i was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies
Is it possible to install Snow Leopard from a disc image on an external drive?
View 7 Replies View RelatedIn trying to repair my hard drive, which disc utility said was corrupt, it stopped repairing it because it could not unmount the disc?I booted my macbook pro from my backup hard drive.
Info:
macbook pro, Mac OS X (10.6.8)
I would like to install Snow Leopard on my Macbook Air Rev A as I have work to do that requires 10.6.x - however I didn't buy the Superdrive so need to do this as a remote install.
I have a PC with a DVD drive and can install the software; I also have the USB ethernet dongle and assume this will be better to use than over Wifi
Has anyone got any hints about doing this? I'm slightly nervous about installing an OS upgrade over a network for some reason..
My dvd drive is busted, so I'm attempting to use remote disc to install snow leopard on my macbook pro (running 10.5.5). There doesn't seem to be a clean install option without running the snow leopard disc from boot. Is there any way that I can run the install disc from boot via remote disc so I can run a clean install? I tried restarting my computer and holding down the alt/option key, which showed the only available boot drive as my macbook pro's internal hard drive.
View 1 Replies View RelatedI just upgraded my MacBooks hard drive and put in the install cd to restore from my time machine backup. Evedything went smoothly until I chose the new hard drive as the destination for the restore. I was told that the install failed to erase the hard drive and to restart and try again. So I did but when I try to erase or partition the drive, there is an error and it fails. The hard drve seems fine since it can be seen by disc utility but after it fails to partition or erase, it disappears from the disc utility forcing me to restart. The process I've done about 5 times now is boot the comp, choose time machine restore, then while the install is calculating the space the restore would require and searching for discs to install on, nothing shows up so I go to disc utility and try to erase or partition the drive only for it to fail and disappear from disc utility. At this point I hold down the power button to turn it off and restart the process.
The first time I tried, the restore process saw the drive while calculating the restores size requirements and allowed me to go the next step where it would automatically try to erase the hard drive (without me having to go into disc utility myself) but after the first try, it just says "searching for disks" and so I go into disc utility myself where I can see the disk.
When installing Snow Leopard, will it erase my hard drive and force me to start all over or will it just update the software and keep everything the way it is on my Mac now?
View 6 Replies View RelatedI am having problems with my I-Mac. It is the 2.8GHZ 24" model and when I try to start it up I get a white screen with a blinking grey file folder with a "?" mark in it??
I had this problem before. Erased the hard drive and then reinstalled everything. I made it through it but I think I may have done it wrong. Anyways the computer worked good till the other day. I upgraded to Snow Leopard and now it is doing it again.
Do I need to start with the install disk 1 that came with the computer and install disk 2, then install snow leopard? Or can is there a faster route of doing this?
I have a white shell Fall 2007 (Santa Rosa) Macbook with a 120gb 7200 RPM hard drive. I bought a new 320gb hard drive and snow leopard today and want to ensure that I won't lose anything if I back my hard drive up as a "regular leopard" machine and then try and recall the files after installing the new drive as a "snow leopard" running system.
View 1 Replies View RelatedI bought a 2009 Macbook, from a friend that needs a new hard drive, but he doesn't have Snow Leopard disc that came with Macbook. I have a Macbook Pro that came with Snow Leopard. I have upgraded it to Lion. Can I use my old Snow Leopard disc on the Macbook, after I put in the new HDD??
Info:
MacBook
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion?I would like to use the external on a permanant basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion? Any hints on where to start? I would like to use the external on a permanent basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
I got a Power Mac G4 from a friend. I realized i can store all my content on there and just access it remotely from my 2011 Macbook Pro. While my G4 was running remore desktop it froze. So i held the power button to shut it off and when i restarted it all i get is the Apple logo on the gray screen,and i t wont start in safe mode. I forgot to mention i started togo throught the G4 and take his name off and ad mine (hard drive name and user names). I took the hard drive out and attached it to my MacBook Pro. The hard drive works fine,And i can access everything. I tried running disc utility on the G4 hard drive with my MacBook Pro. and it said ALOT.
[Code]...
2012-02-19 22:47:56 -0800: Volume repair complete.2012-02-19 22:47:56 -0800: Updating boot support partitions for the volume as required.2012-02-19 22:47:59 -0800: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2012-02-19 22:47:59 -0800:
2012-02-19 22:47:59 -0800: Disk Utility stopped repairing “Chad ”: Disk Utility can’t repair this disk.Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2012-02-19 22:47:59 -0800:
Info:
PowerMac, Mac OS X (10.1.x)
I purchased a copy of SL that I want to install on my MBA. I know that Leopard can be installed using the remote disk feature since my MBA doesn't have a DVD drive. problem is that I can't find anywhere saying that SL will support that function. Although I did see that the minimum system requirements require a DVD drive, but it doesn't say anything about a remote drive.
I'm sure it would be stupid if it wasn't supported, but then again you can't installed XP without the SuperDrive.
Well, my question is very simple: I have a MBA and this other laptop from work, a crappy HP which is old as hell. I'm planning to use Remote Disc to reinstall my Leopard, since the upgrade to 10.5.3 really screwed things here, and I can't figure out why. Point is: instead of running all Leopard installation thru Remote Disc, I would prefer to share Leopard disc 1 over Remote Disc and restore it to a partition on my external HD, making a clone of it, which would install *much* faster. Has anyone tried anything like this? There's any Windows program which allows me to rip a Mac DVD to a Mac partition?
