My MBP is looping on start-up. It goes to the white screen with the apple logo and that little wheel made of grey lines.
It just keeps spinning then after 30-60 seconds, it shuts down and restarts only do do the same thing again.
how I can fix this? I think I may have accidently deleted some system files. The last thing I was doing was deleting things from my Hard Drive.
My computer won't turn on. Earlier today while playin music it just paused itself. I minute later it resumed. Then tonight it just shut off instead of sleeping and now it won't start. All I can get if I'm lucky is the start up chime and a super quick flash of a white screen.
Info:
MacBook Pro
My step mom has an iMac. The first gen intel one and the other day out of nowhere there was a white screen with a folder on it and now when you go to start up the iMac the screen just stays white.. What would be the cause of this and what should I do to fix it .. thank you
View 21 Replies View RelatedMacBook mac OS will not start. Just white screen no logo. All was well until I went through aiorport security?
Info:
MacBook, Mac OS X (10.7.4)
My MacBook Air just started messing up yesterday and I'm not sure why? When I turn the power on, it will make the startup sound and go to the log in screen as it should but after my password is entered the screen goes white and it never loads.
Info:
MacBook Air
I am stuck in my MacBook pro which shows white screen.
1- I tried hold C to Bogor from DVD to reinstall Mac os x , but it's not working .
2- I tried hold Shift and option to log to safe mode , but it's not working .
3- I tried reset ram, but its not working.
I am stuck and can't do anything.
Info:
MacBook Pro
White screen on start up, doesn't boot.
Info:
MacBook Pro, Mac OS X (10.7.3)
My MacBook Pro won't boot past the white startup screen with the Apple logo. After doing some trouble shooting my best guess is that the issue is either an issue with the logic board or the hard drive, but I am no expert so I may not be right. Here is what I have tried so far. I have done all these steps multiple times and the results have varied, but here are my most recent results:
1) First off, there are no peripherals connected so that is already ruled out as the cause.
2) When I try starting up in safe mode (holding shift while starting), the Apple logo, spinning wheel and progress bar appear. The progress bar fills about a third of the way then stops. I have left it for quite a long time and it still stays at a third of the way.
3) When running a safe boot (holding shift+command+v at startup) it gives me a " SATA WARNING: Enable auto-activate failed" message, and then eventually times out. Here is the full message:
4) Resetting the PRAM (holding option+command+p+r at startup) does the second chime but only results in the flashing folder icon with the question mark.
5) I tried booting up the computer in single user mode (holding command+s at startup) and running fsck -fy, it again gives me a "SATA WARNING: Enable auto-activate failed", then eventually times out. Here is the full message:
6) I tried booting in recovery mode (holding option while starting). When I do this I do not get the OSX utilities screen. Instead I get a white screen, sometimes my hard drive shows up on the screen, sometimes it does not.
If i boot in recovery mode with my osx install disc inserted the disc appears. If I select the hard drive we are just back to the apple logo and spinning wheel. If I select the install disc it goes to the apple logo/spinning wheel again, sometimes it allows me to start running the install, but then when it gets to the step where you select the hard drive to run the install on, no hard drives appear.
So that's where I'm at. I do not care about losing any data because luckily I backed up this machine right before this started happening.
I tried to connect to a montor with a DVI connector but it's not getting a signal. Is there a quick fix? (School project today!!)
Info:
MacBook Pro, Mac OS X (10.6)
Just came back from the Genius Bar at Apple Amsterdam. Both iTunes and iPhoto had problems launching and libraries were not loading. Ruled out hardware problems so they tried installing OS Snow Leopard over my 10.5.8 in a way to keep my documents safe. All went well until halfway it said it couldn't install succesfully. Made a new appointment for in 3 days from now. They would then overwrite the current OS with the new one so i should go home and make sure to back up all my files in the meantime. Problem is that when i came home and started my laptop i got a blank/white screen with a blinking documents folder symbol with a question mark in it! Does anybody know what it means and will i be able to ever make a back up of my documents?
Info:
MacBook, Mac OS X (10.5.8)
Yesterday my iMac would not boot up passed the dong and the white screen. How do I get passed this?
Info:
iMac, Mac OS X (10.7.4)
Today I ran the safari update on my MBA (snow leopard). After that MBA won't start I see a white screen with the apple symbol and the sort of turning clock symbol (not the beachball) turning . after some time a horizontal line appears to be filled in , but it won't fill in \(only for a sixth) The apple symbol remains on srceen for ever but no next screen did already do several restarts no success. what else can I try ?
View 7 Replies View Relatedmy imac keeps freezing on the white boot up sceen where the apple logo usually appears. But the apple logo does not appear also the computer doesnt go beyond this point just fresses.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.3)
I have not been able to startup my iMac for 3 days. When I turn it on all I get it is a white screen. After about 10 minutes a folder with Question mark inside apears in the middle of the screen and it just stays like this. I unplugged everything from the computer except for the mouse and keyboard. I had this computer since 2008 and never had a problem until now.Please help
Info:
IMAC 24 2.8, Mac OS X (10.5.2), 2 GB RAM
My mac desktop was working this morning, locked up and then when I rebotted it it stays on the logo screen. Any suggestions on getting passed it?
