Our non-unibody MBP is flickering bluish colors on the left half of the screen. It happens randomly, but frequently. It can be stopped by pulling the screen towards me slightly, enough to put tension on the hinge, but not actually moving it towards me. Is this an indication of the faulty GPU or the ribbon connecting the screen?
View 1 RepliesApple are replacing the faulty Nvidia GPU with another faulty GPU...
View 4 Replies View RelatedI have a Aluminum Macbook. It is under Apple care. I took it in today because the bluetooth kept loosing connection and then the Mac says no bluetooth hardware found. The Genius at the Apple Store said they need to replace the screen because the Bluetooth module "may" be behind the screen as it is not on the airport card anymore. Can anyone confirm, in the Aluminium Macbook (2008) where is the bluetooth receiver?
View 3 Replies View RelatedThis is what my monitor looks like when on this screen saver.Not actually that red as I'm typing now though this screen saver really shows it up.url...
Info:
Mac OS X (10.6.8), Logic 9.1.6
Had my iphone 3gs for around 4 months now, it recently stopped turning on for some reason. I've tried everything but when I woke up this morning to turn on my phone it just didn't start... it looks beat up around the edges, is missing the volume button on the side, and has a crack, HOWEVER it has no water damage. The only reason it's so beat up is because I skateboard and I keep my phone in my pocket and for some reason the plastic doesn't hold up too well... The sensor is 100% white though and its not really my fault it broke they just built it .I think they might replace this is if I go and complain about it not turning on and seeing if they can fix it, if they can't hopefully they will give me a new one.
View 4 Replies View RelatedI just purchased Final Cut Pro X. All I see at the top of the window is a little spinning circle. No indication of how much is still left. Is this normal? When I purchase a song on iTunes it gives me a progress bar. How long should I wait?
Info:
iMac 3.06 GHz Intel Core i3, Mac OS X (10.6.8), 12GB RAM, iPhone 3gs, iPhone 4s
I was doing an upgrade of the hard drive in a MBP and unfortunately when I removed the keyboard the ribbon cable attaching it to the MBP's Logic Board came off and I can't figure out how to reattach it. I know it there has to be a way to reattach it but I don't want to attach it wrong and have something short out. How would I go about reattaching it?
View 2 Replies View RelatedUnfortunately I seem to have broken the cable to the top case (keyboard and trackpad) of my older black MacBook 4,1 A1181. A top case from another black MacBook works immediately on the machine, so I know the error is found and I need the top case fixed now. Do you know if it's possible to fix/replace that cable, or do I need to buy a whole new topcase with both keyboard and trackpad?
View 4 Replies View RelatedI want to start modding my macbook and had a few questions. When replacing the topcase, is it hard to re-apply the ribbon that connects the topcase to its connector? And how would I go about removing and re-attaching the screen bezel? Is it difficult?
View 22 Replies View RelatedSo i finally figured out what has been causing all of my kernel panics. Either the brackets or the notches that are holding the second ram stick in place have become faulty. The second ram stick permanently stays in the upright position, and if i do manage to get it parallel to everything, it can jump up at a moments notice if I do something with my computer. This is clearly a manufacturer's defect, but i dont have any warranty left. So i was wondering if any of you guys know where i can get a new ram slot since it doesnt seem to be like it is soldered to the logic board. I had 4gb, now im running on one 2gb stick, and basically the computer is nearly unusable in its current state.
Info:
Unibody MacBook Pro '08, Mac OS X (10.6.8), 2.4 Core 2 Duo, 4gb ram, 250gb
i've been reading about these screen threads, that some of the new macbooks have faulty screens or display, it got me worried because i purchased a new 13" macbook pro ..how would i know if mine is faulty or not ?
I suspect my centre RAM slot (closest to HDD) is faulty or on its way out. Have been troubleshooting a problem and can only replicate it with this RAM slot occupied and the other empty. Error is flash video playback becoming juttery/sticking before continuing. Occasional kernel panic. Has anyone else had this problem before or experienced a dead RAM slot?
Info:
Macbook (early 2006), Mac OS X (10.6.4)
I am a recent convert to Apple products & have a macbook. The hard drive was upgraded with a 500gb drive. Having imported all my files from old pc it seemed to work fantastically well for approx 2 months, then it started to misbehave! It seems that I have a problem with the HD. I have removed the faulty HD and replaced with a spare. All of my data remains on the faulty HD. I have purchased a external drive caddie & have attemted to 'mount' the faulty drive to copy info back onto mac.
Info:
MacBook, iOS 5.1
I bought a brand new MacBook Pro 17" from the Apple Store in Glasgow in June. Lately it's been giving me a lot of freezes and spinning beach balls. Since I just "cloned" my 2 year old iMac onto it when I got it (using Firewire), I guessed it just needed a clean up, as there was effectively 2 years worth of apps, stuff, etc, on there. As I have a full Time Machine backup, I thought I'd do an Erase & Install, formatting the drive first. I did this, and things didn't improve. The next thing I did was use Tech Tool to test the drive. It started off saying "4 hours remaining", but over the next few hours it found dozens of bad blocks, and the remaining time just kept increasing. I gave up and canceled the test at 66 bad blocks and 24 hours remaining and thought "the drive is goosed". I did some Googling and someone suggested actually formatting the drive and zero-filling it, to try write over the bad blocks. I got my Mac Install DVD, booted from it, and ran Disk Utility to erase the drive and do a 7-pass fill. I did this overight last night, took 12 hours on a 500GB drive, and today I reinstalled OS X completely cleanly, not from a Time Machine backup.
