My iMac G5 is basically dead. Logic board failure. Apple is going to replace it by giving me a credit toward the purchase of a new iMac but that is a different story. I need to send my G5 back to them. Can I take the internal hard drive out and transfer the data to a PC and then get that data off the PC onto an external HD?
I was just wondering if anyone could help me with this. the iBook that I just inherited from my aunt, (She got a new MB) was working yesterday, whenever the power shut-off on it. (It has a power issue on the logic board, and if it comes unplugged it dies, even though it has a new battery.) so she went to work, and attempted to power it on, it came up, and the apple was on the screen, and the spinner came up, nad it spun for a very long time, eventually the screen flashed, and turned blue, and the spinner came again. After around 15 minutes, she was given the kernal panic screen. She held down the power button, and restarted, only to come up with the old finder face, and a question mark. I rush over with my disc's, and load up the disk utility. It was repairing the disk, and about 3/4 of the way through, it had an error. So, I rebooted, and we got an apple, and it repeated the previous situation, and gave the blue screen, followed by a kernel panic. This time I ran the hardware test, and it says that the logic board passed, but there was an issued with the harddrive.
At first disk utility could find the hard drive, and it reported it as being a 2 TB drive!!!!!!! So I got suspicous about that, and after the hardware test, the computer was reporting that there was no hard drive in the computer at all. we know for a fact that the drive was either 50, or 80Gb's, (90% sure 80) My question to you is: Is this the hard drive that has gone bad, or, is it the controller on the logicboard needing to be replaced?
The logic board on my powerbook (aluminum)G4 is fried. I would like to get the data off the drive, but would like to do it myself. Will the drive plug into an external carrier rig like any other drive? I have a granite digital external firewire drive caddy rig. I assume that the mini drive in the powerbook will not plug into an enclosure that was made for a regular drive? Are there any adapters for this sort of thing?
View 2 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
Have an early 20" iMac G5 and the Hard drive started to squeal and then crashed. Tested dive in another iMac and it is definitely bad. Installed new hard drive and the system fails to find it. Formatted it on the other iMac and reinstalled but it still is not seen by the system. Everything was running very well until the drive failure. Took it to an Apple approved store, paid the $60 to be told that the Mother Board was bad. It is hard for me to believe that a disk failure could cause a Mother board failure. 2- 20" iMacs, a 24" iMac, and a new 27" iMac (not yet out of the box.)
View 1 Replies View RelatedSo the cable that connects the hard drive to the logic board in my MacBook Pro (15" A1211 model) had the adhesive wear off and as a result, the tiny little hook broken off. Apple quoted me between $300 and $1250 (great range huh?) to fix it, in spite of that apparently useless little Apple Care warranty I paid $350 for and have never used. Sorry, kind of really annoyed right now. Anyway, I'm not paying that. I found a new connector for like $30. Has anyone had any luck reinstalling this part? Any tips or how-to's? Alternately, the hook is still there, and I've read forum posts about potentially soldering it back on, but there are no responses, so has anyone done that before? Any advice would be greatly appreciated.
Another issue is that my CD drive randomly stopped working. The guy told me something was probably just out of line, but they won't fix THAT because "there's a dent in the back of the computer." It's a tiny dent that has been there for over two years now, so...again, dumb. But I can't seem to get the screws off the optical drive to open it. Any suggestions for loosening really stuck screws?
2008 mac-book pro, started having these warning screens come up by which it states that i have to turn off/ restart ( only option as no other controls work). These became more frequent until yesterday i turned it off as per warning to then restart but now it wont turn on at all.
All that happens now is that when press the power button the fans come on for about 5-10 seconds and then it just all abruptly turns off, the screen stays blank and there is also no start up sound either.
MBP is not starting up or chiming - none of the resets work, been through that yesterday, not even getting to chime. I took the memory out of the MBP and it is running but having a loud bleep every few seconds. Does anyone know what this indicates? does this mean the logic board is ok but the hard drive is dead or could it still be the logic board? If this means the hard drive is dead then I could maybe buy a new one, if it means its the logic board I could recover my files from the hard drive via a hard drive enclosure.
View 6 Replies View RelatedMy primary MacBook is suddenly now powering up - Tried the power management reset....removing battery/power and attempting restart after 12 hours and so forth. Does this sound like Logic board? Is there a chance the HD data can be retrieved if it would be installed in another MacBook or...if Logic board is repaired?
