OS X V10.5 Leopard :: Getting Kernel Panic After Installing Update?
Jun 12, 2012After installing update I am getting a panic debugging in start up
Info:
MacBook Pro, Mac OS X (10.4)
After installing update I am getting a panic debugging in start up
Info:
MacBook Pro, Mac OS X (10.4)
I am trying to install leopard on a g4 450 dual processor with a gig of kingston ram. I received this computer with the Question mark folder, witch appears after startup. I get the boot menu select the external hard drive from witch the leopard dvd is on. I have inspected and tested this and it works on other macs. After o select it about 15-20 seconds go by then the lovely kernel panic happens.
View 1 Replies View RelatedI have a PowerBook G4, 1.33 GHz, 512MB ram and I am having trouble installing leopard. I have backed up the hard drive and erased it for a clean install. Every time I go to install if freezes at "calculating estimated time remaining" and gives a kernel panic error. I am unable to check the panic log as the hard drive was erased. I have already repaired disk, reset pram etc.
View 2 Replies View RelatedI'm trying to get OSX installed onto my new intel x25-m SSD, but it just won't happen. Trying to boot from my install DVD that came with my new Mac Pro throws up a kernel panic after about a minute or two of loading.
Trying to boot from my store-bought Leopard DVD does nothing. After restarting it just sits there and the DVD stops spinning after a couple minutes. Is there another way I can turn my new SSD into the boot drive? This is driving me nuts.
Unfortunately, I've installed the latest update 10.7.4 from apple. Since I've upgraded I had 8 Kernel panics happening sometimes without even touching the macbook pro.this is the latest kernel panic report : Â Â
Interval Since Last Panic Report:Â 33787 sec
Panics Since Last Report:Â Â Â Â Â Â Â Â Â 2
Anonymous UUID:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â D509E77E-1936-47EB-9C95-EAA0CEC13E11Â Â
[code]....
Info:
MacBook Pro, Mac OS X (10.7.4)
My girlfriend has an imac g5 running panther, she was able to get a copy of tiger also for the g5 from her job. Is it possible to run this operating system on her imac.
When i tried installing i got a kernel panic.
Her imac has a 1.6ghz power pc processor.
756mb ram
60 gigs of space left
It`s not able to do any apple update since 1 month ago.And since today morning it refuses to recognize my magic trackpad, when i try to use it i get a Kernel Panic.
[code]...
Info:Mac mini (Mid 2011), Mac OS X (10.7.2)
I installed 10.7.3 (combo) from 10.7.2 yesterday on my Mac Mini and everything was smooth-ish, a bit of slowness here and there.Â
Today my Mac crashed completely, I couldn't Force Quit the app I was in, nothing. So I held down the power button and did a restart. After I did this, all I got was the grey apple with the spinning wheel for ages and ages, and then got a Kernel Panic screen.Â
I did what it said and restarted again. This time it just repeated and repeated the startup tone, and then going to kernel panic again.
I have tried everything I know of. P-RAM reset, Safe Boot, but nothing works.Â
Info:
Mac mini, Mac OS X (10.7.3)
Since 12th May when updated to 10.7.4 have at least one kernel panic per day sometimes four per day which means iMac i3 is useless for running a server platform. Multiple entries about this form may users is there a bug in OSX update? My recovery partition holds 10.7.2 any idea if this is bug prone as well?
Info:
iMac, Mac OS X (10.7.4), Still occurs if Safari 5.1.7 not in
I have a one year old MBP. A few minutes ago I installed the Thunderbolt Update that Apple released today. At the conclusion of the update, it said it had failed to install and that I needed to restart the Mac. On doing so, I got a kernel panic. And now every time I try to boot, I get a kernel panic.Â
Info:
Mac Pro, Mac OS X (10.7.2)
Since yesterday I have not been able to boot normally into Leopard. I had just switched of my ADSL modem and the computer froze after that it never boots in normal mode. I am in safe mode, the audio does not work in safe mode, everything is working. I am attaching the crash report in text format. I did try to boot after removing all the peripherals, also tried to reinstall but the computer does not accept the install disk , just ejects them. I am in real trouble now, suggestions are welcome. I am using a PowerPC machine specs PowerMac G5 1.6ghz with 1.25 GB RAM running OS X 10.5.5
View 5 Replies View RelatedI have a 2 GHz Intel Core Duo MacBook with 1GB of SDRAM. I have OS X Tiger v. 10.4.6, and I just recieved Leopard v. 10.5.4, and I am attempting to install it. If it makes any difference, I have my harddrive partitioned - 40GB for OS X, and 30GB for Ubuntu Linux (8.10 Intrepid Ibex), and rEFIt to switch between the two. I booted into Tiger and popped in the Leopard installation DVD. A window popped open with an icon to install Leopard. I double clicked on this, and it told me to restart. So, I pressed the restart button in the window, and the computer restarted, automatically booting into the OSX DVD.
