I have a 15" Imac G4 I bought used off of Ebay. It was doing great and then I clicked to look for updates. So it downloaded a 168mb file to update 10.4 to 10.4.1 It automatically tried installing, but then said it couldn't install and that it was moved into the trash. So I took it out of the trash and dragged it on my desktop. Then when I went to turn the computer on, it only shows the grey screen!
View 1 RepliesI am using Comcast as the internet provider for my computer.They recently sent an email saying they highly recommended downloading Norton Internet Security for Mac [Norton 360 Technology].They are offering this Security package at no charge.The reason they say they are offering this is because their "Constant Guard" has identified my computer as possibly being infected with a bot.I am fearful of installling this if it will "mess up" anything already on my iMac.
Info:
iMAC, Mac OS X (10.5.7)
I'm downloading a long patch for World of Warcraft, and I want my iMac to stop burning up so much Heat! Can I 'half' turn it off or something - so that it keeps downloading but relaxes and cools down?
View 2 Replies View RelatedI just purchased a new iMac. I moved my iPhoto library over from my MacBook. Then I enabled Photostream and now it says it is downloading 26,000 pictures to photostream. It has been spinning (in process) for a long time.
Info:
iMac, Mac OS X (10.7.3)
I have a 2 week old iMac 27", i7, 2tb Hard Drive, 16gb RM
In the second week the boot up times became very slow.
I would turn the machine on and get the chime within 5 seconds or so.
Then just a black/blank screen.
Eventually after about 10mins I would get a white screen then it would boot up normally.
Now the machine just doesn't get to the white screen. So I get the chime and then just darkness. It does sound like the machine is on (usual quiet imac whirring).
I've tried various key commands when I turn the machine on including pressing C with the install disk in the dvd drive and the alt, control, P, R pram reset.
I've also tried unplugging all the cables, leaving the machine for a minute and switching back on. I did manage to perform the PRAM reset once. I reset the machine and it booted fine.
But now when I switch it on just darkness.
I've called after sales and will try to get the machine replaced but in the meantime is there anything I could try that might make the machine work? I need to do a remix this weekend (deadline Monday) so really need to get it working.
Whilst I realise that these games are for the PC, I have just switched to a Mac and would like to continue playing these games.Is there any way of getting my Mac to be able to do this?
Info:
iMac, Mac OS X (10.7.3)
I just recently switched to the cloud from mobile me and realized my imac didn't have Lion so I'm having to access email through internet rather than through MAIL. Before the switch, I could receive Vectorworks files via email and drag to my desktop and then open in that application. Now, the file comes in as a .vwx but I get the message "There is no application set to open the document" It then asks if I want to choose an application on my computer but it won't let me choose Vectorworks.
Info:
iMac
I have been unable to download a video from my son's Sony video camera to my iMac. It doesn't recognize something?
View 2 Replies View RelatedWhen i try to install it, it gets to 97% then says i need to close safari but it's not open and i have no other programs running
Info:
iMac
I have a Imac PPC with a 2Ghz processor and 1GB of Ram. I am running leopard 10.5.8. Recently i woke the PC from sleep mode to find a blue screen with only the cursor working. Using the internet, I determined how to get the PC booted in safe mode. I have used all the disk utilities at my disposal along with onyx and cocktail to try and fix what I believe is a startup problem. I hae booted the PC in single user mode and tried the fskc codes, which i believe is just the same as the disk utility. Based on my computer all permissions are correct and there is nothing wrong with the HD. The PC still will not boot normally. I have even done an archive and re-install of Leopard.
Info:
iMac, Mac OS X (10.5.8)
Mac extremely slow since recently downloading latest "numbers" software update. Also Mac when put to sleep, will now wake up by itself and go back to sleep etc, etc.
Info:
iMac, Mac OS X (10.7.2)
I think it worked at one point, but sometime around the point when I set up Fusion with the partition, Windows Aero turned off and is no longer an option in the display settings. I installed this driver with the modded INF to see if it would do anything, but Aero is still not an option. I also have issues playing some games in Fusion, while they work fine in Boot Camp.
