I want to boot my MacBook Pro from an external drive that has 10.5.8 on it but when I select that drive as startup disk it just beeps continuously.Apple says that doing this is not supported. But I really need to run some older software for a while....
Info:
MacBook Pro (17-inch Late 2011), Mac OS X (10.7.3)
I have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable.
Info:
iMac, Mac OS X (10.6.8)
I am not too tech savvy....Am I supposed to keep the external HD plugged in 24/7 in order for Time Machine to work? Is it going to damage the HD if it's constantly being plugged in?
View 14 Replies View RelatedI have installed my new eSATA Newertech cable in my Mac Pro. I want to install windows XP on this external drive, because I have the Apple RAID Card.
I started Boot Camp Config, but I can not install the Windows Partition on the external drive. The external drive is not listed in boot camp.
What can I do? Is there a tutorial to install windows XP / Vista on a external drive (connected via eSATA) when you have a RAID Card?
Just got the time capsule, going to use it for wireless time machine back ups of my laptop. I would also like to connect an external drive to the time capsule for movies and audio files that are too big for my laptop.
I notice if I connect my owc 7200 rpm external drive via the USB port to the time capsule, things are a bit sluggish when I access movie/audio files over the wireless...What if I purchased an external drive with an ethernet port? would it work if I plugged it into the time capsule? and if so would there be a speed increase?
I am in need of assistance with backing up my macbook pro using time machine. I am running Mac OS X leopard 10.5.8. I have attempted to backup to a network share folder on a Windows machine, but the backup abruptly ends. So, I decided to attach an NTFS external drive, connected via usb. The external drive was formatted on a Windows 7 machine (not quick format); so, it currently has no space occupied. I installed MacFuse and NTFS-3G. Then, I rebooted and attached the NTFS external drive. I set the preferences in time machine to backup to the aforementioned drive. However, Console is reporting that the backup failed with error 19, and time machine is reporting that the storage location for backups cannot be found, when i command time machine to backup now.
Is there something I'm missing? I have seen at least one other thread on the Internet where a mac user was able to get time machine to work with an NTFS external hard drive. Do I need to create a separate sparse bundle image and copy it to the external drive, similar to the method used to get time machine to copy to network shares on Windows? If the ironclad rule is time machine ONLY recognizes HFS+ drives, then a sparse bundle image is a good workaround. But then what is the point of MacFUSE and NTFS-3G. What is its purpose, as it relates to time machine?
I have a Mid 2009 21inch IMac connected to the external hard drive. I just bought macbook air which i use to connect to my iMac at home via icloud. My problem is that i cannot find the external hard drive which is connected to the iMac. I tried to assign the external storage as shared folder. That didnt work. I tried to make alias and drop it in the public folder. it does not work either.
Info:
iMac, Mac OS X (10.7.4)
I'm trying to backup the contents of my MacBook Pro wirelessly to an external hard drive that is connected to a Mac Mini in my living room. All the tutorials I've read say to create a sparsebundle file with the same name as the one that's found in the folder of your Time Machine backup.
View 1 Replies View RelatedI have a 1TB Time capsule, I would like to attach a USB drive to the Time Capsule and transfer my iTunes Library to it so I can run itunes from wifi. I am new to network stuff. My current iTunes library is on a USB drive velcro'd to the back of my Macbook - rather inconvenient, the USB port is loose. The music files are external but the library files with ratings/play counts are in the iTunes folder.
Info:MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7), 1TB Time Capsule (3rd Gen)
I consider myself very good at all things Mac. But this one has me stumped.
I've just arrived home with a WD My Book Home Edition 1TB external drive. Formatted for Windows it mounted correctly via FireWire and USB.
First things first: I formatted it for the Mac... Mac OS Extended (Journaled), two GUID partition tables. So far so good. Each partition is recognized, each mounts like it should.
Time Machine then backed up my Intel iMac... again, everything's normal. No odd or unusual behavior.
Here's where things get strange.
For whatever reason I formatted the drive via USB. But my intention hereafter is to connect via FireWire... I need each USB port for peripherals.
But the drive isn't recognized through FireWire. I'm asked if I want to initialize it. When reconnected through USB the drive mounts again.
What's going on? Why is the drive recognized when connected via USB but not when connected via FireWire?
