OS X :: Very Slow Internet After Repairing Disk Permissions?
Nov 16, 2008
After reading on the internet that you should repair disk permissions around once a month or something I decided to do it after not doing it for ages, so I go and do it, then shut it off and leave it for a bit, and then when I turn it on I open Safari and I notice that its taking a really long time to load Apple's Start Page, so I think nothing of it and turn it off again, then a bit later I turn on and I find the internet on it still just as slow.
So I am wondering if its cause I did it or because of my router.
View 1 Replies
ADVERTISEMENT
Feb 2, 2009
when repairing permissions what in disk utility app. do you pick . I usually only repair the mac HD . Should there be any others ?
View 1 Replies
View Related
Dec 16, 2009
I've been having some real odd things going on with Snow Leopard. I thought that repairing permissions and repairing the disk may help. I ran the tests, but there are errors that look like they cannot be fixed. Below I posted the log file from Disk Utility:
Code:
2009-12-16 15:44:25 -0700: Disk Utility started.
2009-12-16 15:45:12 -0700: Repairing permissions for "Macintosh HD"
2009-12-16 15:46:43 -0700: Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x .
2009-12-16 15:46:43 -0700: Repaired "usr/share/derby".
2009-12-16 15:47:09 -0700: Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
2009-12-16 15:48:55 -0700:
2009-12-16 15:48:55 -0700: Permissions repair complete
2009-12-16 15:48:55 -0700:
What I should do since Disk Utility won't repair the problem?
View 4 Replies
View Related
Nov 10, 2009
I bought this G5 with consistant startup problems but after replacing the hard drive,installing a fresh operating system, re-seating the ram, checking the Pram battery, etc, it was running fine. I now realize that when trying to repair the disk permissions, the same list keeps coming back even though it shows it's been repaired. Also, occasionally it may freeze or go into kernal panic on startup. If the hard drive is new, does it sound like a possible hardware problem? Does repairing disk permissions involve anything hardware?
Powermac G5 2 GHz
500G HD
4.5 G memory
View 1 Replies
View Related
Nov 18, 2010
I am running snow leopard, have 8 GB RAM and 320GB hard drive
I've had the computer 5 months, and today randomly decided to "repair disk permissions" on disk utility.
Estimated time remaining is 32 mins. So far there is already a huge list of details, mostly things that are supposed to be set at 95 or 1 but are set to 0 (not sure what this means).
Is it supposed to take this long? What exactly is it fixing, and how did these problems arise from simple regular use? Will I notice a difference in my computer's speed afterwords?
View 2 Replies
View Related
Apr 26, 2012
I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?
Info:
iMac, Mac OS X (10.7.1)
View 1 Replies
View Related
Jun 29, 2012
Is it better to boot in Safe Mode in Lion to repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
View 12 Replies
View Related
Oct 26, 2007
I am getting this when repairing permissions : "Warning: SUID file System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired."
Doesn't look like permissions get fixed.
What can I do?
View 24 Replies
View Related
Mar 29, 2009
Using OS X 10.5.6
When running Repair Permissions in Disk Utility, it reports that there are errors and that it's fixed them but if I run it again, the same errors keep appearing.
I've noticed that the current permissions on the errors are lrw-rw-rw- which I assume means that they are symbolic links and not the actual files which Disk Utility is expecting. Any idea what's going on?
View 3 Replies
View Related
Nov 20, 2010
I have a an old G4 running Mac 10.3.5 that I need to update to 10.3.9 to run a program. The machine has a long boot time so I'm worried it might die soon.
Anyways I am wondering if I should click "repair permissions" and/or "verify permissions" before I do the 10.3.9 combo update. Will this increase the chances that the 10.3.9 update will not cause problems? Or can repairing permissions itself cause trouble?
I have never repaired or verified permissions on this machine.
