OS X :: Hard Drive Failure On MacBook - What To Do
Jun 12, 2010
Just experienced a hard drive failure right now on my MacBook (2007). Everything had froze and I shut it down. When I started it again, the screen was dimmed and the Apple jingle went on a louder sound then before. Is this a sure sign of a MacBook hard drive failure or would it be related to something else, for example, the logic board?
Also, what should I do now? Last full backup was 3 weeks ago and I had worked on lots of things between that period of time and now.
View 4 Replies
ADVERTISEMENT
Oct 6, 2008
I have a white mb 2.4 250 GB SD. Purchased new in late feb. The hard drive went bad in september. Then in october it happened again. My question is how many time does the hard drive have to go bad before i can get a new computer? If apple updates the macbook how do they determine which config i would get as a replacement? How would it affect apple care? i have registered it already.
View 10 Replies
View Related
Jan 13, 2010
As I am in the process of replacing a hard drive on a Macbook Pro, I begin to notice that there are MANY posts and experiences of individuals having to replace a dead hard drive at some time or another in their Macbooks. Is this typical? Should this be something I'm prepared to endure? Would it make more sense to buy my own hard drive in addition to a new MBP?
It's ridiculous that I even have to worry about something like this on a new purchase but I'd like to be prepared.
View 16 Replies
View Related
Sep 9, 2009
I'm pretty sure the problems we're having with a white MacBook are due to hard drive problems, but I thought I'd get a second opinion:
- Computer was dropped on a hard floor
- Started making whirring noises and would occasionally lock up or suffer long periods of the spinning wheel
- Disk Utility check, after booting up from the CD, cam back with no errors
- Decided to wipe it and reinstall anyway
- Snow Leopard got stuck halfway through installing, so rebooted. Installation then carried on no problems.
- Still suffering periods of the spinning wheel - it 'shudders' sometimes, rather than spinning smoothly. There have also been a couple of lockups.
View 5 Replies
View Related
Mar 12, 2010
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
View 8 Replies
View Related
Sep 15, 2006
I was using my mom's 500 mhz G3 iBook circa 2k1, running 10.2.0 and it decided to start tweaking out on me. Being a somewhat aware computer person, I thought tat a simple restart would fix all of this. Shows you how much I know. Anyway, the boot-up screen showed the icon of the file with the question mark inside. Find the OS 9 CD that we have and I booted up through the CD. I finish starting up and, to my surprise, the drive appears to be erased- the computer asks me if I want to initialize the disk. I hit cancel and proceed to run the disk repair on the OS 9 CD. After it's done scanning, the the results are: "Missing Thread Record, 62078, 4260". What does it all mean? Will the computer be able to recover? What fate lies in store for the iBook?
View 3 Replies
View Related
Mar 21, 2012
My Hard drive has become corrupted and is going to need reformat. I have managed to mount the iMac as a firewire drive on my Macbook and pulled off quite a bit of data. The repair utility wont fix the drive so I have no choice other than to reformat. Â
How do I get Lion back on?
View 1 Replies
View Related
Sep 21, 2010
Have an early 20" iMac G5 and the Hard drive started to squeal and then crashed. Tested dive in another iMac and it is definitely bad. Installed new hard drive and the system fails to find it. Formatted it on the other iMac and reinstalled but it still is not seen by the system. Everything was running very well until the drive failure. Took it to an Apple approved store, paid the $60 to be told that the Mother Board was bad. It is hard for me to believe that a disk failure could cause a Mother board failure. 2- 20" iMacs, a 24" iMac, and a new 27" iMac (not yet out of the box.)
View 1 Replies
View Related
Dec 21, 2010
My 27" iMac that I purchased on Dec 8 2008 had a HD failure. I was running bootcamp and Win 7 and thought I had a virus but the Apple Store geek said the HD was kaput. This has to be a record for short lived HD's on a Mac. And no, I didn't have extended warranty. Anyone else have such a bad experience? My MBP is chugging along and I'm pretty certain I will NOT partition the HD on the Mac when I get it back tomorrow.
View 10 Replies
View Related
Nov 25, 2009
I'm a new Mac user for about 6 months now. I bought a used PowerBook G4 15" 1.25 ghz notebook that was in good condition. It was well cared for by the previous owner. Only thing she had done was update the ram to 2 gigs.Recently I began to notice it running slower, programs were freezing and Garage Band couldn't run as many tracks. I installed recommended software updates before it started to get slower and I thought maybe that was the problem.So I attempted to do a fresh swipe of the hard drive and start from nothing. I saved some files and then tried to run the software installation cd. It didn't really help at all. I can't remember the error but it wouldn't let me reinstall OS X even when I held "c" when starting up. At one point I must have clicked run in target mode because I booted it up and it showed an unfamiliar screen. Then I restarted it once again and saw on Disk Utility that S.M.A.R.T. said something about hard drive failure.
