OS X :: Leopard Kernel Panic On Installation
Dec 25, 2008
I have a 2 GHz Intel Core Duo MacBook with 1GB of SDRAM. I have OS X Tiger v. 10.4.6, and I just recieved Leopard v. 10.5.4, and I am attempting to install it. If it makes any difference, I have my harddrive partitioned - 40GB for OS X, and 30GB for Ubuntu Linux (8.10 Intrepid Ibex), and rEFIt to switch between the two. I booted into Tiger and popped in the Leopard installation DVD. A window popped open with an icon to install Leopard. I double clicked on this, and it told me to restart. So, I pressed the restart button in the window, and the computer restarted, automatically booting into the OSX DVD.
The Apple logo popped up, with the little spinning wheel. It churned for a few minutes, then it had a kernel panic: So, I did as the notification told me, and restarted. It automatically booted into the DVD again, and the same thing happened. Next time, as a booted up, I held the eject key down, and I was able to get the DVD out. So, I'm back to where I started, but I don't have Leopard installed. There are several minor scratches on the DVD, but nothing I would expect to mess with the DVD. Another thing: I popped in the Leopard DVD, and opened the Disk Utility after this fiasco, and verified the DVD. I got this error output:
Code:
Verifying volume "disk1s3"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid node structure
The volume Mac OS X Install DVD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, the "Repair Disk" button is greyed out. I don't want to go through the Apple Support Hotline.
View 7 Replies
ADVERTISEMENT
Mar 15, 2008
I just got a refurbished iMac G5 from the university. When I got home I installed all of my applications. I then update them. Like usual, I have to restart the computer when they are done installing to complete the process, so I do. However, when I boot up the computer again I get a Kernal Panic. ("You need to restart your computer. Hold down the power button for several seconds or press the Restart button.")
View 4 Replies
View Related
Nov 4, 2010
After installing 4GB of RAM on my unibody macbook pro, I get a kernel panic error. Am I right that the problem is about CPU? Is that mean that it is dying or broken?
Here what is said:
Interval Since Last Panic Report: 141459 sec
Panics Since Last Report: 2
Anonymous UUID: F96DF9E1-E94C-4FC7-B934-5DFD765093C4
Thu Nov 4 20:34:54 2010
panic(cpu 1 caller 0x9ca5d7): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x59938000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x58d5b938 : 0x21b455 (0x5cf328 0x58d5b96c 0x2238b1 0x0)
0x58d5b988 : 0x9ca5d7 (0xbd6f0c 0xc45f80 0xbe4468 0x0)
0x58d5ba28 : 0xadd179 (0x95b5404 0x95b3004 0x100 0x2)
0x58d5ba78 : 0xad4cae (0x95b3004 0x100 0x58d5bb08 0x2)
0x58d5baa8 : 0x17c181e (0x95b3004 0x100 0x4bcd2cee 0x13b0103)
0x58d5bbe8 : 0xafaf45 (0x95b3004 0x95b1004 0x0 0x0)
0x58d5bc28 : 0x9d3836 (0x95b3004 0x95b1004 0x0 0x0)
0x58d5bc68 : 0x9cfaf5 (0x0 0x9 0x0 0x0)
0x58d5bdc8 : 0x9d1a5d (0x0 0x600d600d 0x702a 0x58d5bdf8)
0x58d5be98 : 0x9685f4 (0xc1d0002e 0xaa910001 0x20802040 0x58d5bee0)
0x58d5bef8 : 0xd132e9 (0x8f4e400 0x58d5bf4c 0x0 0x7)
0x58d5bf58 : 0xd13486 (0x8f43800 0xd19ab4 0x58d5bf78 0x2a1591)
0x58d5bf78 : 0x22fb84 (0x8f43800 0x0 0x0 0x73847d61)
0x58d5bfc8 : 0x29e6cc (0x863ea0 0x0 0x10 0x9a5f0a0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.12)@0xd10000->0xd19fff
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x937000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x959000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x926000
com.apple.nvidia.nv50hal(6.1.8)@0x1693000->0x1ab4fff
dependency: com.apple.NVDAResman(6.1.8)@0x966000
com.apple.NVDAResman(6.1.8)@0x966000->0xc47fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x926000