View 7 Replies
View Related
May 17, 2012
I have a 1.8Ghz G5 (2.5Gb RAM) PowerMac here, running Leopard 10.5.8, which is used as a file server. The drives aren't RAIDed or anything. I am going to add a 2nd internal drive to it, and as a maintenance I decided to repair pemrissions before shutting it down.However, when I ran Disk Utility, I found that I cound't repair permissions at all. I could select the drive, click the botton, and the progression bar would go to the 'striped barber pole' effect that comes up as it is preparing to do something, but then it just stays there. I can cancel it, but no repairs happen.Any ideas how to get this to work or should I just use a 3rd party solution like Leopard Cache Cleaner? I'm not sure whether other software would just come up against the same issue.
Info:
iMac, Mac OS X (10.7.3), 2.5 Ghz Intel i5, 4Gb RAM (work)
View 1 Replies
View Related
Sep 4, 2009
I am running a MacBook 2.4GHz Intel Core Duo, 4GB SDRAM on Snow Leopard 10.6 and when repairing permissions, I get this message: Warning SUID 'system/library/core services/remote management/ ARDAgent app/contents/ Mac OS/ ARDAgent' has been modified and will not be repaired.
View 1 Replies
View Related
Mar 21, 2009
Ok, so I go to repair permissions and I get these files repaired. So, 10 minutes later I did repair permissions again (I had a hunch), and the same EXACT files get repaired.
And this happens everytime. I don't even do anything in between the repairs (I don't launch new apps or even move my mouse).
Is this normal because I never had this happen before on my Mac?
View 6 Replies
View Related
Apr 1, 2009
Lately I've noticed that when I repair permissions, it's the same files that keep appearing the log of files being "repaired"... which leads me to believe they're not actually being repaired at all.
It's at the point where I can repair permissions once, generating a log of repaired files, and then if I repair permissions again immediately afterwards (whether I've closed and reopened Disk Utility in the mean time or not), the same exact list of files appears as being repaired.
View 2 Replies
View Related
Mar 30, 2010
To repair permissions I just click a little "Repair Permissions" button. Don't know why nor what it actually does, but I understand that I should do it from time to time.
But if it's so important, why doesn't OS X just do it automatically?
View 11 Replies
View Related
May 17, 2012
I am trying to figure out why my early 2008 macbook pro is lagging. I tried to repair disc permissions but it always repairs the same ones. The other thought I had was that the video card may be on its way out, but not sure how to check that.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 10, 2014
Is it ok to browse while your mac is repairing permissions?
View 5 Replies
View Related
Jun 27, 2009
I am repairing permissions and it has been 3 hours! Is something wrong?
I have had it take an hour before but this is making me nervous. It is however making that ticking clicking sound. What should I do?
View 8 Replies
View Related
Jun 10, 2008
I recently ran Disk Utility on my MacBook (OS 10.4.11), and it said the node structure was invalid. The next day, I repaired the disk with DiskWarrior (I didn't have an OS X disk around, so I couldn't use Disk Utility).
However! Before I tried using DiskWarrior, I repaired permissions in Disk Utility, figuring that it was good routine maintenance. Disk Utility changed some permissions, and ever since, the Finder immediately quits and restarts when I navigate to certain folders. The "bad folders" seem to vary with no apparent cause: for a while it only cared about a certain folder inside my home folder, but now it's started to quit whenever I navigate to my home folder (which means I can't use Command-N, though I can make new windows by clicking on the hard drive's desktop icon). Occasionally it lets me go to my home folder for no apparent reason, and sometimes I can get to otherwise "bad" folders by clicking on my shortcuts on the leftmost panel of the finder window (though not always). In short, it's not very consistent, and changes over time. It's still doing this even after repairing the disk, zapping PRAM, and trying fsck (which said the disk was OK). Both Disk Utility and DiskWarrior think my permissions are fine.
View 2 Replies
View Related
Aug 3, 2010
What does everyone mean when they say this?
What does it do?
Basically, all the general information about it.. I've been reading people's problems and I see this all the time, and I'm totally confused on what it.
Also, what is PRAM? What does resetting it do?
