I have Windows installed on my MacBook. A few days ago. My MacBook showed a black screen . I plugged it into my charger and it works fine, once I unplugged it shows that the computer is on but shows a black screen. Another issue is that only windows is working. I cannot even logon to OS
Info:
MacBook Pro
is it okay to leave my charger plugged into the wall socket on all the time? Even when im not charging my MPB? I have this strange fear that the charger will die on me faster if i leave it plugged in all the time.
View 4 Replies View RelatedI have an early 2008 Macbook and it's been running pretty good up until this afternoon. Now I'm having what is apparently not all that uncommon a problem, where my laptop will only remain turned on for as long as my laptop is plugged in. The second I remove the charger it turns off, and it won't turn back on again until I plug the charger in again. I had bought a replacement battery not all that long ago so I'm not sure if that would be the issue. It could be related that last night I installed more RAM into my laptop. I say could be because I was using the laptop NOT plugged in for the rest of the night and most of the this morning without any problems. It wasn't until this afternoon when I started using my laptop again that the problem arose. Could this be a delayed reaction to the RAM installation or is it just a coincidence and there's a problem with my battery?Â
Here's the info from System Profiler:
Battery Information: Model Information: Manufacturer: SMP Device name:ASMB016 Pack Lot Code: 0000 PCB Lot Code: 0000 Firmware Version: 0110 Hardware Revision: 0200 Cell Revision: 0102 Charge Information: Charge remaining (mAh): 4898 Fully charged: No Charging: Yes Full charge capacity (mAh): 4926 Health Information: Cycle count: 282 Condition: Normal Battery Installed: Yes Amperage (mA): 2123 Voltage (mV):  12198Â
I accidentally left it on while I was doing some chores. When I came back it was dead (no battery). So I plugged in the charger and it immediately turned bright green when its supposed to be orange first, right? MacBook says (Not Charging) but power source: power adapter, green light is on, on the Magsafe. It's running by the power source because the battery is at 0%. I've had the charger plugged in for less than/about an hour and the 0% still hasn't changed. (Not Charging) is still there too. I bought my Macbook last August 2009, so it's not even a year old.
View 9 Replies View RelatedI purchased a MacBook a couple of days ago and it has been fine. However, today I've realised that the back of it at the bottom is getting really hot, even when the charger is not plugged in. I am not using powerful apps either.Sometimes it can almost be too hot to touch for more than a couple of seconds. This happens on any surface, whether it's on my wooden desk or not.
The back getting hot also heats up the rest of the Mac to some extent. does it need seeing to and if so will I be charged?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have been using my MacBook pro for a lot of film editing and motion graphics. Recently, I noticed that my battery kept going down, even when charging. I thought nothing on it and kept using it. After around 4 hours, the battery went from 90% to 23% WHILE plugged in. This got me nervous. When I plug in the MagSafe charger, the light comes on and I get the "charging" symbol in my toolbar. The light turns orange and then, after a few minutes, the power starts to go down instead of up.Â
The laptop does charge, but only when I am running no application, when the screen is shut or when the laptop is powered off. Bear in mind that right now, I am on Firefox, that is the only application open, yet the charge is still going down. I assumed it was because I was using Premiere CS6, After Effects CS6 and Cinema4D, but now even when they are not open, the batter will not charge when I am using the laptop.Â
I am currently only running Firefox and Finder. Now the laptop is charging as usual. However the second I open up Premiere, After Effects etc, it goes down.
Info:
MacBook Pro, Mac OS X (10.7.5), 2012 edition
it only runs with the charger and also when I plugged in it starts automatically. The battery icon indicates that it has an 83% of the battery remaining. I don't know how it could happen and I would like to know if there is anything I can do because take it to repair it will be time consuming and I need for my job. The software is OS X 10.9.3Â
View 4 Replies View RelatedWhenever my MacBook has the charger in, there's constant 'drone' of bass from the subwoofer that my laptop is connected to, but as soon as I take the charger out the noise stops. Is there any way to stop this from happening (ie moving the cables round?) or is it just something I'll have to live with?
View 14 Replies View RelatedI've noticed a faint buzzing sound through my external speakers when a charger is plugged in to the laptop. Removing the charge kills the noise and makes the sound crystal clear again. Doesn't bother me to much, but as my uni-macbook pro is plugged in most of the time I can see this near constant buzz getting on my nerves a bit in the future. Any ideas, looking back I experienced the same thing with my macbook.
