seen by disk utility or system profiler. I tried resetting PRAM. I am on OS 10.5.8.
View 1 Replies
View Related
May 21, 2012
Since upgrading to Mac OS X 10.7.4 I am unable to mount any of my G-Tech Raid hard drives.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Sep 1, 2007
how to use them i just got a two year old mac wit a stock 30gb hardrive, i took that out and put in a case, well apple took it out and put it in a case, now i tried attaching the external to my new 80gb in my ibook but its not mounting.
View 1 Replies
View Related
Jun 5, 2008
Just bought a used ibook G4 from ebay for my sister and was giving it the once-over. did a software update and installed 10.5.3 (no backup first!). It installed ok, but after restarting it just sits on a black screen and goes nowhere. It plays the on chimes and churns the DVD drive, but then nothing. BTW, the computer didn't come with any installation discs
View 1 Replies
View Related
May 2, 2010
I've got my iTunes Library on an external drive, but for some reason all of my Apps download onto my internal hard-drive, and if I move them onto the external drive they all corrupt.Any suggestions? The music/videos work perfectly.
View 2 Replies
View Related
Jul 1, 2008
Circa early January 2004 12" iBook, 800mhz running 10.4.?? (my daughter uses it - i think i upgraded it last month when i put iWork on it). She's been having issues with it turning on - can take awhile. But once it's on, it runs and runs (gee the battery is better than my MBP). She just went to turn it on, and there was this NOISE. Not a normal "problem chime" - i've heard those before, unless they don't chime like they did in the old days, it wasn't that. It then turned on, made the normal power up chime and she is now moving some files she wants to save to the Time Capsule Disk. It could have been another noise that got stretched out. She says sometimes if she plugs it in as it's booting it will freeze. Could she not tell me these things when they happen? I don't want to sink any money into it for repair - but dang, the budget needs to squeeze ME a new computer for recording school classes, not her a new laptop. So basically, could it just be a random noise? She said it's never done it before, here is hoping it doesn't do it again.
View 5 Replies
View Related
Mar 20, 2009
The difference is, that opposed to him, I am in fact using Garage Band to create a podcast. I am also using an external mic. And even though the external mic gets recognized by my ibook G4, it is for some reason not allowed to record. (Yes, my ibook recognizes it, however, the ibook won't pick up any minor sound with the external microphone. A person at a small recording studio here in my city made me realize this, as I thought the problem was other).
P.S. By the way, I had already tried two options and neither one worked out. For option number one, I used as preamp a product called iMic, in addition to the external microphone and the ibook G4. For option number two, I used the same products mentioned in option number one, plus an additional pre amp. The "success" was the same as before: recognition by the ibook G4, with the problem that one can not record into the ibook.
View 2 Replies
View Related
Jan 21, 2009
I have a mac G5 dual 2 ghz powerpc with 1 gb ram running Leopard.
I recently bought a 1 tb Seagate Barracuda internal hard drive, which has been installed and running fine as my primary drive for the last month. My backup drive runs OS 10.3.9.
This morning my daughter was uploading some pictures to Snapfish when a message suddenly came across the screen saying, "You must restart your computer now." She restarted, and the computer only starts up on the old backup drive. Disk utility won't even show the new drive.
View 1 Replies
View Related
Nov 18, 2010
I have a second internal harddrive, which I only rarely use, but it mounts every time I boot. What do I need to do to stop it from auto mounting at boot?
One way is to edit /etc/fstab, but I'm not sure what exactly I have to do.
View 2 Replies
View Related
Nov 23, 2010
I have a Dual 1.8 G5. I've been experiencing shutdowns at start up but came to the conclusion that it was the primary hard drive failing somehow. So I installed 10.4 on a secondary hard drive and use that as my main and it works.
So this hard drive that failed is readable when I boot from CD and run disk utility. But if I boot in 10.4 the disk doesn't mount but it shows up in disk utility as unmounted. Also shows up in system profiler.
Is there a way I can get this drive to mount so I can make backups of stuff on there? Right now I'm transferring files using Terminal when I boot from CD - it would be easier if i can use a GUI interface to do this.
View 1 Replies
View Related
Apr 12, 2009
Disk Utility initially showed the drive as mounted when I ran the application. I don't know what's happened as I did not unmount the drive.
Verify Disk and Repair Disk quit because of errors.
How can I get the drive to remount?
View 10 Replies
View Related
Mar 2, 2009
I have a G5 Imac and a G4 ibook. i want to use time machine, and have one external hard drive connect to both. I could get an external with more than one input (ie, usb and firewire)--does that work? Could i use a usb hub to connect the 2 computers to the HD, and set up different partitions?
And what of NAS? i do not want to set up a whole network (we already have one at my office, and i want this to be independent).
