My Hard drive has become corrupted and is going to need reformat. I have managed to mount the iMac as a firewire drive on my Macbook and pulled off quite a bit of data. The repair utility wont fix the drive so I have no choice other than to reformat. Â
How do I get Lion back on?
I have a single boot disk with just the apps on, and 2 disks in a software mirrored RAID in which I keep all the important stuff.Its just occurred to me, if the boot drive fails won't the software RAID be destroyed as well?Or will it be easy to recover the data off one of the previously RAID1 disks, when the new boot drive is installed?
View 1 Replies View RelatedI have recently upgraded my computer. My external hard drive, a LaCie 320GB, is full of stuff that I want to get rid of. Can't delete it. Looked into the permissions and it turns out they belong to an unknown user. I tried clicking the little lock and trying to change permissions, but it will not let me interact with the drop down menu. Â
I believe there is a terminal command to reset permissions locally, however, I cannot figure out how to do so on an external drive.Â
Info:
iMac, Mac OS X (10.7.3)
I have a MBP (Mac OS X 10.6.8 Snow Leopard) with 2.6 GHz Intel Core 2 Duo, 4 GB SDRAM. I am trying to to upgrade to Mac OS X Lion. I have attempted to create a USB installer with a Lexas 16 gb USB memory stick and I have gotten the following error towards the end of the restore:
"Restore Failure Could Not Restore- Cannot Allocate Memory".
What does this mean? Is there anything I can do other than attempt burning a disk (which I don't want to do cause of the lengthy process)? When I review the contents all the installer files are present. Upon rebooting, it appears the installer is working but I have not initiated installation out of fear that the installer is incomplete. Should I attempt installation?
Info:
MacBook Pro, Mac OS X (10.6.8)
Since the harddrive of my IMac was full, I added an external harddrive to the system for my photos. I use another external harddrive for time machine back-ups (backing up both the IMac and external harddrive with my iPhoto libraries). Recently the EHD with my photo libraries crashed. I now want to restore it from time machine onto a new external harddrive, but am not quite sure how to do this.
Info:
iMac (21.5-inch Late 2009), OS X Mountain Lion (10.8.2)
We have i-Mac 20" with built in i-sight Power PC, one of last ones I think before the intel. We have had a few problems before with it powering down and going to sleep. Used to hoover dust out and that seemed to fix it.
Now it won't start at all. I have tried all the PRAM and various commands to re set various things but none of these work. We had a wireless keyboard and I have just tried a wired one but I do not think either are connecting as the tab key light does not come on, which it does when I tested the wired on on my lap top.
When it died it crashed with a cd in drive. I have removed this and replaced it with the mac install disk to try and run the disk check but the optical drive is not starting at all either.
All that happens on start up is the sleep light comes on, then after a few moments fan starts to whirl. I can't hear the hard drive - have tried to rock hard drive to get it to spin but nothing.
Just wondering whether worth trying to replace optical drive or is this being controlled by hard drive - hence its not working nor hard drive. is there any way to recover data if it is the hard drive that is dead? anything else I can try and replace to fix it? could I use an external optical drive connected via USB to start?
I have tried to firewire but not joy their either!
Just experienced a hard drive failure right now on my MacBook (2007). Everything had froze and I shut it down. When I started it again, the screen was dimmed and the Apple jingle went on a louder sound then before. Is this a sure sign of a MacBook hard drive failure or would it be related to something else, for example, the logic board?
Also, what should I do now? Last full backup was 3 weeks ago and I had worked on lots of things between that period of time and now.
I was using my mom's 500 mhz G3 iBook circa 2k1, running 10.2.0 and it decided to start tweaking out on me. Being a somewhat aware computer person, I thought tat a simple restart would fix all of this. Shows you how much I know. Anyway, the boot-up screen showed the icon of the file with the question mark inside. Find the OS 9 CD that we have and I booted up through the CD. I finish starting up and, to my surprise, the drive appears to be erased- the computer asks me if I want to initialize the disk. I hit cancel and proceed to run the disk repair on the OS 9 CD. After it's done scanning, the the results are: "Missing Thread Record, 62078, 4260". What does it all mean? Will the computer be able to recover? What fate lies in store for the iBook?
View 3 Replies View RelatedI have a white mb 2.4 250 GB SD. Purchased new in late feb. The hard drive went bad in september. Then in october it happened again. My question is how many time does the hard drive have to go bad before i can get a new computer? If apple updates the macbook how do they determine which config i would get as a replacement? How would it affect apple care? i have registered it already.