View 3 Replies View RelatedI recently bought a late 2011 15" macbook pro. Lately it emits a single beep every 5 minutes while it's running charger power. It emits the beep whilst charging and when the battery is full and the charger is still in. I've done a hardware test which didn't detect any hardware problems. The battery appears to be in good health and so does the charger.
Info:
MacBook Pro, Mac OS X (10.7.3)
Im in England currently (From the USA) and am using a "DYNEX" converter adapter to switch the electric current down so I can plug in/charge my Macbook Pro and iPad. Â It works, however the charger buzzes pretty loudly and gets hot. I brought two, one started smelling like melted plastic and stopped charging altogether. That particular charger has faulted at home before (back in the USA), so I'm not sure if it died because of the converter or because it's just faulty. Â
I have plugged in the newer charger and it also buzzes, but I'm really worried to keep it plugged in because I don't want it to fault out too. Is it normal for it to buzz like that when plugged into a converter adapter? Â
Info:
MacBook Pro
I let my new mbp(mid 2012) battery run down. It was on, I walked away for one minute and came back and the mbp was shut down. I plugged in charger and the mbp won't turn on at all. I got it on Tuesday so it is brand new.
Info:
MacBook
Pro, Mac OS X (10.7.4)
I was launching my sims game when I plugged in my portable charger in my MacBook Pro. As soon as I plugged it in, I heard a tiny poof and next thing I know the screen turned black. I held down the power button like I normally would and it wouldn't work. when I plug in the charger, there is a faint green light.
View 1 Replies View RelatedSo I just got hold of a few of these new battery chargers from Apple and I'm just wondering if these are meant to stay plugged in the wall, even after the green light goes off. Does the light going off mean that the batteries will no longer draw power from the power outlet and that it is safe to assume power will continue to be consumed? Or is it preferred that I plug and unplug the charger only when needed to avoid any, unnecessary, extra power consumption?
View 3 Replies View RelatedAbout a month ago, the battery on my Macbook (the black one) started to get worse and worse, to the point where it would work if plugged into the charger, but would automatically turn off if disconnected. After much research, I bought a replaceable battery (not through Apple, but not through a sketchy website either) in hopes it would bring my laptop to some life.Â
The new battery is now doing to same thing as before. Working if plugged in, automatically turning off if disconnected, and always shows that it is at 0% charge. Is there anything else I can do? I know I'm due for a new laptop, but I'd really like to keep this one around for just a few more months!Â
Info:
MacBook, Mac OS X (10.5.8)
I have a late 2010 macbook air 11 inch. The battery condition is normal and about has 650 cycles. The light on my charger is green and my computer only stays on when the charger is plugged in. When I unplug it the computer just turns off and my battery says its not charging and that the power source is the adapter. Do I need a new one or is this fixable?
Info:
MacBook Air, OS X Mavericks (10.9.3), late 2010 model
I've had my mac for a couple months short of a year. A few weeks ago, I needed to record a quick idea for a melody my guitarist and I had. I was aware that the I/O jack were one and the same in the 2011 MBP model, so I changed my settings to allow me to use it as an input jack. No problem.The problem, though, is that I can't use it as an output jack anymore. Audio plays fine through the built in speakers but turns into static when I change the I/O setting to output and plug my headphones in.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
The volume for my MacBook will only work if my headphones are plugged in. I've tried just about everything I could think of to fix the problem but it's still not working. I've tried blowing it out, wiggling the headphone jack, checking the sound settings from the system preferences. I've come to the conclusion that there is a problem with the sensor, but I wanted to find out if there is anything else I could try before taking it somewhere to get repaired.
View 1 Replies View RelatedI have a logitech mouse and just recently my trackpad has started not working when it is plugged in to my right USB even though the mouse is not on. I take out the USB and the trackpad works again. The left USB still works but occasionally it will stop the trackpad as well, but I unplug it and plug it back in and everything is back to normal. My trackpad was working fine with the usb plugged in up until yesterday. What is going on and is there a way I can keep the mouse usb in my computer and still use my trackpad?
View 2 Replies View RelatedWhen I unplug my charger from the side of my computer, my brightness on my MacBook goes down a few notches. Why does this happen and how can I fix it?