View 7 Replies View RelatedI'm using a 20" white intel iMac and cannot manage to remove a linux boot disc from the optical drive.At first, the only way that i managed to boot to the linux disc in the first place was from the Startup Disk menu in OSX. I could not even get to the Startup Manager ('opt' at boot) or boot straight to the disc ('C').Now i'm in a position where no matter what i do, the system boots to the linux disc. I cannot even force the startup into OSX to try to eject the disc from there. I've tried holding all of these keys/combinations at startup
View 3 Replies View RelatedBack in August, I did an OS update on my iMac, and the machine wouldn't reboot. I was able to reinstall Leopard by booting from a disk, and all was well for a few more weeks. The machine seemed to run normal, with the exception of 5-minute-plus boot up times. But within a few weeks it stopped booting. I installed Leopard on an external HDD and figured I'd leave the internal alone until Snow Leopard came out.
A few weeks later when SL was released, I booted from the install disk, found the internal HDD, and went through the installation process. Everything went fine but the machine would not boot. I installed SL on my external HDD running Leopard, and everything was fine. I've since been running my computer off the external.
The internal HDD no longer shows up on the desktop, in Disk Utility, etc. I'm fearing it may have died. More worrisome, though, is my machine doesn't always boot up, whether from my external HDD (set as the startup disk) or from CD. By "doesn't always boot up," I mean most of the time when I restart, it just sits on a gray screen, nothing happens (even when holding "Option" or C.) Sometimes it will boot, but takes 20 or 30 minutes to do so.
I'm considering replacing the internal HDD, but am curious, does that seem like the issue, or might the failure to boot from externals and CDs indicate a more serious problem?
Why does my mac stop downloading files, copying to clipboard, saving files to desktop, etc?
iMac g5 1.9 ghz 17" running 10.5.8. Had a hard drive crash and bought a new one. Loaded new OS leapord. Everything works fine at first, but after the computer has been on for a while, it will stop downlading files, disk verify doesn't work. I can't copy and paste stuff. It seems as if the hard drive is full, but I have only used 32GB of 300GB.
When I restart, it works again, then slowly not. Is it an overheating issue? How do I know if my fan is running? Is it a bad hard drive I put in it? Bought it new with three year waranty.
I have the CD version of tiger and am trying to install it to a recently purchased iMac G3. The Installer installs disc 1, resets, but doesn't boot up to install disc 2, it simply asks again to install disc 1. The Mac for some reason will not boot from the installed software and therefore I cannot complete installation. Can anyone figure out why the mac refuses to boot from the HD in order to install disc 2?
Info:
iMac, Mac OS X (10.4)
When I look at "About This Mac" it says that I have a 2.4 GHz Intel Core 2 Duo. I originally had two 1GB sticks. When I installed two 2GB RAM sticks, it wouldn't boot. Just for fun, I tried putting one 2GB and one 1GB stick inside, and it boots fine.
[URL] says that I can have up to 4GB: [URL]
But the guides say that it depends on if I have Merom w/ Santa Rosa chipset or not:[URL]
But I read somewhere else that even if I install two 2GB sticks that it will just ignore the power of the second one and default to 3GB.
I found this beautiful 17" eMac at a yard sale! it is pristine I fell in love. I went about removing the stuff left behind by the old owner. Now it does not boot.
After a while I get the question mark on a folder. I know what I did but not how to get out of it. I have no OS X disk to start it from. What do I do now? I did try to reset some things but no good.
I am finding conflicting information when I search but can a new iMac boot from a USB drive?
View 7 Replies View RelatedI am trying to upgrade my iMac G3 from 10.2 to 10.3, When I try booting any cd it always just continues booting to the os. I know the drive works, because I can read the disk in Jaguar.
Info:
iMac
IMAC 20" 2.1Ghz
I replaced the hard drive with my other HD. It is loaded with Tiger alread but I don't have recovery discs.
Can I download the start up files onto USB and start up that way?