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion?I would like to use the external on a permanant basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
So I bought a 2tb external drive to save space on my main drive - I copied all my movies and have been dropping a bunch of mini dv tapes onto it - but when I open the drive none of them show up
When I get info in disk utility I get one that shows I have avaialble 1.99TB of 2 TB - and right below it says 890 MB are used - don't get it
Tried the disk utility and it says they are working fine .... repair did not seem to do anything
Info:
iMac, Mac OS X (10.6.8)
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion? Any hints on where to start? I would like to use the external on a permanent basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
I have 2 macs in my house.. a macbook pro and a macbook air. I have an old dell desktop running windows 7 that has a terabyte external harddrive hoooked up to it. I want to be able to use it as a network time machine drive. Both laptops are running snow leopard. I was wondering is this possible and if so, how can I do it. Currently I am able to see the desktop and the external hardrive on my network from the macs, and I am able to drag and drop onto them, however I want to be able to use time machine.
View 2 Replies View RelatedI have a MacBook Pro 13'' (mid 09) and another MacBook pro 15'' (early 09). The problem below applies to both of them.
I often use my 15'' mbp connected to a usb keyboard, mouse, display etc. Basically it is used as a stationary computer that can be easily moved (to work/school etc). This is my main laptop so this is where I noticed the problem first. Sometimes when just using the computer as normal (using itunes, opera, adium etc) the OS X will just suddenly become very sluggish and unresponsive.
However it is not OS X itself, but the GUI! Example: if I move my mouse over the dock, it wont animate. If I try to do any finder related action the GUI response is way of and if I try to do something in the menubar I have to hold left click, if I let go it just closes the menu.
This goes for the application folder as well (I have it as a list). Normally it will just funtion as normal but when this problem occurs I have cant let go of the mouse button when moving through the menus because then the menu closes!
Okay, So i have my Unibody Macbook Pro (late 2009) hooked up to external speakers (RCA Home Theater system with a standard audio cable). Everything works fine and there is no buzz or sound except for the music of course until I plug my printer in. I know the obvious solution is to unplug the printer when listening to music but the printer is shared and other people print off of it etc. and I was wondering if anyone knew why this happens.
View 1 Replies View RelatedI am trying yo plug my NEC EA231WMi into my MBP via DVI and a DVI to mini display port Adaptor and the computer is not recognizing the monitor. It does nothing when I plug the monitor in.
View 1 Replies View RelatedWhen I connect my 13" MBP to an external display to watch a movie etc. the external display seems to be darker than it would appear if I was watching on my MBP. Is there anything I can do to make things brighter (other than turning the brightness up on my TV)?
View 1 Replies View Relatedi was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies View RelatedDid any of you experienced this ? My WiFi slows down or even stops working when external monitor is connected (via the big connector, don't remember it's name, DMI or something like that). Air Rev A, 1.6.
View 5 Replies View RelatedI have a strange problem with a WiFi slowdown when connected to a TV. Here are the specs of the equipment:
2.2 Ghz white macbook, santa rosa, 4 gb ram, purchased January 2008
Panasonic TV connected via HDMI to DVI cable + Apple Mini DVI to DVI connector
USB Western Digital harddrive connected to a 500 GB Time Capsule (1st edition, no dual channels)
Snow leopard 10.6.1
Before upgrading to snow leopard, I would frequently use the macbook to provide video to the above mentioned TV streamed from a hard drive connected to an imac (connected to the same time capsule). I moved, and upgraded to snow leopard, and haven't tried this until finished setting up my equipment yesterday. I can stream videos to the macbook from this hard drive fine when nothing is connected. However, the moment I plug in the mini-DVI connector, the WiFi drops to a crawl. This applies not only the to air disk but any data from the network (internet, etc.)
A couple of additional notes: Display is set to mirror. Has nothing to do with clamshell mode because the macbook isn't closed. Nothing to do with location/interference- the effect is instantaneous with plugging and unplugging the cable. The base station is actually closer than in my previous setup and is pretty much 20 feet away in direct line of sight. I connect to another external monitor daily at work (vga, again with apple mini dvi to vga adapter)- no issue whatsoever restart did not help. I canceled all time machine backups over the network to limit that as a factor- no effect.
WITHOUT closing the lid, because i like using the touchpad. i know that you can turn the brightness all the way down, but sometimes windows from the main screen randomly open on the other display. and it also slows down performance. i want to turn off the 13" screen as if the lid was closed. that way, the mac doesn't even see it.
