OS X :: Macbook Pro Screen Dead After Opening Case?
Jun 29, 2010
My friend has a 1st gen Macbook Pro (the model just before the unibody) which I offered to upgrade the hard drive in after he was complaining he didn't have enough space. I successfully did this to mine last year so I didn't think I would have any issues doing it again.
It was all fine until I put it all back together again and fired it up, and now the screen remains blank. I can hear the hard drive whirring away and the CD drive spinning when I put the installation disk in (which now I can't get out) but nothing seems to be working. I thought it might have something to do with the new hard drive I tried to install so I swapped it back out for the old one and I still have the same problem.
I was very careful dismantling it (and have done it many times before) and I can't see anything obvious internally that would be causing this problem. Does anybody have any idea what could be causing this? It's bad enough this is happening but it's even worse that it isn't my computer that it's happening to.
if any of you have any stuck or dead pixels on your machines? I have a blue one and it's sh*tting me up the wall. I tried everything, the website that just flashses all the different colours, the damp cloth and then tapping it trick... turning it of and on and applying pressure, all of them to no avail. Anyone else have any pixel issues? Also when looking at my MBA from the side when the screen is closed there is quite a big gap between the keyboard (bottom half) and screen (top half) it's closed and tight towards the thin end, but towards the bigger end the gap gets quite large, about 4-5mm...should i put a book on it or something to try and flatten it out?
When ever i open or close the case for my white macbook it makes a creeky noise. Is this normal or should i go to the apple store and get them to check it for me?
I have a brand new 15" i7 Macbook Pro that I bought from the Apple store over 14 days ago. I opened it up to put in an SSD drive and optibay. Now, this was my first time opening up a unibody, but I've opened up many notebook computers and older style Macbook Pros before, so I'm not a newbie.
However, putting things back together I ran into a problem. One of the screws that secures the metal plate on the bottom of the machine will not catch in it's hole, and therefore does not stay in. I swear I did nothing to strip this screw or the hole it goes into. When I screw the screw into the hole with the case off, it smoothly sets and seems to be fine. However, when the metal plate is put on and the screw is put threw it, it's like the screw is not long enough to reach the threaded part of the hole
Yes, I'm positive it's the right screw. The hole I'm talking about is along the back side of the computer, towards the hinges, and is the only one of the 4 screws that is the shorter style screw (vs the long ones that occupy the other three holes).
I'm at a loss for what to do. I'm thinking about putting all the stock stuff in place and taking it into the apple store for help at this point.
Putting a new DC In board into my iBook this afternoon, but I'm stuck on opening the bottom case. I've got all screws apart from the Hex screw in the middle of the case, which will not come out at all. Im using a T8 Screwdriver for it, the same one that got all the other hex screws out.
I'm wondering how uniform the backlighting is on everyone's mid-2010 MBPs. The screen on mine is sort of a gradient, with the screen becoming progressively brighter towards the left side. There are also what appear to be columns where the screen is slightly darker than the surrounding area. This makes it annoying to read in low-light conditions because the left side of the screen will be at a comfortable level when the right side is slightly too dim, or the other extreme. I absolutely cannot stand dead/hot pixels though which makes me hesitant to have the screen replaced. I just bought the notebook a week ago but I don't want it replaced, as I installed a Moshi PalmGuard before I noticed the screen issues. I also installed an InvisibleShield but I can have that replaced at no cost.
I have owned my new MBP for less than 3 months and I have already spotted a dead pixel. It is about 2.5" about the dead center of the monitor. Whenever I have a browser or any other light background up I see it stick out like a sore thumb. I did a search on the forums and saw that Apple has a "policy" regarding these things before they will replace it. The nearest Apple store is 3 hours away and they want me to bring it in. Obviously I don;t want to drive all the way there for them to turn me away. What do you guys think....too OCD? The short amount of time I have owned it though makes me want it fixed...and I can't NOT see it now that I know it's there (yes it's a double negative).