View 2 Replies View RelatedLooking to upgrade to Lion but want to back up to external hard drive first. I have OS X 10.6. Time capsule vs another plug in? I already have wirless via internet service so is Time capsule worth the $ vs another plug in product?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
I have an external hard drive which I first used with my pc. It is formatted for NTFS. Now with my new MBP, I want to back up data, and I am having no luck. The external hard drive is a Verbatim brand, 500GB. On their website FAT32 download dosnt work! I have tried disk utility with no luck. What am I missing?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
with my Leopard installation i have a problem where it fails to boot up likely due to a previous unexpected power cut.
From googling the issue it seems like the only solution anyone has had to the same problem is to re-install.
However I've lost my Leopard system discs.
I booted into my Bootcamp Windows installation and installed the latest drivers from the Snow Leopard disc which i recently purchased (and came today)
This gave me the option to read files (and presumably copy) from the mac partition but no delete function.
I have two problems here:
1. I only have 2.61GB free on the mac partition, Snow Leopard requires at least 5GB. Since I can't boot into OS X and Windows can't write to the partition i can't delete any files.
2. My mac won't boot the Snow Leopard DVD for installation. I hold C while booting and it has no effect. It does however run the Hardware test if i hold D while booting.
I have an external drive i could probaly make enough room on to back up my entire osx partition for a totally clean re-install.
However this requires some sort of access to the drive/write capabilities. Maybe something like bootable linux?
And any idea why my disc won't boot? (even if i had enough space for a install...that would be a bit pointless if i can't get the disc to boot)
This is a major issue for me, as I feel like I'm going to end up damaging my hard drive.
I am downloading a legal torrent to my external hard drive, however when I quit Transmission and try to eject my external drive, nothing happens. Snow Leopard doesn't even say it is in use like it is meant to. It just does nothing to eject the drive.
So I end up having to yank the USB plug out.
What gives? It ejects normally as long as I don't download to it.
I have no id� whats wrong, I want to install Snow Leopard(from the external) on my Core2duo Macbook pro, which is running Leopard at the moment.
I have a Snow Leopard image, and I have used Disc utility to partition the external hard drive (GUID), and I assume the partition and install went well on the external, because in Disc start the external appears as OSX 10.6.
Then the problem: The macbook wont boot from the newly made external it just gives me this sign (of course without the colours).
I have tried to start the macbook normal, and with the option key held down were the external pops up.
I have also tried to chose the external in disc start and reboot with no luck.
I have tried to start the Snow Leopard install(external) within Leopard where the install start fine, but when it reboots and wants to continue the install, the sign appears.
The external harddrive is a 5400rpm 40gb 2,5" which is only powered by the usb port maybe thats the problem?
Has any one used Disk Repair on an external hard drive? Does it erase everything?
Info:
Mac OS X (10.6.8)
How do I reformat my external hard drive with Mac OS extended using desk utility?
Info:Mac Pro, Mac OS X (10.5.8)
I've recently converted to the Mac-side:
I'm having difficulty with my external hard-drive, here's the info on that one:
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
When I was copying my picture folder to external hard drive I stopped it now I dont see my orginal files on my computer. Say hidden files
Info:
MacBook Pro, Mac OS X (10.5.8)
I've been having this problem for a while now and its only with images and videos when i try to open any picture or video this msg comes up "The file couldn’t be opened because there is no such file" and i can only open it if i copied the file from my hard drive to my computer.when i open the info for the same picture (one in on the hard drive and one my computer) the one on the hard drive has nothing under "more info" while the one on my computer has a lot of details under "more info" .
Info:
MacBook, Mac OS X (10.6.8)
I had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all
Info:
MacBook Pro (13-inch Early 2011)
Just wondering if it's possible to install games (like Diablo III) to an external drive so it doesn't take up any precious GBs on my MacBook Air.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.6.5)
I have installed my hard drive from a previous but terminally I'll iMac that was running Snow Leopard into a Sata to USB enclosure. This is displaying on the desktop of my new iMac running Lion as an external Hard drive,also system preferences sees it as a start up source.My question is , is it safe to restart into Snow leopard without causing a kernel panic and if it does boot will it be fast enough to use as it as a USB drive.
Info:
iMac, Mac OS X (10.7.2)
I went to make a copy of an important drive and accidentally re-formatted it (re-formatted mac journaled, originally mac journaled). The drive contained a bunch of important disk image files which I need to retrieve whole. I'm fairly confident that the files are still there and only the table information got overwritten, as the re-format took about 30 seconds. None of the recovery software I've seen however, can retrieve .dmg files, or such large files (these are up to 32 gb each in size).how I can retrieve these disk image files?
Info:
Mac OS X (10.6.8)
I have a 2007 Intel MBP, running Leopard. I purchased the family version of Snow Leopard. When I tried to install it, it just spins the disc for a minute, makes the noise like it's trying to read it and then spits it out. All other discs work fine with my MBP so I know it is not the disc drive itself. I have all software "up to date." My brother installed SL on both of his MBs, one newer than mine and one older, just fine (with the same disc). I haven't seen anything out there with this issue so I wanted to start a thread to see if anyone knows how to resolve this issue (beyond taking it back to Apple and exchanging).
View 4 Replies View Related
