MacBook :: Repairing Disk With Another Installation Disk?
Jun 30, 2014
My startup disk is almost full so I tried to repair disk in Disk Utility but only 'verify disk' was available, which led to the following error message: "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk." I have recently moved countries and cannot seem to find my installation disk anywhere (stupid, I know). Is there another option, such as using someone else's installation disk (since nothing is actually installed from the installation disk in this process, right?) or does it have to be my own installation disk? It is an old MacBook (2007), running OSX 10.6.3.
View 5 Replies
ADVERTISEMENT
Jun 26, 2012
I just got my computer yesterday and when running the "repair disk" function, I already get an error! Since I used migration assistant to move everything off my old mac to my new mac, I'm not interested in reinstalling the whole OS and transffering all my files again. This is a new computer, and shouldn't have this problem this early. I also get the same result when starting up in the recovery partition. How do I resolve this?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 4, 2014
Disk Utility when I run verify says I need to reboot from the Repair Disk. I tried (twice) and it shows no problems. When I reboot normally, and run DU, I get the same error. Which result should I believe?? And is there a workaround? Using 10.10.1 / Air late 2011.
Info:
MacBook Air (13-inch Mid 2011), OS X Yosemite (10.10.1)
View 8 Replies
View Related
Jun 19, 2012
We recently purchased a MacBook Air for a family member. She was using an old MacBook with Snow Leopard. Tried Migration Assistant, but after running overnight, the process hung with "less than a minute remaining." After waiting several hours, we decided to shut down both computers and start over. MacBook Air started up fine, and we were able to migrate from a Time Machine backup. No problems there. The old MacBook was greatly affected. The computer will not start up. The grey screen with the progress bar shows up on boot, but never moves beyond the spinning process circle. I tried booting from the OS install disk to use disk utility to repair it... but the machine seems to not accept the DVD and ejects it.
The only mode that I can boot into is single-user mode. I have tried using fsck to repair the disk, but even after many repeated attempts, it exits with "The volume could not be repaired." I think that this is an issue with the B-tree, which must have been damaged during the improper shut down during the migration. Are there any other options for recovering the computer? Again, this will not boot from the install disk, and the only mode that I can seem to access is single-user mode.
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Nov 18, 2010
I am running snow leopard, have 8 GB RAM and 320GB hard drive
I've had the computer 5 months, and today randomly decided to "repair disk permissions" on disk utility.
Estimated time remaining is 32 mins. So far there is already a huge list of details, mostly things that are supposed to be set at 95 or 1 but are set to 0 (not sure what this means).
Is it supposed to take this long? What exactly is it fixing, and how did these problems arise from simple regular use? Will I notice a difference in my computer's speed afterwords?
View 2 Replies
View Related
Jul 9, 2009
How can I download/install OS 9 Disk drivers for an already formatted hard drive?I was not able to exercise the "include OS 9 drivers" in the Disk Utility formatting process on a LaCie Drive because I needed to have also a 32GB partition for Windows-FAT, and when I chose the Windows-FAT format option, the "Include OS 9 driver option" disappeared from Disk Utility Program. The consequence of this is: my OSX main partition is not visible by my other Mac running OS-9, while my MS-32GB is normal. The main partition was formatted with HFS+ but with no "include OS 9 disk drivers" possibility.
View 7 Replies
View Related
Dec 25, 2010
I tried to repair my HD but it said that I needed to boot from my install disc and repair then using disk utility. If I boot from the Snow Leopard install disc and then repair my HD, am I going to have to re-install Snow Leopard?
View 3 Replies
View Related
Feb 2, 2009
when repairing permissions what in disk utility app. do you pick . I usually only repair the mac HD . Should there be any others ?
View 1 Replies
View Related
Dec 16, 2009
I've been having some real odd things going on with Snow Leopard. I thought that repairing permissions and repairing the disk may help. I ran the tests, but there are errors that look like they cannot be fixed. Below I posted the log file from Disk Utility:
Code:
2009-12-16 15:44:25 -0700: Disk Utility started.
2009-12-16 15:45:12 -0700: Repairing permissions for "Macintosh HD"
2009-12-16 15:46:43 -0700: Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x .
2009-12-16 15:46:43 -0700: Repaired "usr/share/derby".
2009-12-16 15:47:09 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
2009-12-16 15:48:55 -0700:
2009-12-16 15:48:55 -0700: Permissions repair complete
2009-12-16 15:48:55 -0700:
What I should do since Disk Utility won't repair the problem?