dependency: com.apple.iokit.IONDRVSupport(2.1)@0x959000
dependency: com.apple.iokit.IOGraphicsFamily(2.1)@0x937000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10F569
Kernel version:
Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 13213256682202
unloaded kexts:
com.apple.driver.AirPortBrcm43224425.16.2 (addr 0xd54000, size 0x1523712) - last unloaded 105226877102
loaded kexts:
com.apple.driver.AppleHWSensor1.9.3d0 - last loaded 24131381015
com.apple.filesystems.ntfs3.2
com.apple.driver.AGPM100.12.12
com.apple.driver.AppleHDA1.8.7f1
com.apple.driver.AppleMikeyHIDDriver1.2.0
com.apple.driver.SMCMotionSensor3.0.0d4
com.apple.driver.AppleMikeyDriver1.8.7f1
com.apple.filesystems.autofs2.1.0
com.apple.driver.AudioAUUC1.4
com.apple.kext.AppleSMCLMU1.5.0d3
com.apple.Dont_Steal_Mac_OS_X7.0.0
com.apple.driver.AudioIPCDriver1.1.2
com.apple.driver.AppleIntelPenrynProfile17
com.apple.driver.ACPI_SMC_PlatformPlugin4.1.2b1
com.apple.driver.AppleLPC1.4.12
com.apple.driver.AppleGraphicsControl2.8.63
com.apple.driver.AppleUpstreamUserClient3.3.2
com.apple.GeForce6.1.8
com.apple.driver.AppleUSBTCButtons1.8.1b1
com.apple.driver.AppleUSBTCKeyboard1.8.1b1
com.apple.driver.AppleIRController303.8
com.apple.iokit.SCSITaskUserClient2.6.5
com.apple.iokit.IOAHCIBlockStorage1.6.2
com.apple.BootCache31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib1.0.0d1
com.apple.driver.AppleSmartBatteryManager160.0.0
com.apple.driver.AppleFWOHCI4.7.1
com.apple.driver.AirPortBrcm43xx423.91.27
com.apple.driver.AppleUSBHub4.0.0
com.apple.driver.AppleAHCIPort2.1.2
com.apple.nvenet2.0.15
com.apple.driver.AppleUSBEHCI4.0.2
com.apple.driver.AppleUSBOHCI3.9.6
com.apple.driver.AppleEFINVRAM1.3.0
com.apple.driver.AppleRTC1.3.1
com.apple.driver.AppleHPET1.5
com.apple.driver.AppleACPIButtons1.3.2
com.apple.driver.AppleSMBIOS1.6
com.apple.driver.AppleACPIEC1.3.2
com.apple.driver.AppleAPIC1.4
com.apple.driver.AppleIntelCPUPowerManagementClient105.10.0
com.apple.security.sandbox0
com.apple.security.quarantine0
com.apple.nke.applicationfirewall2.1.11
com.apple.driver.AppleIntelCPUPowerManagement105.10.0
com.apple.driver.DspFuncLib1.8.7f1
com.apple.driver.AppleProfileReadCounterAction17
com.apple.driver.AppleProfileTimestampAction10
com.apple.driver.AppleProfileThreadInfoAction14
com.apple.driver.AppleProfileRegisterStateAction10
com.apple.driver.AppleProfileKEventAction10
com.apple.driver.AppleProfileCallstackAction20
com.apple.iokit.IOFireWireIP2.0.3
com.apple.iokit.IOSurface74.0
com.apple.iokit.IOBluetoothSerialManager2.3.7f1
com.apple.iokit.IOSerialFamily10.0.3
com.apple.iokit.IOAudioFamily1.7.6fc2
com.apple.kext.OSvKernDSPLib1.3
com.apple.driver.AppleHDAController1.8.7f1
com.apple.iokit.IOHDAFamily1.8.7f1
com.apple.driver.AppleSMBusController1.0.8d0
com.apple.iokit.AppleProfileFamily41
com.apple.driver.AppleSMC3.0.1d2
com.apple.driver.IOPlatformPluginFamily4.1.2b1
com.apple.driver.AppleSMBusPCI1.0.8d0
com.apple.nvidia.nv50hal6.1.8
com.apple.NVDAResman6.1.8
com.apple.iokit.IONDRVSupport2.1
com.apple.iokit.IOGraphicsFamily2.1
com.apple.driver.BroadcomUSBBluetoothHCIController2.3.7f1
com.apple.driver.AppleUSBBluetoothHCIController2.3.7f1
com.apple.iokit.IOBluetoothFamily2.3.7f1
com.apple.driver.AppleUSBMultitouch205.32
com.apple.iokit.IOUSBHIDDriver4.0.2
com.apple.driver.AppleUSBMergeNub4.0.0
com.apple.driver.AppleUSBComposite3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice2.6.5
com.apple.iokit.IOBDStorageFamily1.6
com.apple.iokit.IODVDStorageFamily1.6
com.apple.iokit.IOCDStorageFamily1.6
com.apple.driver.XsanFilter402.1
com.apple.iokit.IOAHCISerialATAPI1.2.4
com.apple.iokit.IOSCSIArchitectureModelFamily2.6.5
com.apple.iokit.IOFireWireFamily4.2.6
com.apple.iokit.IO80211Family311.1
com.apple.iokit.IOUSBUserClient4.0.0
com.apple.iokit.IOAHCIFamily2.0.4