I have an old 2007 Macbook Pro that the video card died in. I ordered my new laptop and want to transfer the information from the old one to the new one. The migration assistant wants me to run the migration assistant on the old computer, but I can access it because the screen is dead. Hooking it to a monitor wont work either....how is the best way to get my data onto my new MacBook? I have a firewire to quickly transfer the data, just not sure how to get to it.
I was wanting to know how hard it is to change top and bottom case and keyboard area? I would like to know that if anything was to happen to my soon to have macbook I could change it. Also this on the older macbooks. And if I have Apple to change it how much would it cost? And yes I know that they should replace keyboard case area for free because of the defunct cracking issue.
It seems one of the defect possibilities of the new manufacturing process is that the new Macbooks or Macbook Pros can get dust trapped behind the glass screen. At least, that's what happened to my Macbook. So they let me return it, and I got a Macbook Pro, and now the new Macbook Pro, though a thing of beauty, has a bright dead pixel in the top middle screen, as well as a dimmer dead pixel 2 inches to the left of that one. I heard that Apple's dead pixel policy was three dead pixels or no deal on an exchange, but I just bought the computer a few hours ago. Do you think I have a shot at them replacing it? I hate to think of staring at this, (bright) dead pixel for three years, (not to mention the other dimmer dead pixel).
I just bought my white MacBook and its a great computer except for the 2 dead pixels that i found. On the left side there are 2-3 dead pixels about 1 inch from the bottom of the screen and 1 inch from the top.
I bought it from BestBuy this Sunday and only discovered the problem today. So my question is can they tell me that it is OK for an LCD to have 2-3 dead pixels and refuse to do anything with it? It is unacceptable in my opinion, as the LCD technologies have been out for a while, as well as Apple's products are usually of very high quality.
I noticed shortly after I bought my Mac last week that I had a stuck pixel. I don't know if it was there when I first turned it on or not, but I have been trying to ignore it, and really the reason is that if people see it, they will think what I have is defective, when it is really only one pixel that I can probably work back awake. I know I have OCD-tendencies, so I was wondering if there are people out there that have a stuck/dead pixel that they are okay with having on the screen! Sorry for the weird post, but I was hoping to find some posters who have gotten over the fact that a pixel of theirs is dead/stuck.
I have only had my Macbook for about a week now and I noticed that when my screen is black I can clearly see a TON of little specks all over the screen.I found out that these are most likely dead pixels or dust under the glass.
1. Is it normal for my screen to have this many dead pixels after only a week of having it? (I bought it brand new from the store.)
So my laptop case has been splitting near the screen and it also seems to swell at random points. I have never dropped my laptop, I take great care with it as I need it for school. Last time I went to the apple store they told me it was a cosmetic issue and id have to pay around $800.00 to get it fixed. This time I decided to call the national apple line. They told me they think it should be taken care of, and that some one was being dis ingenious in the store (did I get screwed maybe because some one's boss told them to stop giving customers replacements? I have no idea). So Now I am taking this to the apple store tomorrow. What do you think I should argue? I think since I have a 3 year protection plan, I should get at least my entire case replaced, if not a refurbished macbook pro/ or an upgrade.
I have received my maxed out MacBook Air last week and did not even think about checking for dead or stuck pixels (not like my led TV which I had to return several times) until this article about Apple's policy was posted on Mac Rumors. That made me curious and I began starting to look for anomalies which resulted in finding 1 dead pixel on the lower left part of my screen. Of course now it is bugging me and I am really thinking about returning it because of the money I have spent on it. Should I call the Apple Care first or go straight to the store? Would they even consider replacing the unit granting they have one in stock?
i am working on my website, and notice a few "stars" on the screen. I thought maybe it was my desktop image, as it is the standard leopard galaxy deal. I verified it was my screen. Will Apple even do anything about this, or will they say it is just cosmetic? I took in my MBP (i bought it 10/08, it is the version before the UMBP) to the genius before because the screen has some lines in it, but they said it caused by the keyboard hitting the screen and they wont fix it because it is cosmetic. I think they should fix it, but at this point, it isn't the biggest deal, but now that i spotted it, i can see it everytime i am on a dark screen/page
Well I had finally received my MBP today and was really excited to finally have it. I turn it on and the first thing I notice is that dead pixel in the lower middle of the screen. Just one freaking pixel.......but I already called apple care and they have a new one shipping out and mine is at a fedex.
