I have a late 2010 macbook air 11 inch. The battery condition is normal and about has 650 cycles. The light on my charger is green and my computer only stays on when the charger is plugged in. When I unplug it the computer just turns off and my battery says its not charging and that the power source is the adapter. Do I need a new one or is this fixable?
Info:
MacBook Air, OS X Mavericks (10.9.3), late 2010 model
I have Windows installed on my MacBook. A few days ago. My MacBook showed a black screen . I plugged it into my charger and it works fine, once I unplugged it shows that the computer is on but shows a black screen. Another issue is that only windows is working. I cannot even logon to OS
Info:
MacBook Pro
I've had my mac for a couple months short of a year. A few weeks ago, I needed to record a quick idea for a melody my guitarist and I had. I was aware that the I/O jack were one and the same in the 2011 MBP model, so I changed my settings to allow me to use it as an input jack. No problem.The problem, though, is that I can't use it as an output jack anymore. Audio plays fine through the built in speakers but turns into static when I change the I/O setting to output and plug my headphones in.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
The volume for my MacBook will only work if my headphones are plugged in. I've tried just about everything I could think of to fix the problem but it's still not working. I've tried blowing it out, wiggling the headphone jack, checking the sound settings from the system preferences. I've come to the conclusion that there is a problem with the sensor, but I wanted to find out if there is anything else I could try before taking it somewhere to get repaired.
View 1 Replies View RelatedI have a logitech mouse and just recently my trackpad has started not working when it is plugged in to my right USB even though the mouse is not on. I take out the USB and the trackpad works again. The left USB still works but occasionally it will stop the trackpad as well, but I unplug it and plug it back in and everything is back to normal. My trackpad was working fine with the usb plugged in up until yesterday. What is going on and is there a way I can keep the mouse usb in my computer and still use my trackpad?
View 2 Replies View RelatedI have to have my hard drive replaced on my Macbook Pro. I bought an external hard drive (Buffalo) plugged it in and nothing no pop ups for instructions. Does a new hard drive (external) need something done to it on first time use?
Info:
MacBook
I have a white plastic macbook which appears not to be able to connect to my wireless network. All the other PCs and a Mac Mini in the house connect fine, but the macbook does not.It has connected since i got it, both to the home network and a network in school, but today it promted me for the wireless password, connected a few times but did not give me a IP address, and now will not connect at all! The network appears in the list, i click on it, enter the wireless password, then it says connecting before connection failed.
The network setup is a Cisco router connected to the modem and then connected to the wireless too. There are no computers connected via cable to the network.
I am trying to get a Sony ECM-DS70P Condenser Stereo Microphone with a 3.5mm stereo male plug to work on my MacBook Pro with a Behringer UCA222 USB Audio Interface and I am having no joy at all.The Microphone will not work when plugged directly into the Line-in jack on the MacBook Pro because the Audio Line-In input on the MacBook is line level -10dB to+4dB and microphones are generally around -40dB. So, I need either a line level preamp or a usb audio interface.I decided on a USB Audio Interface (Behringer UCA222).The Microphone is plugged into a 3.5mm stereo to RCA L & R cable which is plugged into the L/R RCA inputs on the Behringer UCA222. The Behringer UCA222's USB Cable is plugged into a USB port on the MacBook Pro.
On the Macbook Pro in System Preferences > Sound > the output is set to Internal Speakers and the input is set to the USB Codec (Which showed up when the Behringer UCA222 was plugged in). [code]
Info:
MacBook Pro early 2008
I use my MBP 15" (the new one), as my primary machine in my office. I sit by my best usually 10-12hrs a day working on it.
I am trying to figure out what is best to do, keep the AC plugged in or have it un-plugged and only plug it in when the battery is drained (or less then 50%)? I have tried different experiments, plugged in, not-plugged and time is about the same for life of the battery. The true question is, how is is best to do it for the health of the battery.
I have/had a 16 GB Kingston Data Traveler flash drive with all of my work files on it. I travel a lot for work and I was just in Italy for 2 weeks. Anyway, I went to an internet cafe to print a document before a meeting. 20 minutes before I went to this place the drive worked fine. I got to the place, and it seemed to me that the guy didn't know what he was doing. He had machines running on XP and they were extremely slow, and he just kept clicking away. He finally turned to me and said that his machine wouldn't read my drive. I blanched and tried putting it back into my Macbook and felt sick when I saw that the drive was no longer recognizable on my Mac either.
