Accidentally ejected 4 partitions of the terrabyte hard drive, and it's not on my disk utility list anymore, nor will it show at start up. I've unplugged, slid it out a little, snapped it back in, but still no sign of it.
Info:Mac OS X (10.4.11), Dual 1.8 G5, 2.5 GB DDR SDRAM
I have an older Mac G4 running OS X (10.4.11) and I have three internal hard drives, one of which will not mount. I can hear it spinning up and trying to mount, but it won't.Is it trashed? I've tried everything I know to get it to mount. Is there a way that I can at least recover some files that are on it?
View 1 Replies View Relatedhard drive makes a beeping noise and won't mount. Also has the word purged stamped on it
Info:
PowerMac, No OS on computer
I get unexpected problems with a dual 1.8 G5 (2 GB RAM, 2 disks inside, both 320 GB). In fact, the machine seems to break any hard drive I plug in it (via USB, eSata or internal HD). The internal hard drive hosting the system is clicking every five minutes or so, and two external hard drives are now mostly unsable (they unexpectedly unmount when copying, or they just don't mount at all). I checked them all with DiskWarrior. Some times, they can be repaired, sometimes not.
The problems appear with Tiger and Leopard as well. I lost Time Machine backups form an external hard drive (Seagate 320GB, got "keys out of order" error message in DiskUtility). The other external HD I have to put my photos (750 GB Seagate) can be used in both eSATA via Lacie PCI card and USB. Both USB and eSATA fail unexpectedly (unmount while copying) and everytime the hard drives seems to fail more and more everytime I try to use them.
I used Apple products since years '80 (SE30) and did not have problems whatsoever with previous machine and my actual macbook Pro. This G5 is getting me crazy, and I don't want to put hundreds of dollars repairing since it is worth less than 800$ actually... Is it the power supply, the logic board, a problem with electric voltage up and down? I always found solutions to problems but now, it is the first time I don't see the light... I feel like everytime I plug a hard drive in this G5, I play with fire and may loose my backups and archives!
The only other volume on the disk does mount, and when starting from this second volumes, the primary volume does mount.. From other startup volumes on my second internal HD, the volume does mount. Disc utility repair, TechToolPro, and DiskWarrior all OK.No Menu Bar on Finder, can't access files from Finder icon in Dock. Safari won't open but Firefox OK. Tried zapping PRAM, repairing permissions.
Info:
Mac Pro, Mac OS X (10.4.11), Os 10.4.11, G5 PPC
I'm looking to install a second internal hard drive on my Powermac G5. Is this Seagate Barracuda 7200.11 compatible?
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148274
Information:
Powermac G5 Dual Core 2.0
Mac OS X (10.4.9)
Dual 19" LCD, 3 GB RAM, Bose Companion 3
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
Info:
iPod shuffle, Mac OS X (10.7.3)
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I want to keep my applications etc on one internal HD and use my second internal HD as a back up.I am a graphic designer, and i have been backing up to an external LACIE Porche 160 Gig firewire HD. This has worked fine, but...My second internal HD (112 gig?) is still loaded with 10.3 and has adobe CS2 on it along with some other crap that I no longer need.I have loaded Adobe CS3 on my primary drive and have all the files I need on that one...What is the best way to set up my second HD as a "slave" drive to improve the performance of my G5 dual 2 Ghz??Will there be any issues now that I loaded Leopard on the primary HD?
Information:
Power PC G5 Tower 2 Ghz dual processor (2004?) with two internal hard drives
Mac OS X (10.5)
I just purchased a new iMac, System 10.7.4. When I tried plugging in my old WD external with a newly purchased Firewire cable (couldn't attach with the cable that came with the drive originally), the drive didn't show up on my desktop. I tried shutting down and restarting, thinking that would help, but it did not. I then removed it and placed it back on my G5 Tower and it works fine. I am running system 10.5.8 on my old mac, just as an FYI. I need this drive as my time machine backup is on it.
Info:
iMac, Mac OS X (10.7.4), WD External Drive
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI have a WD Terabyte drive that I have used for over a year with no problems. A couple of days ago my roommate went to use it and disconnected the drive from my computer without ejecting it first. He used it with his PC and disconnected it without "safely removing" it from his computer and now it will not mount to my desktop of been seen by PC. Disk Utility sees the device but I get an error when I try to repair the disk or verify the disk. It gives me an "error on exit" message. I really need the 700GB of info on that drive. Don't know what to do next.