View 2 Replies View RelatedFirst Mac Attack, must say I like working on these things, I'm working on a friends late 2004 ibook g4 that seems to boot up fine, but with lines across screen exactly like this one found in google images. Most of the info I've come across seems to point to a logic board failure, but also have seen posts relating to LCD failure. wondering if any here have encountered this and what eventually found was problem. This ibook is litterally on the verge of just being replaced anyway. I'm only working on it because It's a first, and believe the education is valuable.
View 1 Replies View Relatedi need some advice on what to do next, my Intel 24" iMac has failed, diagnosed as a faulty logic board by the Apple Genius. I purchased the iMac in Dec 07, and I deliberately did not purchase the extended warranty as this is a desktop unit, that in 20 months of ownership has never been moved, dropped or transported anywhere.
I have no option than to either pay for the repair - �380 or sell on eBay for spares...!
I informed Apple about the Sale of Goods Act, and they have put the owness on me to prove it was faulty from date of purchase...! They have informed me that I need to visit an Apple authorised service centre where they will run a test and produce a report, which will determine if the fault was there in the first 6 months of ownership.
I got a late 2008 MBP and recently my logic board got exchanged due to my graphic card failure. However, since the work is done, a very annoying problem occurred. When I put my hand on my palm rest (right side, the hard ware side), it sounds like I am squeezing the whole thing down and it will make some very wired noises. It sounds like cracking or sth. I bring it in apple store twice and they said they do not hear anything. Anybody have a idea about this issue? Thank you very much.
View 3 Replies View RelatedLaptop suffered wine spillage, now it won't boot up. Cleaned the logic board (+ gpu/cpu/heatsink) with isopropanol, rinsed with electronics cleaner (electrosolve), but still won't boot. There are some visible signs of oxidation, very very slight. Magsafe connector works, ac adapter light only comes on when connector is connected to motherboard. Also the motherboard gets slightly warm to touch when power is plugged in. When ac plugged in, the macbook won't start up. Couple of questions:
1) Anyone have a diagram of the a1181 logic board? (2.0ghz, core duo)
2) Anyone know how which pins to short on the keyboard connector to power up (in case the keyboard is the problem); remember reading it was the farthest left pins, can someone confirm?
To make the long story short, I am a careful computer user and I treat my computer like my baby since I am a college student studying Architecture and I spend more time and money on my computer than on books and there haven been 5 replacements on this mbp that I am using right now.
My 1st hard drive crash happened 3 weeks after I bought my mbp in April 2008. I got it replaced under warranty.
2nd hard drive crash happened little after 6 months............
i had a 2006 macbook core duo that ran really nice with snow leopard, recently the logic board died so it hasn't been used for a month, i got parts from my friend and now running a 1.83ghz core 2 duo logicboard in its place. the big problem what i think is the hard drive got corrupted due to the bad logic board, when i first put the hard drive back in it wouldn't boot except into safe mode and after i repaired permissions it would boot. however it still starts up slow and os performance seems sluggish and if i run disk utility it always has permissions to fix and takes forever.
View 6 Replies View RelatedBasically I believe my logic board to be fried, the evening before it was slow and then when I tried to turn it on the next morning the error message saying i need to restart it came up but it was not totally blue instead had what looked like black dead pixels everywhere. After this when I turn it on i get the power light and disk checking noise but nothing on screen its dead. I need whats on that Hard Drive but cant turn the computer on so any option? Are there any caddys out there? or any ways of this at all?
View 4 Replies View RelatedOK, so I did something truly stupid. I managed to splash water on my macbook. I hit a small cup of water (about 2 oz) with the end of the computer with the CD drive. It immediately shut off. The next day, I set it outside to dry in the sun and by midday, all was well. It functioned just as it always had. This continued through last night. This morning, when powering on, all I got was a white screen (no tone). After doing powering up while holding command-alt-r-t (a sequence I found on a help board), it will now make the tone, but maintains the white screen. I am slowly accepting that I am an idiot and the computer is probably a loss. Multiple internet searches have suggested it is either the logic board or the hard drive (at the very least). Any ideas?
My dad is a computer programmer, but does not use macs. He looked at it and just shook his head. I am very non-computer savvy (I know how to turn it on). He did say if it is the logic board I should be able to retrieve all of my (non backed up) files on the hard drive. He said he really doesn't think that it is the hard drive.I also am learning that it will probably be cheaper to replace than to repair. However, I am willing to try anything which might help.