View 10 Replies View RelatedAs I am in the process of replacing a hard drive on a Macbook Pro, I begin to notice that there are MANY posts and experiences of individuals having to replace a dead hard drive at some time or another in their Macbooks. Is this typical? Should this be something I'm prepared to endure? Would it make more sense to buy my own hard drive in addition to a new MBP?
It's ridiculous that I even have to worry about something like this on a new purchase but I'd like to be prepared.
Have an early 20" iMac G5 and the Hard drive started to squeal and then crashed. Tested dive in another iMac and it is definitely bad. Installed new hard drive and the system fails to find it. Formatted it on the other iMac and reinstalled but it still is not seen by the system. Everything was running very well until the drive failure. Took it to an Apple approved store, paid the $60 to be told that the Mother Board was bad. It is hard for me to believe that a disk failure could cause a Mother board failure. 2- 20" iMacs, a 24" iMac, and a new 27" iMac (not yet out of the box.)
View 1 Replies View RelatedMy 27" iMac that I purchased on Dec 8 2008 had a HD failure. I was running bootcamp and Win 7 and thought I had a virus but the Apple Store geek said the HD was kaput. This has to be a record for short lived HD's on a Mac. And no, I didn't have extended warranty. Anyone else have such a bad experience? My MBP is chugging along and I'm pretty certain I will NOT partition the HD on the Mac when I get it back tomorrow.
View 10 Replies View RelatedI'm a new Mac user for about 6 months now. I bought a used PowerBook G4 15" 1.25 ghz notebook that was in good condition. It was well cared for by the previous owner. Only thing she had done was update the ram to 2 gigs.Recently I began to notice it running slower, programs were freezing and Garage Band couldn't run as many tracks. I installed recommended software updates before it started to get slower and I thought maybe that was the problem.So I attempted to do a fresh swipe of the hard drive and start from nothing. I saved some files and then tried to run the software installation cd. It didn't really help at all. I can't remember the error but it wouldn't let me reinstall OS X even when I held "c" when starting up. At one point I must have clicked run in target mode because I booted it up and it showed an unfamiliar screen. Then I restarted it once again and saw on Disk Utility that S.M.A.R.T. said something about hard drive failure.
View 3 Replies View RelatedI was just wondering if anyone could help me with this. the iBook that I just inherited from my aunt, (She got a new MB) was working yesterday, whenever the power shut-off on it. (It has a power issue on the logic board, and if it comes unplugged it dies, even though it has a new battery.) so she went to work, and attempted to power it on, it came up, and the apple was on the screen, and the spinner came up, nad it spun for a very long time, eventually the screen flashed, and turned blue, and the spinner came again. After around 15 minutes, she was given the kernal panic screen. She held down the power button, and restarted, only to come up with the old finder face, and a question mark. I rush over with my disc's, and load up the disk utility. It was repairing the disk, and about 3/4 of the way through, it had an error. So, I rebooted, and we got an apple, and it repeated the previous situation, and gave the blue screen, followed by a kernel panic. This time I ran the hardware test, and it says that the logic board passed, but there was an issued with the harddrive.
At first disk utility could find the hard drive, and it reported it as being a 2 TB drive!!!!!!! So I got suspicous about that, and after the hardware test, the computer was reporting that there was no hard drive in the computer at all. we know for a fact that the drive was either 50, or 80Gb's, (90% sure 80) My question to you is: Is this the hard drive that has gone bad, or, is it the controller on the logicboard needing to be replaced?
I'm pretty sure the problems we're having with a white MacBook are due to hard drive problems, but I thought I'd get a second opinion:
- Computer was dropped on a hard floor
- Started making whirring noises and would occasionally lock up or suffer long periods of the spinning wheel
- Disk Utility check, after booting up from the CD, cam back with no errors
- Decided to wipe it and reinstall anyway
- Snow Leopard got stuck halfway through installing, so rebooted. Installation then carried on no problems.
- Still suffering periods of the spinning wheel - it 'shudders' sometimes, rather than spinning smoothly. There have also been a couple of lockups.
My iMac G5 is basically dead. Logic board failure. Apple is going to replace it by giving me a credit toward the purchase of a new iMac but that is a different story. I need to send my G5 back to them. Can I take the internal hard drive out and transfer the data to a PC and then get that data off the PC onto an external HD?