So now I have a totally "as new" factory-settings mid-2010 17" i5 MBP. I installed Tech Tool, ran the disk scan again, and it completed in 4 hours and found 22 bad blocks. Apple Store Glasgow have told me it'll be at least 7 days to get it fixed if it is indeed faulty, as they have a huge back log of work. It's also really awkward for me to get to the Apple Store, let alone twice (once for drop off, once for pick up). If I get Apple Care to do it via courier, I'll be without it even longer.
If that's what I have to do, fair enough, but before I do, does it seem to you guys like a faulty drive?
I have a WD 320gb portable hard drive which has been formatted as Journaled for about 3 months. Just yesterday i decided to format the 320gb hd as FAT32 as i heard that Mac disk utility is able to format this type in excess of the 32gb that windows is able too. This now allowed me to have the HD be read by Mac and windows with ease, or so i thought. So i did that, and copied all my data onto it and ever since it has been a bit patchy.. The drive is recognised instantly by windows computers and functions fine but when plugged into my macbook sometimes it will not display at all, other times it will take a long time to read, and in other cases it will function perfectly. When the drive refuses to be read by mac I checked disk utility and it shows that the HD is definately connected but just wont show up on my desktop.
View 1 Replies View RelatedSince day one, my laptop has been a little off. It would crash every once in a while for no reason, but it wasn't very often so I took no notice. Now it's just gotten worse with time and programs crash on a daily basis, and the entire laptop crashes on a weekly basis. I can't open a lot of programs, even ones that I have just downloaded right now for the first time. I gave it to the geniuses and they ran a few quick tests and said the OS and the ram seemed to be fine, so they wanted to keep it overnight to take another look. Two days later, they gave it back to me saying the ram is faulty. So I went home and reinstalled the original ram that came with it...but I still have the same problem. I'm wondering if the problem still could be the old ram and it just really messed up my laptop even though it's not in there anymore...?
Info:
MacBook
Pro, Mac OS X (10.7.4), Formerly had Corsair "Mac Memory"
I have heard that your firewire port can get fried by using certain faulty pieces of gear. It hasn't happened to me, but the thought kind of scares me. Does anyone know if there is a way of preventing this from happening? If it did, would AppleCare cover it?
View 2 Replies View RelatedTo start my computer is a early 2008 Penryn MBP with the 2.4 C2D and a 256mb 8600M. Today I was trying to show something on google earth, but once the app started, I could not control the map, it would just freeze. Once I was able to zoom in, but it would not do anything, it would zoom in on pixelated junk. I tried reinstalling it, but no dice. I thought there may be something wrong with how the data is streaming, but it works fine on my hackintosh and my iphone. This got me thinking about the well-known faulty 8600m.
I have, on rare occasions, had some screwy issues with my display, like some pixelation and difficulty getting the display to work after sleeping, but these have been few and far between. I was curious if all this could be related to the GPU, and if there is anything I can do to test before going to the apple store and complaining how my google earth won't work (I am still covered under applecare). I don't game, so I have nothing of that sort to try out on it. I did download and run cinebench, and it gave me an open GL score of ~9.4fps.
Just throwing out my situation and resolution for any who encounter it (When I MRoogle'd it originally, I saw others ran into the same issue)
Specs: 17" i5 Glossy (Mid 2010) - MBP
Issue: Battery Not Charging
Details: In short, with the power adapter plugged in, my MBP would still show as "Battery Not Charging". The light on the adapter would stay green and not change to orange. While it wouldn't recharge the battery, it did provide enough "juice" for the MBP to run off of.Some of the posts on this forum pointed to this being a faulty battery and to take it into the Apple store. In doing so, the helpful Genius diagnosed the problem as the Power Adapter being faulty, not the Battery.
Resolution:
They provided me with a brand new power adapter right out of the box. In and out of the store within 15 mins.
I recently spilled a little bit of coffee on the corner of my MacBook. It didn't get past the F key and only was about three rows of keys. Less than 1/8 cup.
I immediately pulled the power plug and turned it off.
I left it to dry for a day upside down and turned it on. Everything seemed fine, except that after a little while the mouse started to right click on its own and when I typed, it was a combination of letters and numbers.
Why does the ribbon part of the Reply window get grayed-out when replying to the same person for the 2nd time? It seems to work fine when replying to a unique e-mail for the first time, but upon receiving reply from that person and replying to that 2nd e-mail of his, most of the ribbon icons get grayed-out. Why? I've attached two screenshots for your reference - the first one with non-grayed-out icons, and the second one with greyed-out ones.
View 2 Replies View RelatedI have my macbook connected to my new Dynex HDTV via a VGA cord. My macbook recognizes the display and I have the displays set to mirror but nothing is showing up on my monitor. What do I need to do?