View 3 Replies
View Related
Jan 15, 2008
I was just wondering if anyone could help me with this. the iBook that I just inherited from my aunt, (She got a new MB) was working yesterday, whenever the power shut-off on it. (It has a power issue on the logic board, and if it comes unplugged it dies, even though it has a new battery.) so she went to work, and attempted to power it on, it came up, and the apple was on the screen, and the spinner came up, nad it spun for a very long time, eventually the screen flashed, and turned blue, and the spinner came again. After around 15 minutes, she was given the kernal panic screen. She held down the power button, and restarted, only to come up with the old finder face, and a question mark. I rush over with my disc's, and load up the disk utility. It was repairing the disk, and about 3/4 of the way through, it had an error. So, I rebooted, and we got an apple, and it repeated the previous situation, and gave the blue screen, followed by a kernel panic. This time I ran the hardware test, and it says that the logic board passed, but there was an issued with the harddrive.
At first disk utility could find the hard drive, and it reported it as being a 2 TB drive!!!!!!! So I got suspicous about that, and after the hardware test, the computer was reporting that there was no hard drive in the computer at all. we know for a fact that the drive was either 50, or 80Gb's, (90% sure 80) My question to you is: Is this the hard drive that has gone bad, or, is it the controller on the logicboard needing to be replaced?
View 5 Replies
View Related
Nov 5, 2009
My iMac G5 is basically dead. Logic board failure. Apple is going to replace it by giving me a credit toward the purchase of a new iMac but that is a different story. I need to send my G5 back to them. Can I take the internal hard drive out and transfer the data to a PC and then get that data off the PC onto an external HD?
View 3 Replies
View Related
Nov 15, 2009
It looks like the hard disk in my 1.5 year old iMac (24" 3.06 C2D, running 10.6) suddenly failed today. I woke the mac up from sleep and pretty much immediately I got a spinning beach ball. The system was totally unresponsive so I did a hard reset. Unfortunately the blinking "?" folder came up on the gray screen, instead of the familiar Apple logo. Booted off the OS X disk and ran Disk Utility. The hard disk comes up as "media" and unrecognized by the system. So no First aid or formatting possible. I'm guessing the hard disk has given up but before purchasing a new one I want to rule out anything more serious like motherboard issues.
View 7 Replies
View Related
Feb 19, 2012
(i7 27" iMac/256GB SSD + 1TB of internal disk hard drive. (SATA/7200rpm/3.5"))The 1TB internal hard drive on my iMac failed the S.M.A.R.T. Utilities test so Apple called in the computer and I had to have the hard drive replaced. The technicians reloaded the system from a 1TB external Western Digital hard drive; I had backed up the everything on it using Time Machine.
Unfortunately, the iTunes application cannot now locate my iTunes library. I create a lot of slideshows on Aperture and use music from iTunes on the audio tracks. The titles on the audio tracks are now inaudible and are preceded by a yellow triangle with an exclamation mark inside.
how I should re-establish the original link between iTunes and its library. The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (declangreaney) on the 1TB of internal disk drive.In trying to solve the problem, I went through the folders and double clicked on one song. This opened iTunes so I highlighted and dragged all the other 'artist-named' folders on the iTunes interface and in doing so, I succeeded in accessing all the files.
Info:
iMac, Mac OS X (10.7.3), (i7 iMac/256GB SSD + 1TB Int. HD
View 12 Replies
View Related
Jun 7, 2012
I have a 1TB GTech GRaid external hard drive, which seems to have gone on the blink. When I start it up it spins into action but then following a small clicking sound winds back down again. It then spins up again, and then with a click winds back down again. This goes on and on and on. What is the best way of hooking up the internals of this drive directly to the Mac Pro? Or is there a better option to start the drive as it stands, without having to open it up?
View 3 Replies
View Related
Apr 24, 2012
I take a chainsaw to my Mid 2009 Mac Book Pro.It had been pretty faultless until recently when it started being slow to boot and generally just hanging for a short periods, and then carrying on as normal.Then I had major errors on the 500gb hard disk, which prevented the machine from booting. Using disk utilty, I decided that I needed to wipe and start again. Fortunately much of the data was backed up. I re-installed and all was well for a short while. However, about 3 weeks later I had the same issue, and so I decided to replace the hard disk, even though it did not seem to have any errors or SMART warnings.I put in a new 750Gb disk, and all was well for a few months. Last week I was working abroad in Norway. I rebooted into boot camp to run some software and then back again into OSX and then disaster struck again. (Strangely my boot camp partition has had no issues at all on either hard disk). I couldn't boot into OSX and the emergency recovery (I'm on Lion) came up. Disk Utilitiy told me that the it couldn;t repair the drive.