I had backed up almost everything on the server before I left for Italy, and I had emailed most of the new documents I had created while away from the office. Unluckily, there was one folder of documents that I hadn't backed up on the server because there wasn't enough space there (grrr), so I had left them on the drive. A few lessons I learned:
-back up on the desktop or hard drive as well while traveling
-bring the portable printer next time
-don't let someone mess with my jump drive
Should I reformat the drive and attempt to use it again, or should I buy a new one that is a better brand? I definitely don't want a repeat of this. This is the first time I've ever had a problem like this--all the other drives I've ever used, from expensive to cheapies, all worked fine. Is there any way to recover any of these files or should I just accept that they're gone? My guess that being an internet cafe with PCs, the computers were full of viruses and the drive became infected corrupted. When I try to repair it or verify it, I get an error message.
It seems that when I updated adobe flash that the plug-in cam does not work anymore, only the built in cam.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.6.8)
I'm using a Dynex Mini DisplayPort to DVI Adaptor to use a second display (an older display, I'll admit). After I have unplugged the adaptor, my MacBook still tries to read the second display, and switches back-and-forth between a blue screen & my desktop. It stabilizes once I plug the adaptor back in. What is causing this problem, and how do I fix it so I can use my primary display without having the adaptor constantly plugged in?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
I cant get anything to work on my Western Digital My Book World Edition ii. I have it plugged in via ethernet to the back of my Airport Extreme. I'm trying to put all of my iTunes library on it so that my media can be played on my PS3 and other computers on my network.
View 5 Replies View RelatedOf course i'll unplug it 2-3 times a month and run the battery down to condition it, but other than that, is it bad to leave it plugged in 24/7, including when not using it and it's turned off?
View 14 Replies View RelatedMy white MacBook is not charging when plugged in. And if I take out the cord, the computer dies. I noticed this right after I had made a flight on an airplane so I'm assuming something happened while on the flight, even though I had my computer with me the whole time, and inside the case. I tried using compressed air to try and blow out any debris that might have got into the little charger port, but no luck.
View 16 Replies View RelatedI have had my MacBook Pro since May 2007. It has been working fine up until a few months ago. I will have nearly full, or fully battery and the computer will turn off, and will not turn back on unless I plug the charger in. If the charger is unplugged for 5 minutes, the computer completely shuts down. So basically I cannot use the computer unless it is plugged in. It is starting to become a pain because sometimes I need it when I am in a place without an outlet.
View 10 Replies View RelatedJust wondering, whenever I use my macbook unibody at home, I have it plugged in most of the time. When I take it to school, I don't bring my plug. When I go to sleep, I generally unplug it and put the macbook to sleep. Should I keep it plugged in even though I closed the lid whilst I sleep during the night? Or should I keep unplugged it every night when I close the lid?Also, I do calibrate my battery once a month. its at 93% after 43 cycles.
View 24 Replies View RelatedMy 2.4ghz i5 MBP runs a lot better when using discrete graphics. Minimizing and maximizing windows, scrolling, opening folders etc... all run smoother with the 330M. Is there a way to always run the 330M when plugged in, and switch to automatic graphics switching when unplugged? This would be the perfect solution for me.
View 9 Replies View RelatedI recently upgraded my last-gen macbook to a macbook pro 13". I have a feeling there's something wrong with the battery however. On my old Macbook, whenever i let the battery drain completely (After I got the 10 minute warning message), the macbook went into hibernation until I plugged it in. However, on my Macbook pro, whenever I do the same it doesn't go into hibernation. Is there something wrong with my battery or have apple changed how this works?
View 1 Replies View RelatedMy MacBook is about a year old. It has never had a problem with power or battery issues before, but now if it is not plugged in, it will work for a little bit and then randomly shut down (even with a full charge).
Info:
MacBook
I've been told that I should replace its battery since it's been damaged. I haven't had the time or the money yet to buy a new one, and right now, I really need to use it.
Info:
MacBook
My macbook is plugged into the charger, and the green light on the charger is on, but my computer says "not charging" in the top right. i've checked the charger with another computer, and it works, as well as turn off my computer, and turning it back on.
Info:MacBook
Macbook Pro always thinks that it is plugged in, even when it is not. When actually plugged in it says charging, and when I unplug it then it shows the plug symbol and says Power Source: Power Adapter.Â
I tired reseting the PRAM, and doing the thing where you turn it off, unplug for 10 seconds, plug in for 5 seconds then power on, not sure what else I can do, and if it is an internal issue with the Magsafe if it is covered by AppleCare.Â
Info:
MacBook Pro, Mac OS X (10.7.4)
My Macbook is plugged in but says Not Charging. Â
What do I do?