View 4 Replies
View Related
Nov 16, 2008
After reading on the internet that you should repair disk permissions around once a month or something I decided to do it after not doing it for ages, so I go and do it, then shut it off and leave it for a bit, and then when I turn it on I open Safari and I notice that its taking a really long time to load Apple's Start Page, so I think nothing of it and turn it off again, then a bit later I turn on and I find the internet on it still just as slow.
So I am wondering if its cause I did it or because of my router.
View 1 Replies
View Related
Nov 10, 2009
I bought this G5 with consistant startup problems but after replacing the hard drive,installing a fresh operating system, re-seating the ram, checking the Pram battery, etc, it was running fine. I now realize that when trying to repair the disk permissions, the same list keeps coming back even though it shows it's been repaired. Also, occasionally it may freeze or go into kernal panic on startup. If the hard drive is new, does it sound like a possible hardware problem? Does repairing disk permissions involve anything hardware?
Powermac G5 2 GHz
500G HD
4.5 G memory
View 1 Replies
View Related
Apr 26, 2012
I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?
Info:
iMac, Mac OS X (10.7.1)
View 1 Replies
View Related
Jun 29, 2012
Is it better to boot in Safe Mode in Lion to repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
View 12 Replies
View Related
Mar 27, 2012
I ran disk utility today and received a message stating: "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc) and then use Disk Utility to repair this disk. I check the box my mid 2010 MacBook Pro came in and there is no disk. I am currently running OS X 10.6.8. I have tried searching online to find instructions for creating or downloading a Mac OS X installation disk, but my search has not been successful. How do I create or where can I download the correct Mac OS X installation disk so that I can make the repair?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
View 4 Replies
View Related
May 13, 2010
Right, my macbook won't boot so i brought a copy of the SL disk from Apple. Put cd in went through to the click continue screen and clicked the Utilities and then Disk Utility and chose my drive and clicked 'Veriy Disk' Clicked that and it said it needed to be repaired and click the 'Repair Disk' button. Done that and it gets through some of it then spits up and error message saying the disk cannot be repaired.
I really need my stuff off of there becuase have'nt got a back-up so if someone could at least tell me how to recover my things i would be really greatful.
View 3 Replies
View Related
Jun 22, 2014
I've installed an ssd in my 2010 MBP and now need to install OS X 10.6 from original installation disk (my hd was accidentally wiped and I've only a limited back-up). Mac has started fine and I've DU open, but am now a bit lost. get the ssd and OS up and running?
View 1 Replies
View Related
Feb 28, 2008
I get the message "Please insert "Null" disk to continue InstallationI am trying to install Microsoft Word 08, and the host computer is a PC with its firewall off
View 2 Replies
View Related
Jan 22, 2010
Here's the deal: I have the most recent 17" UMBP, purchased last August, 2009 and got the Snow Leopard Up To Date Disk, did an install on my stock Hard Drive and have been VERY happy with everything for the past few months.
But... All these threads championing the latest Intel SSD G2 have finally gotten to me and, I just purchased the 80GB model from Newegg. It should be here tomorrow.
Now, I ask that you confirm, a specific question about installation from my UTD disk and then advise.
note that I've searched a ton about this subject. It's been answered in so many conflicting ways, I'm running it by you guys once again.
So then, it seems that I can NOT install Snow Leopard from my UTD disk onto the new, fresh Intel SSD installed into my 17" UMBP. This is the case, yes?
A workaround, I figure, would be to install Leopard 10.5 onto the new SSD and then to a clean and erase and then instal of 10.6 on top. I assume the UTD will read 10.5 and let the upgrade proceed.
So, finally, a question: Should I be worried about installing a total of two OSs given that I (cheaply!) opted for the smaller 80GB SSD and that 10.6 doesn't support TRIM?
View 13 Replies
View Related
Apr 25, 2010
I have a question about installing an OS to try on a USB hard disk. If I place the ISO on this drive and boot to it, and continue on with the install process, where will it install to? This is important because I do not want to lose all of my Mac files.
View 6 Replies
View Related
Oct 27, 2010
I work in Tech Services at my University, and I've been presented with this issue multiple times at work. I think my entire group of co-workers have just been living with the precedent, a notion that I think is entirely false. Here's an example of the situation:
A student comes in with a non-working MacBook, vintage 2006, say. Something's wrong with the OS itself.. the student probably deleted /etc or something, not knowing what it was. Regardless, the computer is effectively borked and a reinstallation of Mac OS X is in order. My co-workers, and even my boss, tell me that I need to have _their_ disk to perform the reinstallation.