View 5 Replies View RelatedAll I need to achieve is, use the external hard drive connected to my windows laptop as a destination for Time Machine backup for Macbook Pro location. This would be assuming that both the windows laptop and the Macbook Pro are connected to the same wifi network.
View 4 Replies View RelatedWhen I close my macbook pro whilst it is connected to an external monitor the internet connection slows down?
Info:
Mac Pro, Mac OS X (10.6.7)
Well my unibody macbook display decided to screw up last night, it was working fine last night no problem. Connected to a external monitor. I fell asleep last night with front row left on, obviously it went to sleep and then I woke up and the screen was black. Now the LED lights are working, my external display is also working. The display settings recognize a screen being present (when I click detect displays and gather windows - 2 windows appear). Ive reset PRAM, SMC, reseated the RAM, control+shift+eject (which just made the screen flicker a little after turning it back on) and Im out of ideas. Its out of warranty and about about 18months old.
View 4 Replies View RelatedI have a 13" MBP and just bought a new 23" external monitor connected via mini DVI to HDMI adapter.The monitor is recognized fine, but there is extreme jitter on the screen - basically very annonying and unusable.
Info:
MacBook Pro
my screen cracked on my MacBook and I'm unable to see anything (it's just fuzzy white) so I purchased the VGA adaptor so I can connect to an external monitor. When I plug in the screen is zoomed to close and I can not view the entire screen. I can see one application that I have open, which is iMovie but can not see the top menu or my icons at the bottom. How can I adjust the settings seeing how I can not access the menu bar or anything else for that matter. It also appears to be showing a second screen, maybe not my desktop because the background is different. I'm running on OS X Lion.
I'm trying to finish an end of the year slide show for my kindergartner that I need completed today, I was five minutes away from finalizing then my two year old threw his monster truck at my screen!
Info:
MacBook, Mac OS X (10.7.4)
I have a Late 2011 MBP, just recently I also go an Xbox and wanted to hook it up to my external display that I have been using for a long time with no issues. I went and bought this: URL....to be able to easily switch between the two inputs. The xbox works fine, however when I view my Macs input the screen flickers a static image very frequently.
I know what you're thinking, it's probably an issue with either a cable, or the device. But when I boot into Windows via Bootcamp with the same exact setup, there is no flicker at all. The display is a dell s2440L, the HDMI adapter is a rocket fish.
Here are the troubleshooting steps I have tried: Resetting PRAM/SMCChanging out HDMI cables on both the Splitter output, and the inputs (I tried 3 different cables on both the inputs, and outputs.)Downgrading OSX to 10.7 (And then went back to 10.9)Lowering the resolution on the monitor (Lower resolutions flicker just as much, if not more.)Resetting the splitter by unplugging the HDMI cord powering it and plugging it back in.and of course, plugging my computer into the splitter input that the Xbox works fine on, as well as taking the xbox one out so the computer is the only input on the splitter.
Like I said, the Xbox works fine, and even the computer works fine in Windows, but whenever I boot into OSX my screen flickers with this static. I should add, the display works fine when not connected to the splitter on OSX.
I searched the archives and I can't believe no one has mentioned this yet! This is a huge problem on both my Rev A and my new Rev B. When you connect an external monitor and external speakers using the headphone output, there is a high frequency ringing sound coming out of the speakers. I've managed to live with it by turning the treble to minimum and keeping the volume low enough but at the expense of sound quality. The strange part is, if you disconnect the monitor, the ringing sound stops. The problem only occurs if you have speakers and monitor plugged in at the same time. I've tried this on my Samsung monitor, my SONY TV, and my Panasonic audio receiver. The problem occurs with both Rev A and Rev B while my white MacBook and 2007 MacBook Pro all sound fine.
View 10 Replies View RelatedAfter some various installations and file copy from/to external hard drives i ran the repair permissions on the bootup hard drive.
There was a listing about a mile long. Whoa, that does not look good to me.
So, i ran the persmissions repair again: another mile long listing: yikes.
Yep, ran another permissions repair and same thing.
How many times do you have to run permissions until it just show a few permissions that had to be corrected ? Or is this a sign that the system is in trouble.
This was an external FW drive with Leopard run by iMac 3.06GHz.