com.apple.iokit.IONetworkingFamily1.9
com.apple.driver.NVSMU2.2.7
com.apple.iokit.IOUSBFamily4.0.2
com.apple.driver.AppleEFIRuntime1.3.0
com.apple.iokit.IOHIDFamily1.6.5
com.apple.iokit.IOSMBusFamily1.1
com.apple.kext.AppleMatch1.0.0d1
com.apple.security.TMSafetyNet6
com.apple.driver.DiskImages283
com.apple.iokit.IOStorageFamily1.6.1
com.apple.driver.AppleACPIPlatform1.3.2
com.apple.iokit.IOPCIFamily2.6
com.apple.iokit.IOACPIFamily1.3.0
Model: MacBookPro5,1, BootROM MBP51.007E.B05, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.7f1, 2 service, 12 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543225L9SA02, 232,89 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: USB Optical Mouse, 0x046d (Logitech Inc.), 0xc046, 0x06200000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000
View 5 Replies
View Related
Apr 3, 2009
I called applecare today, they weren't any help they told me to reinstall OS X, so I am downloading the updates I need and it tells me to restart my computer, during the installation process the god dam computer freezes, I wait and wait, finally I decide to shut it off, now it keeps going to some kernel panic mode, wtf should I do, I demand a replacement, I've had problems since I got this computer, two logic board replacements, now this?
View 11 Replies
View Related
Jul 11, 2009
I'm in possession of a mac pro 2x 2.8ghz intel quad core running leopard. I have a main hardrive and a secondary harddrive. I was attempting to reformat the first hd and reinstall leopard. I pop in the cd as I have with many other systems, click the install startup and reboot, after about 4 minutes of waiting I see the black screen drop and it asks me to restart my comp, presumably a kernel panic error. I've done this with two different hd's to rule out it being an hd problem. I've also procured a friend's copy of leopard and the same problem occurs. The system was acquired from a local business that closed recently and sold off it's stuff which is how I came into possession of the system. It has no 3d party hardware that I can see. I find myself wondering if it is a problem with the motherboard and since the system used to be for business purposes perhaps there is some sort of block or lockout on the mobo that's preventing an installation.
View 7 Replies
View Related
Nov 10, 2008
Since yesterday I have not been able to boot normally into Leopard. I had just switched of my ADSL modem and the computer froze after that it never boots in normal mode. I am in safe mode, the audio does not work in safe mode, everything is working. I am attaching the crash report in text format. I did try to boot after removing all the peripherals, also tried to reinstall but the computer does not accept the install disk , just ejects them. I am in real trouble now, suggestions are welcome. I am using a PowerPC machine specs PowerMac G5 1.6ghz with 1.25 GB RAM running OS X 10.5.5
View 5 Replies
View Related
Oct 15, 2009
Bought a new Macbook Pro 2.8 a few days ago (newest one with longer battery), it shipped with Snow Leopard. However, I believe the Hardware is still the same as before Snow Leopard was released, so it should work with Leopard 10.5.
If I try to use a Leopard disc it just doesn't boot, or it comes up with a kernel panic. I even installed Leopard on my 2.5" in my Mac Pro first, then tried booting it on the macbook pro. Same thing, kernel panic. Have they added some kind of lock to the hardware that stops Leopard from being loaded? I thought they would only do that when new hardware is released.
View 8 Replies
View Related
Sep 4, 2009
I am pretty new to the forums but I installed snow leopard on an 2008 iMac 2.4 ghz, 3gb of ram and 250gb hard drive on September 1, 2009 and had no problems shutting down.