The Apple logo popped up, with the little spinning wheel. It churned for a few minutes, then it had a kernel panic: So, I did as the notification told me, and restarted. It automatically booted into the DVD again, and the same thing happened. Next time, as a booted up, I held the eject key down, and I was able to get the DVD out. So, I'm back to where I started, but I don't have Leopard installed. There are several minor scratches on the DVD, but nothing I would expect to mess with the DVD. Another thing: I popped in the Leopard DVD, and opened the Disk Utility after this fiasco, and verified the DVD. I got this error output:
Code:
Verifying volume "disk1s3"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid node structure
The volume Mac OS X Install DVD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
However, the "Repair Disk" button is greyed out. I don't want to go through the Apple Support Hotline.
Bought a new Macbook Pro 2.8 a few days ago (newest one with longer battery), it shipped with Snow Leopard. However, I believe the Hardware is still the same as before Snow Leopard was released, so it should work with Leopard 10.5.
If I try to use a Leopard disc it just doesn't boot, or it comes up with a kernel panic. I even installed Leopard on my 2.5" in my Mac Pro first, then tried booting it on the macbook pro. Same thing, kernel panic. Have they added some kind of lock to the hardware that stops Leopard from being loaded? I thought they would only do that when new hardware is released.
I am pretty new to the forums but I installed snow leopard on an 2008 iMac 2.4 ghz, 3gb of ram and 250gb hard drive on September 1, 2009 and had no problems shutting down.
Then on Wednesday when I shut down it goes into a kernel panic and tells me to restart. When I go into the other user account it does not do that. I have a picture of the error log that i got when I started the computer up to submit to Apple. Can someone please help.
I have reset PRam, repaired permissions, and reinstalled Snow Leopard but recovered it from a Time Machine Backup. I do not know what to do.
First the bad news - consistent kernel panics
Good news - found a remedy in disabling my screen saver.
I'd like to use my screen saver without getting kernel panics. I've tried erasing my drive and restoring from a back up. resetting PRAM, repaired permissions and ran Tech Tool Pro 5 (file structures and repaired permissions, everything else checked out fine).
I have a Macbook with 10.5.4 and got a kernel panic suddenly. My Macbook was off. Yesterday evening I shut it down and everything was well with it, no problems at all. This morning I turned it on, and after the normal grey screen at the startup, I got a kernal panic before Leopard even started. I am familiar with kernel panics but not when they occur before the system started. I turned my Macbook off and on again while holding the Alt, Apple, P and R keys and waited for the chime, 3 times. After that, my Macbook started normally, no kernel panics, it just started the system and I was ready to go. However, I am really scared now. Does a kernel panic at startup indicate harddisk problems? Was it just a coincidence? I am afraid to turn my computer off, it might get a kernel panic again. I checked permissions and all seemed well, but I am hoping someone can tell me more about kernel panics at startup.
View 3 Replies View RelatedI've upgraded my MBP to Snow Leopard today from Leopard and I'm getting a Kernel Panic when I login as one user. Logging in as an Admin user or a new user account is fine, and I still get the Kernel Panic if I boot up in to Safe Mode. It's obviously a problem with the user account and looking at the dump log it seems to be caused trying to mount something, but I can't for the life of me track it down.
[Code]
Installed Snow Leopard (retail box) onto a last-gen Aluminum MacBook Pro (2.6Ghz model). Did a time machine backup. Put in CD and upgraded. Rebooted with no peripherals plugged in and I get a kernel panic. There's only one user on this machine so I can't see if it's an account problem. I did the same thing on both my Macbook Air and 17" MacBook Pro.
