OS X :: Fail USB Drivers Due To IPhone Jailbreak?
May 12, 2009
when my computer came back on the usb devises were working for about 10 seconds and then they all turned off. and every time i start my computer they dont work. it works before it boots into mac os though because i have to hold down alt to boot into macos as i have bootcamp on my mac. so at the mo i can only use my computer in windows mode.i am new to all of this modding stuff and i have no idea how to reset my usb drive or install firmware over it to get things working again and im struggling to find any answers online.
View 11 Replies
ADVERTISEMENT
Nov 6, 2009
i just updated, JB'd,and unlocked my 3g. my question is should i restore my backup?
this time around i had access to a att sim and have push notification working, will a backup restore mess that up?
are there any cons i may not be aware of associated with a backup/restore?
will it mess with any cydia apps installed BEFORE the backup/restore?
View 1 Replies
View Related
Oct 19, 2009
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
View 3 Replies
View Related
May 27, 2009
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
View 11 Replies
View Related
Oct 11, 2009
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
View 4 Replies
View Related
May 4, 2010
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
View 2 Replies
View Related
Sep 17, 2010
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
View 3 Replies
View Related
May 20, 2010
I boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies
View Related
Jul 8, 2009
I just got mine refurbished and it appears in perfect condition, and runs perfectly, but I have no idea whether the previous owner stressed it, in which case it may be more likely to break, or may break soon after my year is up. I don't really want to buy AppleCare, but I guess I might if it really is worth it.
View 24 Replies
View Related
Nov 23, 2009
Do the 128Gb MBP SSDs fail a lot? Have they failed on you...? Because I'm getting one in my MBP and I want to know if it might fail.
View 2 Replies
View Related
Feb 24, 2010
So i have a macbook pro 2.2Ghz with a 128Mb 8600 gt. The screen displays no video nor does an external monitor. However, i can connect to it thought screen sharing and it works fine. One weird thing though is that it in system profiler, it says the graphics card in a gma x3100 with 64Mb of ram. One other wierd thing is that it does not seem to even recognize its own lcd screen (see pic) One final thing, Will apple still fix it if the computer has been opened for an Hd replacement i made?
View 5 Replies
View Related
May 20, 2012
Sound from the USB ports on my Mac Pro (Early 2009) fail after a couple of seconds. Sound can still be heard from the Internal Speakers. I have replaced the USB speakers with several types and brands. Problem remains. I can get sound for several second then it quits and can not be restarted.
Info:
Mac Pro, Mac OS X (10.7.4)
View 5 Replies
View Related
Jun 20, 2012
I was trying to login QQ for Mac on my machine, but cannot. A message saying "Login time" was shown.As QQ is most popular instant chat tool in China, I really need QQ...
Info:Mac Desktop, Mac OS X (10.5.8)
View 4 Replies
View Related
Sep 7, 2014
I recently use facetime from Mac pro. it asked me to log in using my apple ID. I have log in with my apple ID. it show confirmed and after i choose next button it always kick me out and ask me to log in again. i have check on the troubleshooting and it suggest to check the timezone. my timezone is correct and i also use the latest OS X.
View 1 Replies
View Related
Aug 13, 2009
It does not start the backup process when scheduled time passed.
symptoms:
1.Example: TM says Next Backup: Today, 10:21 AM, the backup did not start, the time changed to the next bacup schedule time 11:20. No other message. When I look at the log, there are no activity at all.
2. I can request a backup "Backup Now", it backs up normaly. It updates the time for the next schedule backup.
3. For some unknow reason the TM may do a backup and schedule the next backup, but when the time due for the next backup, it will not start the job, it just reschedule the next back up time.
4. The TM disk icon will not stay as the blue time machine icon. It switch to the regular yellow disk icon.
View 9 Replies
View Related
Sep 1, 2010
currently i try to move all my files from old hitachi 250gb to new momentus via time machine , yet it fail after 6 percent. so i decide to do a fresh install of mac Os 10.6 but then it no responding at 27 minutes remaining . i try to use both DVD and external Hdd to install but still the same result . i tried to update the momentus Firmware via [URL] yet still same result?
View 4 Replies
View Related
Sep 13, 2010
I have a Mac OS X 10.6.4 installation on a Macbook Pro 5,1. I use two separate hard drives, one for Windows and the other for Mac. I accidentally switched from Windows to Mac with Windows in sleep mode. When I opened the computer, Windows resumed and BSoD'd. I panicked and forced the computer to shut down. It wouldn't boot into Windows, so I used my Snow Leopard install disk to attempt a repair. It didn't even finish. I tried a repair installation. It wouldn't install with the message "This disk cannot be modified." Disk Utility is telling me to back up and clean install. If there is a way to avoid this, what is it? And I don't have a backup; if there is no way of repairing my installation how do I back up my files?
View 4 Replies
View Related
May 19, 2009
I reinstalled my OSX a few days ago and it's back to 10.5.2. After running software update, it has Mac OSX Update Combine (737MB in size). So I clicked install per usual. However, after I finished downloading the file and it offered to restart and install, the installation failed. Meaning during installation, it stops 1/8 of the whole "installation bar" for 8 hours or so and it didn't budge a bit ever since. I'm not sure what to do now. Should I try to download the combo update from Apple website (729MB in size, not sure why the one in software update version is bigger in size) instead? And try to install that one instead?