Then on Wednesday when I shut down it goes into a kernel panic and tells me to restart. When I go into the other user account it does not do that. I have a picture of the error log that i got when I started the computer up to submit to Apple. Can someone please help.
I have reset PRam, repaired permissions, and reinstalled Snow Leopard but recovered it from a Time Machine Backup. I do not know what to do.
View 4 Replies
View Related
Dec 13, 2009
First the bad news - consistent kernel panics
Good news - found a remedy in disabling my screen saver.
I'd like to use my screen saver without getting kernel panics. I've tried erasing my drive and restoring from a back up. resetting PRAM, repaired permissions and ran Tech Tool Pro 5 (file structures and repaired permissions, everything else checked out fine).
View 4 Replies
View Related
Jul 23, 2008
I have a Macbook with 10.5.4 and got a kernel panic suddenly. My Macbook was off. Yesterday evening I shut it down and everything was well with it, no problems at all. This morning I turned it on, and after the normal grey screen at the startup, I got a kernal panic before Leopard even started. I am familiar with kernel panics but not when they occur before the system started. I turned my Macbook off and on again while holding the Alt, Apple, P and R keys and waited for the chime, 3 times. After that, my Macbook started normally, no kernel panics, it just started the system and I was ready to go. However, I am really scared now. Does a kernel panic at startup indicate harddisk problems? Was it just a coincidence? I am afraid to turn my computer off, it might get a kernel panic again. I checked permissions and all seemed well, but I am hoping someone can tell me more about kernel panics at startup.
View 3 Replies
View Related
Oct 20, 2009
I am trying to install leopard on a g4 450 dual processor with a gig of kingston ram. I received this computer with the Question mark folder, witch appears after startup. I get the boot menu select the external hard drive from witch the leopard dvd is on. I have inspected and tested this and it works on other macs. After o select it about 15-20 seconds go by then the lovely kernel panic happens.
View 1 Replies
View Related
Jun 12, 2012
After installing update I am getting a panic debugging in start up
Info:
MacBook Pro, Mac OS X (10.4)
View 1 Replies
View Related
Aug 11, 2008
I have a PowerBook G4, 1.33 GHz, 512MB ram and I am having trouble installing leopard. I have backed up the hard drive and erased it for a clean install. Every time I go to install if freezes at "calculating estimated time remaining" and gives a kernel panic error. I am unable to check the panic log as the hard drive was erased. I have already repaired disk, reset pram etc.
View 2 Replies
View Related
Aug 29, 2009
I've upgraded my MBP to Snow Leopard today from Leopard and I'm getting a Kernel Panic when I login as one user. Logging in as an Admin user or a new user account is fine, and I still get the Kernel Panic if I boot up in to Safe Mode. It's obviously a problem with the user account and looking at the dump log it seems to be caused trying to mount something, but I can't for the life of me track it down.
[Code]
View 8 Replies
View Related
Aug 30, 2009
Installed Snow Leopard (retail box) onto a last-gen Aluminum MacBook Pro (2.6Ghz model). Did a time machine backup. Put in CD and upgraded. Rebooted with no peripherals plugged in and I get a kernel panic. There's only one user on this machine so I can't see if it's an account problem. I did the same thing on both my Macbook Air and 17" MacBook Pro.
Question: Do I have to now Reinstall Leopard (fresh)
Then update Snow Leopard
Then restore from Backup?
OR
Install Leopard
Recover from time machine backup
Then install Snow Leopard
I don't have all day and really don't want to screw up the process. Is there any thing else that might say why this kernel panic is happening?
View 3 Replies
View Related
May 29, 2012
Over the weekend I tried to backup my MacBook Pro onto an external harddrive, and when about 23Gb out of 110Gb were completed, my mac went into a kernel panic ("You need to restart your computer. hold down the power button until it turns off, then press the power button again." in four languages). Previous backups went fine. So I did a reformat of the ext. hdd, same thing: after about 20 or so Gb of backup, the msg. pops. otherwise the mac runs without problems. Did a virus check, which came up negative.
Here is the panic log:
Interval Since Last Panic Report: -6 sec
Panics Since Last Report: 1
Anonymous UUID: 7254B2B2-A9E2-40B3-9A00-06A141425C7F
Mon May 28 06:53:53 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00270ea8, type 14=page fault, registers: .....