Question: Do I have to now Reinstall Leopard (fresh)
Then update Snow Leopard
Then restore from Backup?
OR
Install Leopard
Recover from time machine backup
Then install Snow Leopard
I don't have all day and really don't want to screw up the process. Is there any thing else that might say why this kernel panic is happening?
Over the weekend I tried to backup my MacBook Pro onto an external harddrive, and when about 23Gb out of 110Gb were completed, my mac went into a kernel panic ("You need to restart your computer. hold down the power button until it turns off, then press the power button again." in four languages). Previous backups went fine. So I did a reformat of the ext. hdd, same thing: after about 20 or so Gb of backup, the msg. pops. otherwise the mac runs without problems. Did a virus check, which came up negative.
Here is the panic log:
Interval Since Last Panic Report: -6 sec
Panics Since Last Report: 1
Anonymous UUID: 7254B2B2-A9E2-40B3-9A00-06A141425C7F
Mon May 28 06:53:53 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00270ea8, type 14=page fault, registers: .....
Info:
MacBook Pro, Mac OS X (10.7.3)
How to do a safe reboot on my MacBook Pro when kernel panic message appears?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
I had a kernel panic few days ago, and there's no audio on youtube, itunes after the attack......
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
My macbook recently had a kernel panic while running Leopard i got from the previous owner. (restart screen at turn on, would keep showing it.) I re-seated the ram, tried with one out and one in, vice versa, reset the PRam, the NVRAm the EVERYTHINGram, still no go.
I reinstalled the os using the install disks that came with my macbook, but of course it had to come with tiger, so now im back in circa 2006.I also have a macbook pro. Would i be able to use the macbook pro's CD on my macbook to give me Leopard?
Sounds like a desperate need for some Kentucky Fried Chicken while waiting for your 10.6 install.
View 2 Replies View RelatedI am just starting a new job and have been getting extreme speed issues on my computer followed by this recent kernel panic. I am running 4 2 TB G Speeds through eSATA. My computer went down, when I brought it back up Final Cut Pro took 5-10 minutes just to simply open. I wasn't even attempting to open a certain project. Any ideas based on the attached Kernel report? [code]
Info:
Mac Pro
I'm getting a kernel panic at start up and the optical drive wont read the start up DVD. I can boot up windows via bootcamp and the machine runs fine. I'm not getting any red LED's on my risers, so i'm assuming its not a RAM issue. I have a Mac Pro 8-core (2008) stock, just added 10 gigs of RAM.
View 1 Replies View RelatedFor the past few days (never happened before) my apps started crashing continuously and kernel panic screen started appearing very frequently. I am still wondering what may be the cause of it, then I tested my RAM with Rember, and this log showed up:
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
I know a lot of people dread this, let alone ask this. But how do you cause a voluntary kernel panic in 10.4?
View 8 Replies View RelatedI get kernel panics after a few min's of running the Mac pro. The ram are perfectly paired (2x 4gb in both slots, both in the first 2) and I get issues with it it seems. It started to happen as of today but didn't happen the days before. Nothing was changed in the configs or software.
View 3 Replies View RelatedI recently got a Dell 2209WA with built in USB hub. and great i thought, i can manage the USB ports on my macbook a bit more effectively. But it seems when i pull the USB cable when i want to go portable, it gets a KP, at the moment i suspect it has something to do with the logitech wireless adaptor i have plugged into the monitor. it exhibits these issues when the monitor is turned off as well.
I have another USB hub, but i pretty much use it exclusively for my external hard drives (i don't really like to keep it plugged in all the time, if powered up for some reason the drives spin up in the middle of the night even when the macbook is sleeping) and it does nothing like this when the adaptor is plugged into that.
I've had two of these in less than 24 hours on this new machine. I was able to work in Photoshop and Aperture fine, but the minute I started watching Hulu videos I started getting these. Oddly enough. I zapped PRAM and repaired permissions, and haven't had another one yet... but should I just take it back now while I'm still in my 14 days?
Here is the log:
Mac OS version: 9G3553
Kernel version:
Darwin Kernel Version 9.6.3: Tue Jan 20 18:26:40 PST 2009; root:xnu-1228.10.33~1/RELEASE_I386
System model name: MacPro4,1 (Mac-F221BEC8)