Information:
Powerbook G4
Mac OS X (10.4.11)
I recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX). I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Info:
Mac Pro, Mac OS X (10.5.8)
I have an external hard drive (NTFS) hooked up via firewire to a firewire audio interface, hooked up to my Macbook Pro with OS X 10.6.4. I accidentally turned off my firewire interface before ejecting the hard drive. (I have done this before, it's hard to remember I have my hard drive on sometimes, and nothing bad has happened). When I turned the hard drive back on, the mac says "the disk you inserted was not readable by this computer." I can pick "Initialize..." "Ignore" or "Eject"
If I click Initialize, I can't repair the disk or anything because it is NTFS.I tried booting into Windows 7, and it does not recognize the drive either.
How to Mount a hard drive to MAC BOOK PRO?
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.7.3)
I'm using an older G5 single processor. I've reached the Max with a 300 Gig Seagate 2nd internal drive. I've run out of FCP srcatch disk space. I have about 75 Gigs left. I researched a Seagate HD Model ST3750640AS - Interface SATA - it's 750 Gigs. I just wanna make sure that the ones sold by New Egg etc., are compatible. Here's New Egg's; [URL].
I also wanna make sure that I've choosen the correct path to back up the 250 Gigs of data; First I need to copy all of the scratch disk files into another Hard Drive. Perhaps one of my external Lacie's. I'm familiar with how to Erase the New Drive, and format the New drive using MAC OS extended Journaled. Next (in turn), I'll need to copy all that data (little bits at a time), back to the New Seagate internal drive.
Information:
Power Mac G5 Desktop (Single Processor 1.8) - G4 800 MHZ Quicksilver - OS9&X
Mac OS X (10.4.6)
G5: 4 Gigs RAM - ATI 9800 Pro AGP - #2 Internal HDs #3 Lacie Ext. HDs
I'm leaning towards picking up a 1TB Barracuda 7200.11 to throw in my empty slot. I'm not a huge fan of Seagate these days, but this seems like the best choice of drive at this size. I've got a Dual 2.3 G5 with 6.5 gigs of memory.
I'm doing a lot of video editing with Final Cut Pro and want to setup this drive to store my editing environment. So it's only being used as a storage device. All the initialization specs I see are to configure the drive as the bootable drive. Can anyone point me to some specs to set this up as a storage drive?
Information:
Dual Core 2.3Ghz PowerMac G5, Macbook Pro Core2 Duo
Mac OS X (10.5.1)
Just bought the WD Elements external Hard drive, plugged it in... and it won't mount on my G4!
-Checked all USB ports
-Doesn't show up in Disk Utility or System Profiler
Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.
View 2 Replies View RelatedI am new to this forum and hoping for some advice with this hard drive issue.
I opened a brand new Lacie 500 GB Hard Drive. It is connected to my macbook via usb. I selected it as my hard drive destination in Time Machine and ran the backup option.
The hard drive did mount. About 5 minutes in the backup option failed - a time machine error: time machine backup failed.
I ejected the drive and unplugged it/turned it off and rebooted my laptop. Now the hard drive does not mount on my desktop however will show in disk utility. It lists with the Lacie name and another subdivision under the name.
When I try disk repair, erase or partition..I always get the same message: resource busy. After the error, the hard drive subdivision disappears leaving only one name on the list in disk utility. (It does not have the name underneath it).
I apologize for my semi technical description. I am new to mac and appreciate any advice on how to fix this issue. All I want to do is backup my laptop using the new hard drive with time machine.
Hello everyone. I've been using an external Western Digital My Studio (500GB) drive for the last year or so with a Core2Duo Macbook Pro, and have had no problems until this morning. The drive is used primarily for Time Machine backups, but I also have some photographs stored as well.
This morning, just after I'd begun copying some of these files to another external drive, the WD drive went down, and now will not mount/showup in Finder. It DOES show up in Disk Utility, though with the Time Machine volume grayed out. I get a "could not mount" error when I click on the "mount" icon, and nothing else I try (rebooting, unplugging drive power supply, etc). has worked. I'm trying to avoid the erase-and-reformat option, because I'd lose some potentially valuable images.
My LaCie BigDisc HD won't mount on the desktop of my MacBook Pro. Is there some other place I can find and open the icons, or is there another procedure to follow to correct this problem?