View 5 Replies
View Related
Jun 4, 2009
Well the lady I talked to at Apple apparently didn't know what she was talking about, and after 3 attempts to install Leopard onto my ibook 4g. I discovered that the laptop does not come with enough RAM to install it. So, since it was never installed, but obviously has been opened.. is it going to be hard to try and return it?
View 7 Replies
View Related
Oct 13, 2009
I bought my mac book about 16 months ago. It doesnt power on, and its been determined logic board is issue.
View 13 Replies
View Related
Jan 22, 2010
my imac boots normally unless three things happen prior to it
1. i put the computer to sleep
2. i schedule a shut down via energy save
3. my computer undergoes a forced shutdown e.g. via power button or power failure
if any of these occur i get the infamous flashing question mark, however if i wait 30 mins it boots normally again, is there a reason for these problems other than a failing HD and can i do anything about it
f.y.i. i have already attempted clean/fresh installs of leopard and snow leopard
View 1 Replies
View Related
May 31, 2010
I just turned on my 20-day old 17" MacBook Pro Unibody and nothing happens other than a LONG boot sequence. The Finder isn't even indicated as running in the dock, and the only thin the conputer is capable of is opening a few select windows. Every time I attempt to run an app, I get the following warning: You can't Open the Application (null) because it may be damaged or incomplete. That's all the computer can do. I tried to launch Onyx to clean out the baffels, but it just won't launch. The computer only shuts down or restarts by holding the power key down.
View 1 Replies
View Related
Jun 15, 2010
I have had this problem for quite a while now and not just in safari 5. When I have multiple tabs or just one and click it and drag it off the tabs bar to make it become a window everytime i let go it becomes a window but everything is messed up. the edges around the window and the top of it. It looks like it is overlapping or something. This was the last straw for me, not fixing it with 10.6.4. I have no idea if this is a widespread issue, but does anyone know how to fix it?
View 6 Replies
View Related
Jan 20, 2009
So I have my Leopard DVD installer that I want to put on my iBook, but I can't, for many reasons.
1. My built in Combo Drive won't recognize the installer DVD, so I can't install that way.
2. The only drive I have that will recognize the DVD is a external USB DVDRW drive, and after lots of research, I am already well aware that you cannot boot a G4 (let alone any PPC) from USB.
So what can I do? Can I burn some sort of image to a CDR that will let me boot from my USB drive? I read about modifying firmware so a G5 will boot from USB, but I'm not sure if this will work. I mean, in a worse case scenario I can go out and buy a firewire cable and boot in Firewire Target Disk off a friend's Mac, but I'd like a simpler solution if possible.
View 4 Replies
View Related
Nov 28, 2009
I'm a windows system administrator at heart, and was never trained in OS X Server, and therefore I only know the obvious and what I've picked up.
all connect to an unlimited client Mac Pro as well as a Server 2003 active directory.
My problem is the 30 20" iMac's. When they work they're great, when they don't they're a total pain in the arse.
View 2 Replies
View Related
Mar 7, 2012
Just updated to iTunes 10.6 and iOS 5.1 on iPhone 4S.Despite repeated attempts, including turning "sync over wi-fi" off, sync fails to start.
Info:
Mac Pro, Mac OS X (10.7.3), MacBook Pro, iPhone 4S
View 7 Replies
View Related
May 26, 2012
When OS X 10.7.3 came out I tried to install it and it got to "Moving files in place" at 95 or 99 % of completion and hadn't completed 9 hours later. I forced the system to shutdown and restored through Time Machine, but wasted a lot of time working on this. Consequently I declined all further requests to update to 10.7.3. Today I was prompted to upgrade to 10.7.4, this was probably the third or fourth time I'd been prompted, so I accepted it and started the install. At 95% while "Moving files in place" again the upgrade hung and after giving it a couple of hours with further progress I again forced a shutdown and ran disk utility to repair the disk, just in case there was a problem with it, and then again restored it with Time Machine.
Info:
MacBookPro, Mac OS X (10.7.2), Early 2011 MacBook Pro
View 4 Replies
View Related
Jun 11, 2012
Some days ago I went to upgrade my mac mini 2010.I downloaded the combo-updater, as this is my preference. I sometimes have trouble with the normal updater from software update.When running the install I get this message of error above. I tried doing it different ways, downloaded the updater numerous times to try again.I even REINSTALLED OS Lion from the original installer and started over with the same result, even allowing the installer to dl the update, as it asked to do so.So I completely started over with a clean re-partitioned drive and had the same result. I tethered it to my macbook pro 2010 in FIREWIRE TARGET mode and tried installing it that way, same result. I have also just let the Software Updater utility run and allow it to install the downladed update. That activity returns a "cannot expan" error message...End result: It will not for any reason install this update. This is a problem I have never encountered (in 25 years of using macs).
Info:
Mac mini, Mac OS X (10.7)
View 1 Replies
View Related
Jun 19, 2012
ok, so i have a black macbook. im not sure what year, maybe 08 or 09. at first i tried installing lion via usb. i installed it onto a 8gb flash drive, inserted it into the computer, botted up, held the option key, and EFI Boot option appears. i click on it and i get the circle slash symbol. so i tried installing it onto a dvd and no luck. same result. I've done this several times before with other computers and its worked fine.
Info:MacBook
View 1 Replies
View Related
Jun 30, 2012
My 8 month old Macbook Air power adapter seems to have failed. It may appear to work (amber light glows when plugged in) for a while, but it stops working soon after.
Info:MacBook Air (13-INCH, MID 2011)
View 1 Replies
View Related