View 8 Replies View RelatedI have to have my hard drive replaced on my Macbook Pro. I bought an external hard drive (Buffalo) plugged it in and nothing no pop ups for instructions. Does a new hard drive (external) need something done to it on first time use?
Info:
MacBook
I have a white plastic macbook which appears not to be able to connect to my wireless network. All the other PCs and a Mac Mini in the house connect fine, but the macbook does not.It has connected since i got it, both to the home network and a network in school, but today it promted me for the wireless password, connected a few times but did not give me a IP address, and now will not connect at all! The network appears in the list, i click on it, enter the wireless password, then it says connecting before connection failed.
The network setup is a Cisco router connected to the modem and then connected to the wireless too. There are no computers connected via cable to the network.
I am trying to get a Sony ECM-DS70P Condenser Stereo Microphone with a 3.5mm stereo male plug to work on my MacBook Pro with a Behringer UCA222 USB Audio Interface and I am having no joy at all.The Microphone will not work when plugged directly into the Line-in jack on the MacBook Pro because the Audio Line-In input on the MacBook is line level -10dB to+4dB and microphones are generally around -40dB. So, I need either a line level preamp or a usb audio interface.I decided on a USB Audio Interface (Behringer UCA222).The Microphone is plugged into a 3.5mm stereo to RCA L & R cable which is plugged into the L/R RCA inputs on the Behringer UCA222. The Behringer UCA222's USB Cable is plugged into a USB port on the MacBook Pro.
On the Macbook Pro in System Preferences > Sound > the output is set to Internal Speakers and the input is set to the USB Codec (Which showed up when the Behringer UCA222 was plugged in). [code]
Info:
MacBook Pro early 2008
so the question is : will buying a new charger fix the problem? or do i have to change the battery. this happened after i stopped using it for about one month when i went overseas and didnt touch it.
Info:
MacBook
Pro, Mac OS X (10.6.8)
I use my MBP 15" (the new one), as my primary machine in my office. I sit by my best usually 10-12hrs a day working on it.
I am trying to figure out what is best to do, keep the AC plugged in or have it un-plugged and only plug it in when the battery is drained (or less then 50%)? I have tried different experiments, plugged in, not-plugged and time is about the same for life of the battery. The true question is, how is is best to do it for the health of the battery.
Is it better to keep the charger in after a completely charged or pull out the charger. Basically I'm wondering if the power is pulled from the UPS after the battery is completely charged or is it still constantly charging the battery.
View 3 Replies View RelatedI have/had a 16 GB Kingston Data Traveler flash drive with all of my work files on it. I travel a lot for work and I was just in Italy for 2 weeks. Anyway, I went to an internet cafe to print a document before a meeting. 20 minutes before I went to this place the drive worked fine. I got to the place, and it seemed to me that the guy didn't know what he was doing. He had machines running on XP and they were extremely slow, and he just kept clicking away. He finally turned to me and said that his machine wouldn't read my drive. I blanched and tried putting it back into my Macbook and felt sick when I saw that the drive was no longer recognizable on my Mac either.
I had backed up almost everything on the server before I left for Italy, and I had emailed most of the new documents I had created while away from the office. Unluckily, there was one folder of documents that I hadn't backed up on the server because there wasn't enough space there (grrr), so I had left them on the drive. A few lessons I learned:
-back up on the desktop or hard drive as well while traveling
-bring the portable printer next time
-don't let someone mess with my jump drive
Should I reformat the drive and attempt to use it again, or should I buy a new one that is a better brand? I definitely don't want a repeat of this. This is the first time I've ever had a problem like this--all the other drives I've ever used, from expensive to cheapies, all worked fine. Is there any way to recover any of these files or should I just accept that they're gone? My guess that being an internet cafe with PCs, the computers were full of viruses and the drive became infected corrupted. When I try to repair it or verify it, I get an error message.
I've read on the net that the batteries that come with apples charger are sanyo eneloops.
Does this mean i can buy a pack of eneloop batteries and they will work with my charger?
It seems that when I updated adobe flash that the plug-in cam does not work anymore, only the built in cam.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.6.8)
I'm using a Dynex Mini DisplayPort to DVI Adaptor to use a second display (an older display, I'll admit). After I have unplugged the adaptor, my MacBook still tries to read the second display, and switches back-and-forth between a blue screen & my desktop. It stabilizes once I plug the adaptor back in. What is causing this problem, and how do I fix it so I can use my primary display without having the adaptor constantly plugged in?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