View 1 Replies View RelatedI have a Lacie 1TB external hard drive that keeps disconnecting from my Time machine to back up data.how to remount, I can not find it anywhere .....
Info:
Macbook, Mac OS X (10.5.1)
Recently my WD Passport is recognized by Disc Utility but will not mount.I have tried repairing disk. What can I do?
Info:
MacBook Pro, Mac OS X (10.7.4)
Without warning my iMac [OS X Snow Leopard] popped up an alert saying that I should eject a drive before disconnecting it. I had done nothing to generate this error message. I clicked ok to close it and noticed my 4 month old, external 8T Mercury Elite-AL Pro Qx2 was no longer visible in my drive directory. I also noticed this external unit was making a looped grinding noise as if it was trying to write without success. I figured one of the drives failed and took it to the mac doctor. Other than a few directory errors, everything appeared to be fine, so I paid the service fee, brought it home and plugged it in only to find the same prob - obviously it's something with my iMac. Before I go spending more service fees, I wondered if anyone here could point me toward a method of discovering what might be wrong. I ran disk utility [verify and permissions] and fixed some directory errors, but don't know how to look further. iMac was home networked with a PC [Windows] and a laptop [Windows]. I did notice something wacky with the PC, but its very old and I expect it to die any day. I was running the network through the PC, so I direct connected the iMac to the router and modem but no change: still cannot see the external drives. What other info do you need to make an educated guess for me?
View 1 Replies View RelatedI have a LaCie 320 GB external hdd (USB 2.0) that worked perfectly until last night. Now it won't mount when I connect it to my computer, nor can I see it in Disk Utility. Disk Warrior can't see it either. I tried connecting it to my roommate's MBP with no luck.
It spins up just fine and doesn't make any clicking noises or anything like that, so I feel like there might just be some hope yet; I'm thinking it might just be a faulty USB cable or something, but I don't have a spare one to try it with.
Alright, so My ipod is formatted for windows when formatted in this you can only copy chunks of 4 gig things using it as an external. but if you change the formatt of it to take all sizes, then it's not compatible with mac and pc. =/ i had it originally formatted for pc because i just recently got a mac book pro and it's my primary computer. well on to the hard drive trouble that is related i'm borrowing my friends external to get a 8 gig file from my pc to my mac. it's formatted in fat32(windows and mac read) but that format only allows for a 4 gig max to be put on it at one time. so i guess i'm outta luck there, i've looked at JR split but who knows it that will work. My main q is, i'm going to be getting my own personal external soon and i want to know whats the best way to format it that it will mount on my pc and my mac and allow me to copy more that 4 gigs of stuff on it at a time.
View 1 Replies View RelatedAfter a lifetime of owning PC's I finally purchased a MacBook Pro running OS X. I installed Parallels Desktop 5, Windows XP, and several Windows apps to have dual functionality. Now I need to write to my NTFS ext. hard drive where I backup everything. It has 800gb of space left, so it would be a shame to get a new one just b/c I have a Mac now. I first installed MacFuse and then NTFS-3G. Now when I reboot, the ext. HD won't mount at all. What have I done wrong?
View 6 Replies View RelatedRunning Lion. Trying to recover files from two identical, old hard drive. Both are IBM Deskstars that used to run Windows. Using a Startech USB to IDE adapter. I was able to get 1 HD to mount, but it was not the one with the files that I need. The 2nd hard drive will not mount, nor does it show up in Disk Utility. I've downloaded Data Rescue 3, Disk Drill, Stellar Phoenix and Photo Rescue. But, still no luck. I've tried to mount it using Terminal, but no luck. Please help... I'm pulling out my hair and will be bald soon.
Info:
iMac, Mac OS X (10.7.3)
I just installed a new internal hard drive into my macbook as my old one was failing. Before doing this I backed up all of my information through Time Machine onto a Seagate FreeAgent external hard drive. I've been using this external hard drive for the past two years and I've never had any problems with my macbook mounting it. Once I had all of my personal information backed up I took out the external hard drive and then proceeded to take out my old internal hard drive and installed the new one. I installed the Mac operating system and the Macbook started up just fine but when it came time to reload all of my personal setting using Time Machine my macbook didn't recognize that there was an external drive plugged in. I know it isn't the external drive as it mounts just fine on other laptops. how I can get my macbook to mount the drive so that I can transfer all of my information onto this new internal drive?
Info:
MacBook, Mac OS X (10.5.8), Seagate FreeAgent