Info:
iMac, Mac OS X (10.4.7)
In 2011, my iMac was sent to hell for a crime it most probably did commit. This Mac promptly crashed and caused the destruction of my WD 1tb External HDD containing my recently backed up files. Today, the iMac will not boot up.
View 2 Replies View RelatediMac intel core duo...
My computer had 1GB of RAM, so I just bought a 2GB RAM card. When I installed both cards together i can hear the hard drive start up and then nothing, no boot up, just a black screen and the "sleep" light is just solid. I know both cards are fine because I tested each by themselves and they both started up and worked well, its only when they are both in at the same time does it do this. also both slots work because i tested both of them! I tried to do the PRAM reset and it doesnt work, and I tried to do it with one card in and then reset and then shutdown and install the 2nd card and still nothing. Please give me some advice, i am soooo frustrated!!
The string of problems I've encountered started a few days ago. I normally let my imac go to sleep by itself but, on this occasion I told it to sleep via the apple menu. When I awoke the imac the screen was frozen. No mouse movement, no clock movement, nothing. At this point I turned the power off and back on again. It didn't get past the white screen (before the gray with apple logo). I then tried resetting the PRAM, booting in safe mode, and booting from my os disc. Nothing worked.
After several tens of tries it magically booted. It stayed active long enough for me to back up all my data (transferring at least 100GB), reformat the hdd, reinstall leapord, transfer data back, and use it until I let it sleep again.
I have a iMac(20") for about a year now and its ran great up untill now. It is hanging on boot. Sometimes its the white screen with apple logo and spinning gear, other times the screen goes blue and i can see it load a mouse cursor for about 2 seconds, then the screen goes through a few shades of blue and the spinning gear re-apears with no apple logo. The computer then loops. I tried to boot to safe mode, but as i have the sound off i am not sure i am holding the shift key at teh proper moment. If anyone has any advice, please, please let me know. my mac reinstall cd is about 8hrs drive from where i am, and i do not know if mac issues replacement cd's.
View 1 Replies View RelatedMy iMac just crashed. All apps except finder gave me the beach ball, and force quit wouldn't load. I cold-booted it and it is now stuck on the screen showing the apple logo and the pin wheel, except the pin-wheel doesn't spin!
View 3 Replies View RelatedI have a 24" imac with the dualcore. Yesterday I was pasting something from Illustrator to photoshop and it froze. The ball spun for about 5 mins, force quit would not come up so I held the power button and shut it off. Now only the grey screen comes up like its booting, apple logo and spinning wheel. I started in safe mode and ran fsck but it seemed to take forever (hours) and never finished.
View 4 Replies View RelatedI have an IMac with Mac OS X 10.5 on it. Here is what happened: I wanted to network my imac with another pc in the room that has Windows on it. I set permissions to allow read write access for other computers on the network. The pc on the network were displayed on the imac but could not be opened when clicked on. Message box stated needed to reboot imac.
On rebooting the imac all that comes up is grey screen with apple symbol and gear running underneath it. Tried booting in safe mode-screen displays progress bar.Progress bar completes and then goes away and then all i have is a grey screen with an apple symbol and rotating gear. Also tried resetting the PRAM which ended with same result of grey screen,apple symbol and running gear. Have recently moved and can not find my install disc.
Whenever I turn on my computer, I see a flashing folder icon, occasionally interspaced with a globe icon. I read elsewhere that this lasts for several minutes, but it can go on for an hour without pause. I tried booting up from my install disc, but couldn't get the computer to acknowledge it.
I was able to start installing with a 10.5 upgrade disc, but was unable to complete it because the computer did not already have 10.4 or later on the HD (for the record, I was on 10.5.8 before it crashed). I tried restarting it from the Network.
I can't even access my HD through a firewire cable; the HD simply won't show up on the host computer's screen. I'm pretty sure this means that my HD is hosed, but I thought I'd ask to make sure.
My iMac won't boot up. All I get is the apple logo and a spinning circle, just sits there and spinns.
Info:
iMac 20, Mac OS X (10.7.2)