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
A friend emailed last night saying he had a drive that had been 'acidentally formatted' (that's a lot of accidental mouse clicks if you ask me), that it took 2 seconds to format so it should have not actually wiped any data on there.
I've used Disk Warrior in other circumstances but never tried on an initialised drive. Nor would I know how to get a copy of such old software.
Does anyone have any ideas as to what software from that time might recover the data?
Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.
View 2 Replies View Relatedmy imac crashed last week but thankfully i had back up of all my files via my western digital my studio hard drive. thankfully right? well i royally screwed up and while trying to fix my crashed hard drive on my imac, i guess i accidentally reformatted my external drive, deleting EVERYTHING
I am pretty sure that I can go to a vendor and have them restore the HD correct? If so, what does something like that cost? I had probably 50 gigs lost, mostly photos, MP3, AVIs, and programs.
An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? I can not afford a data recovery service. Trying to do this on my own.
Info:
Mac Pro, Mac OS X (10.6.8), early 2008, 2 quad-core Intel Xeon
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
Our old Toshiba External Hard drive has failed ( approximately 3 years old ). It powers on and the blue light comes on, but the fans don't spin and you can't see it in the finder or on my computer ( we tried on both PC and Mac ).
Any ideas as to how I can retrieve the data... without going to a specialist and pay ���, or would that be the only option
My computer had frozen up so I had to restart it by holding down the power button. After I had done this, I kept getting a recurring kernel panic error. I had taken my MacBook the Apple Store and the tech who looked at it said that my hard drive was no longer good and that I would either have to replace it or purchase a new laptop. Regardless of whether I replace my hard drive or just purchase a new laptop, would there be any way to get my data that I lost off my old hard drive. I have some stuff backed up, but not recent data.
Info:
MacBook
so i've got a system with a fried c2d board. i can pick up a cd board for $150 plus shipping which is good for me. to find a comparable replacement, i'm looking at ~350 and i'm just not feelin that price as im on a budget.
i'm not concerned about the speed decrease as im just trying to get this thing rebuilt.
i understand that there are different heatsink assemblys..vertical vs horizontal. however, i do not know how to tell the difference and i am also unsure whether or not my c2d heatsink will work on this board i receive.
the logicboard possess a t7300 c2d and model # is 820-2279-a, it appears.
i cant find anything on that model, except for on ebay.
and i totally cant find the serial number on this macbook. under the battery on the tray has no serial number listed, and i've read through this documentation [URL]
My friends iBook hard drive has crashed and I'm in the process of replacing it. However, he had a lot of important data on that hard drive that he needs recovered. Is there any software that you can recommend (for Windows or OS X) that will recover data from corrupt/bad hard drives? I have software for NTFS/FAT32 but don't know of any good ones for HFS.
View 14 Replies View RelatedMy friend has a black Macbook that is extremely slow. It takes about 10 min. to boot up (literally), and when it does finally boot up, the good ol' beach ball comes up whenever I click on anything to do anything.
I then tried hooking up to a new iMac as a target drive. I was able to read some of the hard drive, but the User folder was empty, so I could not retrieve any of the data. Also, trying to access the target drive and trying to eject it made the new iMac slow way down.
And the hard drive was making a faint chirping sound, and then it turned into a crunching sound (much like that of the old 4200RPM hard drives of years ago).
I tried resetting the PRAM and also reset the power management. I also did a Safe Boot...all to no avail.
The DVD burner does not work. So, I could not do a hardware test or an archive and install. However, since the hard drive is most likely failing, an archive and install would not help any.
So, I'm guessing that the hard drive is going since the hard drives in Macbooks have been known to fail (it happened to a daughter of a friend of mine).
Is there a software out there that will allow me to retrieve the data from the drive? Trying to avoid having to go to a data recovery place.
I am using mac OS X 10.6, during the time to create a installation disk using disk utility by mistake I have selected my partition drive and after that I couldn't find any data in that drive, how to get it back data.
Info:
iMac, Mac OS X (10.6)
I had mounted my drive to a G5 tower and it was severely frozen and would not let me shut down. I forced the computer off while the drive was still running and now when I try to mount it it, every computer tells me that the drive I inserted is not readable, and it gives me the option to initialize, ignore, or eject. I don't want to lose any of that data, is there anyone that knows how to recover these files?
View 10 Replies View Related