It looks like the hard disk in my 1.5 year old iMac (24" 3.06 C2D, running 10.6) suddenly failed today. I woke the mac up from sleep and pretty much immediately I got a spinning beach ball. The system was totally unresponsive so I did a hard reset. Unfortunately the blinking "?" folder came up on the gray screen, instead of the familiar Apple logo. Booted off the OS X disk and ran Disk Utility. The hard disk comes up as "media" and unrecognized by the system. So no First aid or formatting possible. I'm guessing the hard disk has given up but before purchasing a new one I want to rule out anything more serious like motherboard issues.
View 7 Replies View Related(i7 27" iMac/256GB SSD + 1TB of internal disk hard drive. (SATA/7200rpm/3.5"))The 1TB internal hard drive on my iMac failed the S.M.A.R.T. Utilities test so Apple called in the computer and I had to have the hard drive replaced. The technicians reloaded the system from a 1TB external Western Digital hard drive; I had backed up the everything on it using Time Machine.
Unfortunately, the iTunes application cannot now locate my iTunes library. I create a lot of slideshows on Aperture and use music from iTunes on the audio tracks. The titles on the audio tracks are now inaudible and are preceded by a yellow triangle with an exclamation mark inside.
how I should re-establish the original link between iTunes and its library. The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (declangreaney) on the 1TB of internal disk drive.In trying to solve the problem, I went through the folders and double clicked on one song. This opened iTunes so I highlighted and dragged all the other 'artist-named' folders on the iTunes interface and in doing so, I succeeded in accessing all the files.
Info:
iMac, Mac OS X (10.7.3), (i7 iMac/256GB SSD + 1TB Int. HD
I have a 1TB GTech GRaid external hard drive, which seems to have gone on the blink. When I start it up it spins into action but then following a small clicking sound winds back down again. It then spins up again, and then with a click winds back down again. This goes on and on and on. What is the best way of hooking up the internals of this drive directly to the Mac Pro? Or is there a better option to start the drive as it stands, without having to open it up?
View 3 Replies View RelatedI bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies View RelatedI am a pc guru but not so technical with the Macs. I have a Mini with really only iPhoto and iDVD data on it. I want to replace the 160g drive with a 320g drive and of course keep the data. There are 2 options I'd entertain for this backup/restore situation: 1)Figuring out how to export/save the iPhoto and iDVD stuff onto an external hard drive, install the the new drive, re-install all the software, and import the iPhoto and iDVD stuff. I would imagine this option, if possible, would be the easiest and likely fastest solution. Clone the 160g drive somewhere, install the 320g, and restore the clone to the new 320g. This option I am quite familiar with in the pc world by using Norton Ghost. The Mini was purchased in Aug 2007 (right after the refresh) so it's not the latest Mac OS. any tips or weblinks?
View 8 Replies View RelatedI recently bought a new hard drive for my 2006 MacBook but have run into nothing but problems while trying to restore my time machine backup onto it. Using my Leopard Family Pack disc, I was unable to format my drive successfully so I scheduled an appointment with the Genius Bar. When I went, the Genius used his USB hard drive to format the drive and install Leopard. While using that, he ran into no problems that I had run into while using my Leopard disc. So Leopard is installed and I go home to restore my backup and the backup fails (Migration Assistant and booting from Leopard Disc). So I schedule a second appointment and the Genius tells me there's no way he can attempt to restore my backup due to time restraints (which is understandable) and runs diagnostics on my hard drive and the time capsule's hard drive, finding no issues. He installs Leopard again on my new drive and I go home to run into the exact same problems I did last time. I don't know what to do, the Geniuses won't help me, and I can't find the answer on the internet. Here's a list of the things I have done and the errors I run into: Migration Assistant - after getting Leopard installed by the Geniuses at the Apple Store, I come home and run Migration Assistant with my Time Capsule attached via ethernet cable. Everything runs smoothly until one of the last steps (which says under a minute remaining) "Transferring support for applications". It just sits at that stage forever and I have read online about similar issues. I read online that somebody quit out of migration assistant at that point and everything was transferred over anyways. This isn't the case with mine, as over half of my dock was filled with question marks.