View 2 Replies
View Related
Apr 23, 2012
I am concerned about my MacBook Pro that I am running Lion on... recently I had to force quit the finder. Everything seemed to check out using TechTool Pro 6. Repairing permissions takes a very long time.
Info:
iMac, MacBook Pro, Mac OS X (10.6.1)
View 3 Replies
View Related
Jun 26, 2012
I just got my computer yesterday and when running the "repair disk" function, I already get an error! Since I used migration assistant to move everything off my old mac to my new mac, I'm not interested in reinstalling the whole OS and transffering all my files again. This is a new computer, and shouldn't have this problem this early. I also get the same result when starting up in the recovery partition. How do I resolve this?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
View 2 Replies
View Related
Dec 4, 2014
Disk Utility when I run verify says I need to reboot from the Repair Disk. I tried (twice) and it shows no problems. When I reboot normally, and run DU, I get the same error. Which result should I believe?? And is there a workaround? Using 10.10.1 / Air late 2011.
Info:
MacBook Air (13-inch Mid 2011), OS X Yosemite (10.10.1)
View 8 Replies
View Related
Jun 30, 2014
My startup disk is almost full so I tried to repair disk in Disk Utility but only 'verify disk' was available, which led to the following error message: "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk." I have recently moved countries and cannot seem to find my installation disk anywhere (stupid, I know). Is there another option, such as using someone else's installation disk (since nothing is actually installed from the installation disk in this process, right?) or does it have to be my own installation disk? It is an old MacBook (2007), running OSX 10.6.3.
View 5 Replies
View Related
Dec 23, 2009
I'm seeing this show up when I do a permissions repair in Snow Leopard 10.6.2
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x
Repaired "usr/share/derby"
It shows up each time I do this. Anyone else seeing this?
View 2 Replies
View Related
Jun 22, 2012
My iMac is currently being booted from external disk via Firewire 800. I have to do this until I receive new install disks from apple to resore my machine.
The computer is usable, however internet is very slow... I have other devides, windows machine, ipad, iphone and they all run okay.
It seems that because I have booted via the external disk..... internet is slow. Could this be as the OS is needed to refer to the external disk?
Info:
iMac, Mac OS X (10.6.8)
View 4 Replies
View Related
Jun 2, 2012
Disk Utility says there are a bunch of disk permissions that need repairing. I hit repair and disk utility says that it repaired those disk permissions. But when I verify, it says they still need to be repaired.
Info:
Mini 2.4Ghz, Mac OS X (10.6.8)
View 1 Replies
View Related
Dec 25, 2010
I tried to repair my HD but it said that I needed to boot from my install disc and repair then using disk utility. If I boot from the Snow Leopard install disc and then repair my HD, am I going to have to re-install Snow Leopard?
View 3 Replies
View Related
Jun 19, 2012
We recently purchased a MacBook Air for a family member. She was using an old MacBook with Snow Leopard. Tried Migration Assistant, but after running overnight, the process hung with "less than a minute remaining." After waiting several hours, we decided to shut down both computers and start over. MacBook Air started up fine, and we were able to migrate from a Time Machine backup. No problems there. The old MacBook was greatly affected. The computer will not start up. The grey screen with the progress bar shows up on boot, but never moves beyond the spinning process circle. I tried booting from the OS install disk to use disk utility to repair it... but the machine seems to not accept the DVD and ejects it.Â
The only mode that I can boot into is single-user mode. I have tried using fsck to repair the disk, but even after many repeated attempts, it exits with "The volume could not be repaired." I think that this is an issue with the B-tree, which must have been damaged during the improper shut down during the migration. Are there any other options for recovering the computer? Again, this will not boot from the install disk, and the only mode that I can seem to access is single-user mode.Â
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 12, 2012
I am having problems with my Mac running slow. I had a friend guide me to run a "repair disk permission".I did that but I am not sure if I am to click clear history.Also should I do anything else to help my Mac run better?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