Info:
iMac
I put my PowerBook to sleep and left home with it about an hour ago. I just opened it and it woke up but the screen was black. I turned it off and back on. The white screen with the apple and progress wheel came on for a normal period of time, but then the screen went all white and there were several uneven horizontal lines across the middle and froze there. I forced a restart and the same thing happened but this time I got the semi transparent window that says need to restart. I did that and I got the same screen without the message.
View 5 Replies View RelatedIt will turn on and go to the white screen with the gray apple but even after several hours it wont do anything. I tried holding down C since my copy of leopard is stuck inside and it does the same thing.
View 6 Replies View RelatedI have a Mac Mini bought in 2005. It has Tiger OS. When I turn it on a white screen appears with the Mac symbol and a wheel continues to rotate and nothing happens.
I�ve read some similar problems saying to select keys like Apple + Alt + P + R but I�m using a Non-Mac Keyboard so I don�t have the (Apple) key.
My Mac Mini has a white screen and wont eject the start up disk..What do i do?
Info:
Mac OS X (10.7.3)
OK, so I did something truly stupid. I managed to splash water on my macbook. I hit a small cup of water (about 2 oz) with the end of the computer with the CD drive. It immediately shut off. The next day, I set it outside to dry in the sun and by midday, all was well. It functioned just as it always had. This continued through last night. This morning, when powering on, all I got was a white screen (no tone). After doing powering up while holding command-alt-r-t (a sequence I found on a help board), it will now make the tone, but maintains the white screen. I am slowly accepting that I am an idiot and the computer is probably a loss. Multiple internet searches have suggested it is either the logic board or the hard drive (at the very least). Any ideas?
My dad is a computer programmer, but does not use macs. He looked at it and just shook his head. I am very non-computer savvy (I know how to turn it on). He did say if it is the logic board I should be able to retrieve all of my (non backed up) files on the hard drive. He said he really doesn't think that it is the hard drive.I also am learning that it will probably be cheaper to replace than to repair. However, I am willing to try anything which might help.
I was working on this machine 3 hours back. Thereafter I put the machine on standby mode. Now when i try to start the laptop, the icon for password does not appear. Instead a mouse curser sign and a circle [like freezing] appears on the screen.
View 1 Replies View RelatedI have a MacBook, late 2008 It originally had 120 GB hard drive. Because I had less than 10 GB of space left, I replaced that with a 320 Western Digital Scorpio Blue HD (by myself, with an antistatic strap, etc). Everything seemed fine for a few days. Lots of space, immediate responsiveness with programmes, etc....nothing could be better. Then the system started getting sluggish, and I started getting spinning beach ball clicking between apps. Every time I ran verify disk permissions, there was a long list of permission repairs. Running repair disk never yielded a result other than everything being okay. I even created a flashdrive with the installation software. And I ran Onyx to try to clean things out.
Then a few days ago, after restarting my computer (I may have done an update, but am not sure), my computer slowly booted up, came to the login screen, I entered my password, my desktop appeared and it "hung" for about 30 seconds, then the screen turned blue and went back to login screen. I made several attempts to login, but always got the same result.
I used my bootable flashdrive (which I created with SuperDuper to contain the installation disk before I installed the new hard drive) to check and repair permissions. Each time I did that, I got the same permission errors. Again, nothing detected with disk verification/repair. When I start up the computer in safe mode, everything is fine except Safari kept crashing. Deleted and reinstalled safari to no avail. Still crashed. No problem in Firefox. In the regular mode (not safe mode), I reinstalled Flash, restarted, then back to the looping to the login screen. Still no problems in safe mode. At first I thought there would have been something with the new hard drive, but everything works fine in Safe Mode, so I'm wondering if there is something with Safari or Flash. I've updated ClamX and run a ClamX scan as well to check for viruses/Trojans.
Info:
MacBook, Mac OS X (10.6.8), Late 2008
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies View RelatedI've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick, that I can see best behind an all white screen, i.e. a blank page of a word processing document.
View 19 Replies View RelatedI've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick,that I can see best behind an all white screen, i.e. a blank page of a word processing document.
Anyone seen anything like this before. I can actually see part of it right on the white of the page I am typing in this thread.
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
View 1 Replies View RelatedI got a new hard drive on my macbook and installed snow leopard on it in my friend's house. When I went home I tried to install new RAM I got, which was 2x1GB Corsair DDR2 667MHZ 200pin. My macbook is late 2006 model and according to apple the macbook has 2GB ram limit. Then I try to turn it on but nothing happens no sound, no light, nothing.
View 2 Replies View RelatedMy friend's MacBook Air crashed. It blacked out, and turned off. Now, when he presses the power button, he gets a beep, and that's it. the white LED light also doesn't flash. It's a short, soft beep.
View 2 Replies View RelatedWhen I go to front row, all my video content plays sound, but the picture is just a pure white screen (shows the slider to move chapters, etc., but the screen is just white).
Any ideas for solutions? I did google searches, etc., to no avail. I have a MP (not early 08), which I upgraded the graphics card to a 2600XT, and it's running Leopard.
there are two things that the macbook is doing to me. one is that sometimes when i move the screen up or down (the hinge is rather stiff) a white (thin) line flashes across the screen. but recently, while randomly browsing through the internet, the screen almost... i guess faded to a gray screen, but like gradually, and not like a kernel error, like the display just faded away. happened twice in a row, did a battery pull and now wont do it again.
View 6 Replies View Related