I replaced my 200gb 5400 hard drive in my 15" Macbook Pro, Early 2008 model, with a WD Scorpio Blue 500gb 5400 hard drive. I cloned the drive with Carbon Copy Cloner and everything seemed to go smoothly. But after I began using the Macbook in earnest, I noticed a delay in response at certain times. If I type in a word processing program, I will type five to six words, the cursor won't move, then I'll get the rainbow spinning wheel. After five to six seconds, the line will appear quickly, letter by letter, until it catches up. If I keep typing, everything is fine, but once I stop for 20 seconds or more, the same thing happens. Being more observant, I began to notice hiccups in other programs as well. I'll give a trackpad input and the spinning wheel appears, then the program catches up.
I then began to listen closely to the hard drive. After 20 seconds of activity, it sounds like it slows down, even going to sleep--although I'm not sure if that's truly what it's doing. It's only when the hard drive seems to slow/stop that this lag in input happens. If I keep giving inputs before the slowdown, everything is fine. Here is what I've done to troubleshoot. Perform a verify disk from disk utility. No issues detected.
I've unchecked "put hard disk(s) to sleep when possible." Still have same problem. I've booted from the old 200gb HD which I encased in a disk enclosure and the lag time doesn't occur when using it. Is there something else I should have done with the BIOS or something else when installing? Also, I bought the HD from Amazon. If the HD is defective, does anyone have experience to know whether WD will send me a new HD or do I have to go back through Amazon to get a new one.
Recently, my iMac 27" i7 has begun hanging in the most bizarre fashion. It usually seems to happen when I wake the computer from sleep or screen saver, but that isn't always the case. What will happen is that when I get to the computer, Mail will show symbology that indicates it is not connected to the Internet or Safari, upon booting, will not open a webpage (it sits on a white screen rather than delivering an error). I'll go to quit one of the offending programs, and it will not quit and beach balls instead. I then right click on the dock to trigger a force quit, and the force quit does nothing and the dock beachballs. I try to restart/shut down, and nothing happens. Thus I am forced to hard restart.
Conversely, I am sometimes able to get an offending program to force quit, but the rest of the computer (anything I click locks up) beachballs leaving me to hard restart. I find when this happens, my first instinct is to click system prefs and go to networking, where when I click networking, it locks up. Then I have to hard restart. Finally, there are times when it does respond to a restart request. It will go through the restart process up to the blue screen at the end, where the little spinning doohickey will appear and stay there indefinitely, forcing me to hard restart. It didn't seem to happen before I got my iPad but happens about every other day now.
At first it seemed to happen after I had my iPad charge from my computer, but now it seems to happen regardless. One time it hung while syncing with my iPhone and required me to restore it since the phone got messed up. I've done everything I can think to do to get to the source of the problem and I can't figure it out. I've looked through logs and didn't see problems (granted, I don't know if I'm looking at correct logs or if I'm looking for the right events). I have repaired permissions, and that seemed to help but not fix the problem. I bridge my iPad to my computer through Internet connection sharing, since I have an Ethernet internet connection. I created Automator work flows to turn it on and off (and AirPort) as I never leave it on when not using it.
My iMac (27'', mid 2010, Core i7, OSX 10.7.4) recently makes some trouble with its DVD drive: The drive often makes horrible noises like a shredder. In this context the disc sometimes doesn't eject. Only Rebooting works. More and more frequently the drive hangs, the connected application (e.g. iTunes, Auditri or Handbrake) hangs and also Disk Utility. Rebooting doesn't work (white freezing screen), only shutdown and complete startup with clicked Trackpad to remove disc. Is it a hardware or software error? The iMac is still qualified for AppleCare. Should I make a repair request to Apple?
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'. I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Had a hard drive failing/failure. I am having my bad hard drive replaced with a bigger hard drive. (New Obviously) I have an iMac. (1.83GHz Intel Core 2 Duo 17-inch) To have my data transferred from the old drive will cost over a hundred bucks more. I am trying to save money but transferring it myself. All im looking to transfer is my photos. I did not have an external drive but i WILL purchse one now. My question, (to save some money) is how would i transfer my old pictures from my old drive, too my new installed hard drive. Can i use USB? Firewire?
I've just got a new external HD, but it's not being recognised by Mac OS X (10.5.7). I assumed it was because it was in a Windows format, so booted Windows, but it then turned out it wasn't formatted at all. What is the easiest way to make this an HFS+ (the Mac OS extended format), and how do I do it as I can't see it anywhere on the Mac (including Disk Utility)?
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
Whats the difference between a PATA hard drive and an ATA hard drive?
I bought one of ebay for my 15" Powerbook, i got it today, and it doesn't work lol. But the post clearly says, will work with all ibook's, and Powerbooks, So im not sure if it's the right kind of drive. The HD i ordered is on route for a replacement, so hopefully it was just a defective drive.
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
I have a Imac 20 with a small 3.5 hard drive and I have bought a bigger 360 gig 3.5 hard drive to replace the old one. I have the new one in an external case with USB 2.0 right now. Is there some way I can transfer the entire contents of the old hard drive on to the new one and then swap out the old drive with the new drive and not miss a beat?
I have to hard drives in my powermac. And I am running out of space with the one that has the OS on it.
I want to make the 2 internal hard drives i have appear as one so i can still install and use things that say "must have mac OS installed on this drive to use" or whatever.
i've heard of people using RAID to join them, but i want details on how i could do this.
I have an iMac G4 with a failed HD. I know this because it boots from my external drive. Does anyone know where I can find the Hard drive part # and a take-apart guide?
Firefox has been prompting the spinning beach ball a lot lately and forcing me to use force quit, has anybody else noticed this and does anyone know why ?
Running OSX 10.9.2 on a MacPro (2x2.26 GHz QuadCore; 32 gig 1066 MHz). In the last few weeks TextEdit will open and work once, but when I go back to it later in the day it's spinning and I have to Force Quit it, reopen, to get it to work (again, only once). I can't find an update to it anywhere - what can I do? I use it a lot to reformat text.