View 3 Replies View RelatedI was doing an upgrade of the hard drive in a MBP and unfortunately when I removed the keyboard the ribbon cable attaching it to the MBP's Logic Board came off and I can't figure out how to reattach it. I know it there has to be a way to reattach it but I don't want to attach it wrong and have something short out. How would I go about reattaching it?
View 2 Replies View RelatedI was doing an upgrade of the hard drive in a MBP and unfortunately when I removed the keyboard the ribbon cable attaching it to the MBP's Logic Board came off and I can't figure out how to reattach it. I know it there has to be a way to reattach it but I don't want to attach it wrong and have something short out. How would I go about reattaching it?
View 2 Replies View RelatedI have a powerbook g4 15" 1.5Ghz. My VRAM is shot and my computer keeps on going into panic mode or gets hot and just stalls and I have too reboot manually. I just purchased another logic board off of ebay, yes I'm a very brave guy, I installed the new/used logic board and I now see that the ribbon cable recepticles for the keyboard and finger pad are not on the new logic board. Obviously I bought the wrong board. Is it possible to still use it somehow like buy a new top plate or buy an external keybord? The top plate I have now has the fat ribbon cable and also the small one. Can I just get the proper cables? If so which ones are they?
View 2 Replies View RelatedMy precious! I dropped it on a cement floor and it landed on the corner. Now, the screen on that side of the MBP is separating from the aluminum clamshell it is connected to.
View 4 Replies View RelatedMicrosoft on Thursday detailed some of the new features in its forthcoming Office for Mac 2011 suite, including co-authoring tools, Web apps, and a redesigned ribbon interface more consistent with its Windows counterpart.
Microsoft is a part of Macworld 2010 expo in San Francisco this week, and has used the event to divulge details on its forthcoming update to Office for Mac, expected to arrive later this year.
"Together with your team -- officemates, family or classmates -- you are part of the community that helps shape each version of Office for Mac," said Eric Wilfrid, MacBU general manager at Microsoft Corp. "You�ve told us that working together across platforms is a priority to you and that�s why we are making Office for Mac 2011 the best, most compatible productivity suite on the Mac."
Pricing for the new version has not yet been made available, and a company official told Mary-Jo Foley of ZDNet that Microsoft is looking into support for the forthcoming Apple iPad, though it has nothing to announce at this time. Apple will sell multi-touch versions of Numbers, Pages and Keynote -- part of its competing iWork suite -- for the iPad for $9.99 each, and Pages will allow users to save documents as Microsoft Word files.
Microsoft revealed Thursday that the co-authoring tools in Office 2011 will allow multiple users the ability to work on files from Word, PowerPoint or Excel from different locations. The Presence Everywhere feature gives real-time updates on who is working on the document directly in the application.
Microsoft Web Apps can also be accessed from within Office 2011, allowing users to share Office documents from any machine with an Internet connection.
The addition of a ribbon layout to Office for Mac hasn't completely rearranged the design users have become accustomed to, Microsoft said. Instead, it gives "the best of both worlds" by using the classic Mac menu and Standard Toolbar.
"Together these tools make it easy to find and discover new and frequently used commands," the company's press release said. "In fact, more than 80 percent of the most used features live in the default view of our new user experience so you don't have to waste time finding the tool you need."
The company also previously announced that it would include a brand new version of Outlook built as a Cocoa application from the ground up for the Mac platform. The company has said its new Outlook will make the application attractive, give it high performance, and integrate it with the Mac OS X operating system.
Microsoft also announced Thursday that Outlook for Mac would allow importing of .PST files from Outlook for Windows, which it said was one of the top requests from customers. The new Outlook will also allow Spotlight search and backup support from Time Machine.
I just broke my mighty mouse today accidentally, I was just trying to fix the little ball inside of mouse. It was really HARD to open my mouse, I hate apple for making this product the wrong way. I notice once I finished cleaning the inside that I broke the ribbon off I don't know when it happened. Is there any way to fix this green ribbon strip its been cut in half? The green strip connects to the top part. The mouse does still work for 1 st left click but not right click or the sides. I wish I never done this in the first place. I have tried connecting the the ripped green strip by a piece of tape, but doesn't seem to work at all. Here is picture of the green strip my talking. This picture was found on the internet. [URL]
View 2 Replies View RelatedEvery time I close my MBP screen I have to re-enter my WEP password for my wireless network. This is very frustrating and I'm not sure if it is just an issue with keychain or if it is something else. If it is keychain I have no idea how to fix it as I have tried everything I know.
View 2 Replies View RelatedPrior to this update I could drag an album into my iPhone then drag another and it woud simply add those songs to the list being loaded. Not anymore! Now iTunes stops loading the first album, thiknks for a bit and loads the second drag. Utterly useless! I usually drag a selection of purchased and other songs in every couple of weeks for my daily commutes with this 'new' setup it would take a week to drag in a playlist coz I have to wait for every album!
Info:
iPhoto '11, Mac OS X (10.7), imac 24' 2.8 core 2 duo 4GB Ram