I have an older Powerbook Apple MacBook Pro Core Duo 2.16GHz 15" (2006) -Â A1150 that has been working fine but all of a sudden today developed a problem where it will not start with the adapter plugged in, but will start fine on battery alone. However, once started, if the adapter is plugged in it immediately powers down. I suspected the adapter and tried a known good one and it has the same issue.
Info:
MacBook Pro, Mac OS X (10.6.8)
I just bought the new MBP 13" 'cause I'm gonna need it for college, but since I'll also use it as "personal computer", for web browsing, playing music and movies, I'll probably have to charge every day. My question is: if I got home and my MBP is dead, I plug it in and use it, when the battery is fully charged, I have to unplug it or I can use it for the night (still plugged in) and just unplug it the next day for school?
Is it somehow harmful to my battery life? And by the way, I've read that "discharge the battery" means just use at least until the 50%, is that right? So if I charge it just when it's about 40%, I just need to recalibrate once a month, and that's all fine, right?
My wife and I always leave our MBP plugged up when we are near a charger. This morning the MBP had been plugged up all night, but the battery was dead. I noticed the light was out on the charger so I went to take it out, but when I touched it it turned red indicating that it was now charging. It turns out it is very finicky and randomly stops charging. Anybody else had problems with their charger? It will be Thursday before I have a chance to get to the Apple store.
View 3 Replies View RelatedI have been using my 13" MBP with a monitor for the past few months now and I just noticed that sometimes I look up at the battery status and it is plugged in and it says in parentheses not charging. I press the button on the side of the MBP and it indicates it is at about 80%. I left the MBP at home all day plugged in and I was wondering if it is doing its own battery maintenance or what.
View 3 Replies View RelatedIn the last few months I have been having trouble charging my Macbook (Early 2008). My computer is about 2 and a half years old. When I plug in my Macbook with the MagSafe power adapter, the little light that is supposed to show up green or red usually does not show up at all. Sometimes the light shows up green when it is not fully charged. Also, when my Macbook is plugged in, it does not usually start charging, though the charge on the battery will stay static. For example, I have been using my Macbook for the last 3 hours. Even though it's plugged in, the charge on the battery is still at 38%. I have tried shutting down my computer, popping out the battery, and then putting the battery back in. This allowed me to start charging my computer one time, but it obviously did not fix the problem. One time I held my Macbook and shook it up and down a couple of times, and when I plugged it in again, it started charging. Here is my hardware information:
Hardware Overview:
Model Name:MacBook
Model Identifier:MacBook4,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.4 GHz
Number Of Processors:1
Total Number Of Cores:2
L2 Cache:3 MB
Memory:2 GB
Bus Speed:800 MHz
Boot ROM Version:MB41.00C1.B00
SMC Version (system):1.31f0
Serial Number (system):W8823SXA0P1
Hardware UUID:9925BAB9-883A-5871-ADB9-71AD1063C304
Sudden Motion Sensor:
State:Enabled
and here is the Power information:
Battery Information:
Model Information:
Serial Number:DP-ASMB016-38ba-2f09
Manufacturer:DP
Device name:ASMB016
Pack Lot Code:0002
PCB Lot Code:0000
Firmware Version:0110
Hardware Revision:0500
Cell Revision:0200
Charge Information:
Charge remaining (mAh):1833
Fully charged:No
Charging:No
Full charge capacity (mAh):4791
Health Information:
Cycle count:58
Condition:Good
Battery Installed:Yes
Amperage (mA):0
Voltage (mV):11555
System Power Settings:
AC Power:
System Sleep Timer (Minutes):15
Disk Sleep Timer (Minutes):10
Display Sleep Timer (Minutes):5
Automatic Restart On Power Loss:No
Wake On AC Change:No
Wake On Clamshell Open:Yes
Wake On LAN:Yes
Display Sleep Uses Dim:Yes
Battery Power:
System Sleep Timer (Minutes):5
Disk Sleep Timer (Minutes):10
Display Sleep Timer (Minutes):1
Wake On AC Change:No
Wake On Clamshell Open:Yes
Display Sleep Uses Dim:Yes
Reduce Brightness:Yes
Hardware Configuration:
UPS Installed:No
AC Charger Information:
Connected:Yes
Charging:No
I have this gorgeous 22" ACD that I have plugged into my G5, where I use it quite often. But my intention for the G5 was to be a server, which it is. I often need some extra display space when I'm doing school work, or coding, so I was wondering if there is a way that I can use the display, while plugged in to the G5, as an external display for my MBP. Preferably something that I could stream over my local network.
View 3 Replies View Related