Now after two hard drives I am a little stuck. The incovenince is massive as I am a working all over the place and rely on the my normally trusty MBP. I am almost ready to replace the MBP, but in truth I can't really afford to do so (in these economic times).Can anyone point me as to why this may be happening. I am hoping it may be bad Ram (easier to replace than a board), but can anyone point as to how to diagnose it. The apple hardware test program I remember for the pre-OSX days doesn;t seem to available now.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 8 Replies
View Related
May 13, 2012
Macbook Pro won't boot. Symptoms preceding failure included failure to open Firefox. When trying to cold boot I can get as far as the start-up sound, the Apple logo, and the spinning whieel (spins for a bit but not for very long) and then major failure. Not running Liom.
Info:
imac 10.1, Mac OS X (10.6.2), also have macbook pro running os 10.5
View 2 Replies
View Related
Apr 4, 2010
I've had my iPhone 3g 8gb since June 2008 and loved every minute of it. It's been through it all. Even dropped out of a helicopter last week. Ok it was only a fall of around 6ft but still, it sounds epic. I've recently gotten a hold of a Macbook 2.1 2ghz 13" white. It's a late 2006 model and the drive has failed. I planned on replacing the drive myself and apple have kindly sent me the recovery dvds free of charge. Tiger 10.4.11. I read on here about the extended replacement scheme for failed drives on here last night and I think I qualify, however I may still put my own drive in it. Out of my stick just to get things moving along. Once that has been done I plan on upgrading to snow leopard 10.6. I'm curious to find out what drives this machine will support and how much ram it will take and benefit from.
View 3 Replies
View Related
Sep 5, 2014
I've had my TIme Capsule for a few years now. Last year I decided to self upgrade the internal HDD to 3TB to actually fit back-ups from my two mac's at home. On my MBP the boot drive failed. It's unfixable unfortunately. how to restore full system on a new HDD on my MacBookPro from TimeCapsule, after boot drive failure?
how to connect the laptop with clean/ empty HDD to MBP and make it boot and install it all from Time Capsule. Moreover, I am not sure how to connect it to Time Capsule, so that it doesn't take 3 days to restore.There is both an ethernet port as well as USB 2.0 one too.Â
That 'old' boot driveis still barely running, I wanted to hand copy at least my iPhoto Library of 110GB in size, but it just keeps crashing, as the file is so big. I mean, I should have it all back-ed up on TimeCapsule,
Info:
TImeCapsule, OS X Mavericks (10.9.4), Seagate Agent GoFlex 1.5TB
View 6 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
May 10, 2010
I could use your expert advice. I have a Lacie D2 250GB hard drive hooked up via FW800 to a Dual 1.83Gzh G5 Powermac. Recently the Lacie drive has been writing really really slow. I tested it with a Kona Speed Utility and saw that was only writing between 4MB and sometimes only 1MB/sec. Is this drive about to fail? I ran disk utility on it and hit repair disk and it says the disk health is fine. I ran diskwarrior on it and it said there was a major error in the directory and as I replaced it, Diskwarrior quit in the middle of it.
View 3 Replies
View Related
Feb 12, 2010
My 15" MacBook Pro has been randomly shutting down. I ran Apple Hardware Tools, but it found nothing. So, I ran TechTool Pro 5.0.6 and discovered a SMART drive failure. On the 'Temperature Changes' test, the black indicator is all the way to the right. What does this mean? What do I need to do?
View 2 Replies
View Related
Jan 28, 2010
Firstly here's my config...
MacPro4,1
x2 Quad-Core Intel Xeon 2.93 GHz
Intel X25-M 160 GB SSD (startup disk - second optical bay)
Apple Raid Card
x4 300 GB VelociRaptor - WD3000HLFS (Raid 0 set - 1.2 TB)
Quadro FX 4800
16 GB RAM
Now, to the issue...
When I start up this Mac I receive the following error via the Raid Utility...
Drive 0: failure detected - Previous drive status was unassigned
The Raid Set is not mounted and one of the VR drives are not displaying within the set. I can also not mount the Raid Set at this point. So I then clear the event within the Raid Utility and I then restart the Mac and all is good. No Raid errors, the Raid set (volume) is mounted and all 4 VR drives are present within the set. There is no data loss on the Raid Set and the cycle continues. Basically, I have to go through this procedure every time I startup.
View 1 Replies
View Related
Apr 22, 2012
I tried to partition my main drive and it failed, however it is now saying that 200 gb of space on my main drive is used up. The partition was only for 100 and I have no idea what happened.
View 3 Replies
View Related
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Oct 1, 2008
I have a single boot disk with just the apps on, and 2 disks in a software mirrored RAID in which I keep all the important stuff.Its just occurred to me, if the boot drive fails won't the software RAID be destroyed as well?Or will it be easy to recover the data off one of the previously RAID1 disks, when the new boot drive is installed?
View 1 Replies
View Related