View 1 Replies
View Related
Sep 21, 2009
I have filled the 4 bays of my MP with 30GB SSD's in RAID 0 and have a 1TB traditional HDD in the optical bay. In an effort to keep the machine as speedy as possible I was hoping to keep the traditional 1TB unmounted until it use is needed (wont be that often).
I am familiar with how to unmount/eject a drive once the computer is running, but is there a way for the machine to start up without it trying to access the drive thus slowing the boot time?
View 2 Replies
View Related
Jun 30, 2008
I have an older Mac G4 running OS X (10.4.11) and I have three internal hard drives, one of which will not mount. I can hear it spinning up and trying to mount, but it won't.Is it trashed? I've tried everything I know to get it to mount. Is there a way that I can at least recover some files that are on it?
View 1 Replies
View Related
Jun 12, 2012
Accidentally ejected 4 partitions of the terrabyte hard drive, and it's not on my disk utility list anymore, nor will it show at start up. I've unplugged, slid it out a little, snapped it back in, but still no sign of it.
Info:Mac OS X (10.4.11), Dual 1.8 G5, 2.5 GB DDR SDRAM
View 6 Replies
View Related
May 9, 2012
The only other volume on the disk does mount, and when starting from this second volumes, the primary volume does mount.. From other startup volumes on my second internal HD, the volume does mount. Disc utility repair, TechToolPro, and DiskWarrior all OK.No Menu Bar on Finder, can't access files from Finder icon in Dock. Safari won't open but Firefox OK. Tried zapping PRAM, repairing permissions.
Info:
Mac Pro, Mac OS X (10.4.11), Os 10.4.11, G5 PPC
View 13 Replies
View Related
Jun 13, 2010
I recently bought a macbook pro and am making the transition from a pc to mac. It's all gone well so far, but I'm not sure what to do with my music. I currently have about 200 gb of music on my external hard drive (connected to my pc.) The internal hard drive on my pc does not have space to accomodate the files on my external.
I do not have the "Copy files to iTunes music folder" currently enabled because my internal doesn't have space. (And I like having the original music files in a separate location as I have over 30,000 songs). I don't know how to transfer my external and music to my macbook, since I will have to reformat the drive (which would erase everything on it, therefore I somehow have to make a backup either on my mac or on my pc. but what to do about the iTunes .xml file and iTunes folder on the internal pc drive??).
View 1 Replies
View Related
Feb 28, 2009
One of my macs is an older Power PC G4 867GHZ 1.5G Ram and it is running OS 9.2.2. I have software on it that has been rock solid for a while and thus I haven't upgraded that machine. The main boot up drive is starting to give me errors and crash and I cannot repair the issues with normal tools. I want to clone the internal startup drive to an external drive to use as the boot up. Is this possible with something like SuperDuper or is this even possible to do at all in 9.2.2?
View 2 Replies
View Related
Jan 2, 2010
I'm having trouble trying to reset my admin password on my Leopard machine. I am current on all software updates. I purchased the system (desktop iMAC) last year from Apple with Leopard already installed. When I changed my password last week I failed to write it down and now for the life of me I cannot remember what I changed it to. Ok so no big deal (yeah right!) I'll just start up from CD and reset it that way. Well, I started feeling this wave of resistance unfolding and sure enough I run into my first instance of conflict when I hear the CD constantly spinning up and down for 5 minutes while I'm holding down the "C" key. Upon release of the C key the disk just kept on spinning up and down so I had no choice but to power it down using the on/off button in back. Upon restarting the system would not boot up as long as the CD was still spinning so I restarted again holding down the eject key then the CD ejected. So next I started up the machine normally and after it came up I inserted the Installation disk again and waited for it to appear on the desktop which it did. So I went into the start up control panel in system preferences and selected the OSX installation disk in which to reboot from. Same thing.
Disk kept on spinning up and down doing nothing. So I restart it holding down the option key and select the OSX disk and does the same thing spins up and down. I already repaired permissions and zapped PRAM and even looked for error messages when I started up using verbose startup. nothing looked unusual. Ok so now I am at the point to where when I insert the installation disk it shows up on the desktop I double click on the icon and it opens up to its content window but I get the error message: "You can't open the application "Install Mac and Bundled Software" because its not supported on this architecture". I'm not having trouble opening any other CD or DVD on my system. Heres my question other than the obvious one of not being able to run the installation disk to reset my password. I removed every language except the English language from each application the other day because I read that it would improve processing time so I removed every foreign language in my applications folder. Do you think thats the reason I can't start up because maybe at when booting up from CD it looks for one of the foreign languages?..I don't really think this would have any affect on my problem. But I can't think of anything I changed including my password.
View 4 Replies
View Related