Restore backup from Leopard Family Pack disc - This is the disc I used to originally install Leopard on my Mac. When i boot from the disc, I choose English as the language and immediately following that I get the message "This software cannot be installed on this computer". This happened when I had a brand new unformatted hard drive so I used disk utility and when I tried to partition it, it failed. After the Apple Store guys formatted my drive and installed Leopard, and after Migration Assistant failed on me, I booted from my Leopard Family Pack again and got the same message so I know for a fact that it is not related to the hard drive. Restore backup from Snow Leopard UTD disc - a friend of mine got an UTD disc so I borrowed it to use on my brand new hard drive. It tells me that it requires Leopard to install but gives me the option to restore from a Time Machine backup. I choose my Time Capsule and then choose my backup that it finds. It continues to tell me that it is erasing the hard drive and at the point an error message pops up saying there was an error and to restart my computer. After doing so, my hard drive is no longer formatted correctly and I have to go to the Apple Store to get them to use their USB hard drive to format my hard drive and install Leopard (starting this whole process over again)
A client of ours left their Powerbook G4 here after deciding they did not want to fix the bad hard drive, and after holding it here for some time, they apparently want us to now get rid of it. It's been sitting here for sometime since then, and I'm the only one around who cares to adopt it. What exactly can I make of this thing? Our tech has let me know that it needs:
1) A power cord
2) An OS reinstallation (I have no CDs whatsoever)
3) More memory (I can get this)
4) Hard Drive (I can get this)
5) An overall anti-freakin-bacterial cleaning
Following my internal startup disk failure (System v. 10.5.8) on a G5 (mid-2004) I am trying to restore it from the Time Machine backup folder Backups.backupdb located on an external 1TB WD called Time Machine Backups also containing additional folders with other backups.
The internal startup now has only Sys. v.10.5. installed from Apples disk.
Using Leopards start-up disk to Restore System from Backup it finds the 1TB WD disk called Time Machine Backups. After clicking on continue the next window reads No Mac OSX System Backup Found.
The backup folder called Backups.backupdb begins on 5-13-09 with 7 day backup intervals to 7-30-09. The month of August only contains 4 backups. The month of September shows daily backups.
My Powerbook is all banged up. Anyway, the little needle-type thing in the power hole broke off so it's no longer operating. I have a bunch of eMacs and iMac G5s/Intels around the house.. Can the powerbook harddrive connect to them so I can restore some data or do I need to find another solution?
View 4 Replies View RelatedSo I've come to the realization that I need a bigger HD in my MB. I'm a little confused on how to go about doing it though. If I use Super duper and put a backup of my existing HD onto an external HD. How do I restore it after the new HD and clean install of SL is done? Do I just download the super duper app again and use it to restore from the external HD?
View 9 Replies View RelatedMy Macbook crashed recently and it just tells me to turn it off when I start it. I've exhausted all the recommended options in the manual (default settings, etc.) and unfortunately, I'm missing the first one of the Tiger installation/restoration discs . Is there any way I can access the files I need to back up using Carbon Copy Cloner on an external hard driver (which in this case would be an ipod)? It seems to think you can, but nothing on their web site seems especially clear in this. Also - I don't have access to a Mac right now, so presumably I won't be able to unpack the files the CCC DMG on Ubuntu or the ipod - not sure whether that matters or not.
View 1 Replies View Related1 broken mac, screen dead - may be able to access the hard drive, but with migration assistant I don't see (literally) how I can. Or can I? 1 External Hard drive, with what appears to be the entire contents of the old mac on it. I can't seem to find the applications I need to restore to new mac, and the Address book won't update, even when I trash the one on new computer, and load the old one. iBook G4 - both models same. word new when speaking of these macs not taken literally, I'm guessing 2004 models.
View 2 Replies View RelatedAs you may have read in other threads, I upgraded my hard drive today with plans to restore from Time Machine. I left for class with the restore on a screen that asked me to select which items I want to restore (everything). When I left, it said it was calculating the size of the transfer. The transfer button was grayed out. When I came back 6 hrs later, it was still calculating. What on earth is going on?
View 5 Replies View RelatedMy iMac wouldn't boot. All it would do is come up to a utility screen. So, I opted to restore from a backup (I use Time Machine that does backups to an external drive connected to the fire-wire port). I select the date of the backup that I wanted to restore and went to the next screen. When it got to the next screen where you needed to select a destination drive... it didn't find any in the system (there was no drive to select).
I assumed the hard drive died so I bought a new one. I put that in this evening and when I tried to boot the machine and restore from a backup to the new internal drive... the same thing happened. It did not recognize the new hard drive I just installed. I replaced a 500 GB Western Digital hard drive with a 1 TB Western Digital hard drive. Now I'm thinking the original hard drive is still good.
Info:
Apple Remote Desktop, Mac OS X (10.7.1)