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
May 29, 2012
How to do a safe reboot on my MacBook Pro when kernel panic message appears?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 10, 2012
I had a kernel panic few days ago, and there's no audio on youtube, itunes after the attack......
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 13 Replies
View Related
Feb 2, 2009
My macbook recently had a kernel panic while running Leopard i got from the previous owner. (restart screen at turn on, would keep showing it.) I re-seated the ram, tried with one out and one in, vice versa, reset the PRam, the NVRAm the EVERYTHINGram, still no go.
I reinstalled the os using the install disks that came with my macbook, but of course it had to come with tiger, so now im back in circa 2006.I also have a macbook pro. Would i be able to use the macbook pro's CD on my macbook to give me Leopard?
View 2 Replies
View Related
Aug 30, 2009
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies
View Related
Jun 29, 2012
I am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
View 1 Replies
View Related
Nov 7, 2010
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies
View Related
Nov 26, 2010
For the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
View 3 Replies
View Related
Jul 7, 2007
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies
View Related
Aug 8, 2008
I get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies
View Related
Mar 18, 2009
I recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
View 2 Replies
View Related
Apr 11, 2009
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)
View 9 Replies
View Related
May 3, 2009
Happy for my macbook pro for almost two years. Lately it's been unstable and freezes sometimes. Two days ago it went to kernal panic and shows kernal panic screen and asks for restart everytime it restarts. It won't start on DVD or safe mode (it just hangs there and keeps spinning). For single user mode, it first worked and I was able to remove login items, but it froze again and now generates the following panic log. All the hardware have been the same and I have installed vpn a few months ago and dropbox last week.
Jettinsoning kernel linker.
Resetting IOCatalogue.
GFX0: family specific matching fails
Matching service count =1
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
Matching service count =2
May 3 11:51:15 localhost DirectoryService[20]: Launched version 5.6 (v514.24)
Previous shutdown Cause: 3
ath_attach: devid 0x24
yukon: Eithernet address xxxxxxx
Override HT40 Powers. EEPROM Version is 14.4. Device Type 5
NVDANV50HAL loaded and registered.
GFX0: family specific matching fails
GFX0: family specific matching fails
GFX0: family specific matching fails
Matching service count = 0
May 3 11:51:24 localhost configd[28]: Error: No interface name for AirPort_Athr5424ab
May 3 11:51:24 localhost configd[28]: Error: ioPublishedDriverCallback() failed to initDeviceFromService()
May 3 11:51:24 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[48]: starting
AirPort_Athr5424ab: Ethernet address xxxxx
AirPort: Link down on en1
May 3 11:51:32 xxxcomputer fseventsd[72]: event logs in /.fseventsd out of sync with volume. destroying old logs. (13 218 724)
AirPort: Link up on en1
AppleYukon2: 000000.00000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:32 xxxcomputer fseventsd[72]: log dir: /.fseventsd getting new uuid: xxxxx
May 3 11:51:32 xxxcomputer ntpdate[88]: can't find host time.apple.com
May 3 11:51:32 xxxcomputer ntpdate[88]: no servers can be used, exiting
AppleYukon2: 0000,0000 sk98osx_dnet - recovering from missed interrupt
May 3 11:51:41 xxxcomputer /usr/sbin/ocspd[97]: starting
May 3 11:51:32 xxxcomputer /system/library/coreservers/loginwindow.app/contents/macos/loginwindow[68]: login window application started - threaded auth
ciscoVPN: attempting to attach to all available ethernet interfaces.
ciscoVPN: checking if we are already attached to interface: en1
ciscoVPN: no, not yet attached to interface: en1
ciscoVPN: interface: en1, filter attached.
ciscoVPN: current MTU for en1 is 1500, saving it.
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0019ca06, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x01b51000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x0549c004, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x36077b58, ESI: 0x00000000, EDI: 0x36077c3c
EFL: 0x00010246, EIP: 0x0019ca06, CS: 0x00000000, DS: 0x00000010
Error code: 0x00000000
Debugger called: <panic>
Backtrace (CPU 0), Frame: return address (4 potential args on stack)
View 6 Replies
View Related
May 14, 2009
I was updating my mothers ibook G4 and after the two restarts it gives me this. Is there any way to get past this she does not have a back up of her HD.
View 6 Replies
View Related
Jul 21, 2009
I'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
View 19 Replies
View Related