For the 15 minutes I did use it though I was happy haha, now the waiting game begins again...
Macbook air from late 2010. 2GB RAM, 1.86 Processing speed. Won't start up, tried all key combinations possible. how to create a battery discharge so I can charge it again? Yesterday it used to charge but was already dead...
Something reasonably priced, so i can take it safely out in the car with me! Also will be looking for a car charger for it!Decided against getting an iPad coz of the limitations so im gonna get a dongle, looked around & I like the look of TMobile deal of ?40 for 90 days.
MacBook 3,1 screen goes dim when charger plugged in. Battery is all but dead. Green light is on on the charger cord connector at computer. Computer turns on then goes dim after a few minutes. Can a dead battery cause this, i.e., is it worth it to get a new battery to try and save this?
When I opened my mac book pro's screen up, I noticed that when i let go of it it physically wiggled. It eventually slowed down and stop but now, even as I am typing it is slightly wiggling back and forth. Does this always happen or did something go wrong in the hinge?
It happens every now and then that the display light of my MBP late 2011 turns off right after opening it and I only can get it back by hitting F1 and F2.
Late Model 2010 Macbook pro, opening screen from closed position allows the screen to turn on as normal, but two seconds later, goes to complete black. Temporary fix includes hitting F1 to lower brightenss (if the screen was at full brightness) or F1 or F2 (if screen was not at full brightness) changing this brightness level brings back screen to full brightness -1. this problem seems to be pretty prevelent and related to the nvidia card ro something simialr. are there any known fixes? will apple acknowlege this. this just started happening to me a week or so ago but i've seen articles are far back as early 2011 with the same symptoms.
Info:MacBookPro, Mac OS X (10.7.2), 2.66 GHz ,i7, 8gb ram, 500gb hdd
I have about 50 *.mp3's on my hard drive that have the file names in all upper case. When looking at them in itunes it drives me nuts....Is there a way to convert the uppercase file name to lowercase? I have googled but can't find anything. I do not want to do it manually, that would take a long time =( thanks, I'm crossing my fingers
I received my new 27" i7 1TB HD on Friday. I was amazed at how fast the shipping was. I'm in the UK and I was told it would be shipped from China and arrive in a week and a half, but instead it turned up from Ireland the very next day! After unboxing it I ran all the tests.. yes, call me a sceptic and tell me I'm looking for trouble! No yellow screen, no grey shadow, no scratches on cds, no dead pixels on photo booth. So far so good. I could swear my Superdrive is making an odd off-key noise when accepting discs, but second opinions tell me it's normal. The Seagate drive can make 'processing' noises every now and then but it doesn't bother me too much. I think in Europe we're stuck with Seagate for 1TB from what I've read here
Every time I go to click a link, or open a new Safari window, nothing seems to happen. No window, links don't seem to work, though they change color as if activated. Did some searching, found that the windows are opening just fine, but opening on a duplicate screen somewhere where I can't see them. Figured a simple restart would fix this, and it did--for about 3 windows. Now it's right back to the same thing. What's the fix? All software/updates are installed/current.
My wife is having an issue with her Macbook. The screen works great, when it comes on. However, 80% of the time, when she opens the laptop, she has to jiggle the screen back and forth to get it to come on. Sometimes it takes several minutes.
Any idea what that could be and what the solution would be? Could it just be a loose connection somewhere?
How can I make it so when one opens up my Macbook physically. It asks for LOGIN/PASSWORD. Right now I have it so it asks for password on startup of the OS, so yeah I basically want it - to ask for password when someone opens up the macbook.