I think that's wrong. Mac OS X installation disks are now all the same. Newer ones might have newer drivers for newer machines, but outside of that, so long as a person has a license to that version of Mac OS X which was on their computer, they can use whatever media they like. If they own a Mac, they have a license already to the version it came installed with.
I don't believe there is any breach of license or copyright here by simply having our own archive of installation media for Macs, so long as we install the same version that corresponds with their computer's default setup.
I do realize that doing this will lose their iLife installation and any other third-party software that they had their computer configured with, but I can say personally that I'd be more glad to have a working computer and no Office than a non-working computer and Office.
Anyone have some thoughts? I'd like someone with more IP/legal knowledge to share their thoughts.
View 4 Replies
View Related
Sep 20, 2009
I have a Macbook Air and I want to install Windows 7 in boot camp. however since I have a 128 SSD I definitely want to minimize the disk space it uses. I installed it on an imac and it took 14 Gigs!
Is there any way to do what we can do in OS X, remove print drivers etc? I couldn't see any option during the installation on the imac.
Dont like to allocate 24 gig for Windows since I need some space for any applications as well.
View 1 Replies
View Related
Nov 15, 2009
My problem is that when I try to boot to the XP installation disk, I get the very fast, flashing, gray apple, followed by a question mark folder, followed by the ghostbuster symbol, without the ghost.
The disc keeps spinning, but the windows installation screen never appears.
I'm new to installing windows with boot camp.
Anybody know what I'm doing wrong?
View 1 Replies
View Related
Apr 19, 2012
I'm trying to recapture/repair my Entourage database on G4 Powerbook running 10.5.8. I've booted from the Leopard installation DVD, but when I try to "repair disk" Disk Utility says the disk cannot be unmounted.
Let me backtrack: I've run verify permissions and repair permissions.
When I run "verify disk" I could a couple of red-letter notaions
-- Invalid Extent Entry
-- Invalid Extent Entry
-- Incorrced number of file hard links
and then the conclusion:
-- Fileystem verify or repair failed.
Info:
PowerBook, Mac OS X (10.5.8), G$ 17"
View 14 Replies
View Related
Jun 14, 2012
during installation start up disk cannot be found
Info:
Mac mini, Mac OS X (10.0.x)
View 1 Replies
View Related
Jun 24, 2012
I received my 2006-2008 mac mini from a friend. I don't know exactly what year it is to be exact. It was a school computer that was givin yo him an now i have it. I want to wipe it completely clean and start over from the way it was right out of the box but I do not have the installation disk. How can i get a duplicate copy A.S.A.P and how much will it cost with shipping and all.
Info:
Mac mini, Mac OS X (10.7.4)
View 12 Replies
View Related
Feb 24, 2010
I have an Intel Mac Mini running OS X Snow Leopard, the problem is since last November, I've had to use Disk Utility and my Snow Leopard Installation disk to repair my volume because of Permission problems, at least 3-4 times. And I know I shouldn't have to do this!
View 1 Replies
View Related
Aug 18, 2009
So my mom just bought an iMac from her friend's mother, and I'm trying to restore it to factory settings using the Installation disks that came with my MacBook Pro. I just inserted the discs and clicked "Install Mac OS X" and then it gives me a "Restart" button, but I cannot restart it without putting in the Password which I do not have. Is there another way to do this?
View 4 Replies
View Related
Sep 10, 2009
I'm trying to help a friend fix his MacBook (white plastic) which has the folder with the question mark issue. I figured I'd do a clean install of Leopard but when the installation disk boots, it says it cannot detect Tiger which is necessary for the upgrade. I tried erasing the partition, but it gives me an error and stops the operation.
View 3 Replies
View Related
May 26, 2012
Is there a way to reset the login password without the installation disk? Or is there a way to get a disk sent to me? I don't have mine anymore. I'm using OS X Lion v10.7
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
View 2 Replies
View Related
Aug 25, 2009
I purchased a copy of SL that I want to install on my MBA. I know that Leopard can be installed using the remote disk feature since my MBA doesn't have a DVD drive. problem is that I can't find anywhere saying that SL will support that function. Although I did see that the minimum system requirements require a DVD drive, but it doesn't say anything about a remote drive.
I'm sure it would be stupid if it wasn't supported, but then again you can't installed XP without the SuperDrive.
View 6 Replies
View Related
