MacBook Pro :: Getting Support For Hp Scan-jet 5300C?
Feb 22, 2012Is there support for hp scan-jet 5300C?
Info:
MacBook Pro
Is there support for hp scan-jet 5300C?
Info:
MacBook Pro
I have PowerMac G4, 1.25Ghz PowerPC, 1.25GB Ram, OSX 10.3.9 and want to use my HP 5300c scanner. I installed the HP Image Zone Ver 9.1.2 software that at least on the surface seemed to install the drivers. I am able to see the device on USB through both System Profile USB and Tech Tool pro 4. I suspect an HP driver installation problem or incorrect Driver /compatibility issue. How to verify the correct installation of the drivers, where to go to ensure that I have the correct drivers. There is no way to download software directly from HP, only through oexternal links into the HP site. If anyone knows of the correct links for the 10.3.x drivers, or have any other suggestions as to what they have done to get their HP ScanJet 5300c to work with Power PC G4 with OSX 10.3.x. I last used the HP 5300c with my iBook G3 under OS9, though that was a pain due to CP conflicts - Luckily I still use conflict catcher - and now I need to use it with the G4 under OSX.
View 1 Replies View RelatedDid a ClamXav scan just now and came up with three detections. All three were classified as ISHING.HEURISTICS.EMAIL.SPOOFEDDOMAIN". I deleted the files immediately.
View 12 Replies View RelatedIs 'mac scan and sweep' OK to use on my Macbook?
Info:
MacBook, Mac OS X (10.6.8)
My computer seems okay, but it has been a little off lately. I don't think anything is wrong, but to be safe, I want to see if i have a virus. Also, it may be a good idea to scan my computer for virus' every once and a while.
Info:MacBook
How do I scan and add my signature to the middle of a contract sent as doc?
Info:
MacBook Pro, iOS 5.1.1
how to scan documents?
Info:
MacBook Air, Mac OS X (10.7.4)
On my PC i would have to defrag the hard-disk and scan disk from time to time to fix problems.... do I need to-do anything like that on my macbook?
View 2 Replies View Relatedis there a way to run Drive Genius on Mac Air? The MA is getting slower by the day and I saw the same symptoms right before my iMac's HDD crashed. I want to run a HDD scan but Drive Genius requires that I scan a non boot drive. Since Target mode is not an option, I am out of ideas.
View 4 Replies View RelatedHow do i get my apple care set up on my macbook pro when i cant scan or fax my proof of purchase away to apple??
Info:MacBookPro
I have old film slides (2X2) and I was wondering if I can scan them and how. Is there a device I need to buy?
Info:
Mac OS X (10.6.6)
how can i scan photos by hp scanner
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm running a virus/addware/etc. Scan on my Macbook, with Norton (yes I know some of you hate Norton but thats what I got back in the day so its what I'm using) and the scan keeps stopping about half an inch from completion and just sitting there. The computers fans start to run like its working too hard or something and it will not go any further. It has stopped with around 49946 files left three times in a row now. What's going on? I have tried to delete the file it keeps stopping on then it just stops in the next in line. I just got Leopard and don't want to install until I know my system is ok. On a side note what Anti-Virus is best for Macs?
View 7 Replies View RelatedI've been using ClamXav for a couple years, but after I updated my software to Mac OSX 10.6.8, it doesnt run properly and quits everytime I try to start a scan. I've uninstalled it & reinstalled it a few times & added a quarentine folder, but am not sure what to do at this point.
I've been looking around at different support forums to try to identify a solution, but am not having much luck-
Info:
MacBook, Mac OS X (10.6.8)
How do I scan my mac book pro for viruses and malware?
Info:
MacBook Pro, iOS 6.1.4
I have a hp deskjet f4280 and when I am trying to scan from my MacBook Pro Mid 2010 (MacBookPro7,1) the scanner and image capture app froze... I was observing the issue carefully and I think it is due a problem with the "HPscanner.app" When it is working on the preview it freezes and state at 99.8% of use of the processor.... The problem is only in this computer. I have another mac, MacBookPro8,2 and it scans properly and without any problem.
View 4 Replies View RelatedI can't scan with my wireless canon 5300 mg printer and there is no scan option in my printer window.
Info:
iPad, iOS 4.3.1
It's been running half an hour. How long it'll take in total? I'm not a huge fan of leaving my Mac on overnight but I will if I have to.
Info:
MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9.2)
I keep getting this message when attempting ton restore my Samsung SSD on my 2012 MBP. I've got a .dmg image its all my data on it and I'm just trying to get it from my external hardrive to my internal 3rd party SSD.
Info:
MacBook Pro, OS X Mavericks (10.9.5), Samsung SSD 850 Pro w/ 2 OWC 4GBram
Like the title states. i have a 256 GB Apple SSD and i wanted to run techtools to see if everythign was up to par. i wanted to know f a surface scan will harm or is even necessary?
View 2 Replies View RelatedI have an HP printer and I can't use the scan option because it doesn't show up on my computer. ANd when I try it from the printer it gives me an error window.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I have a mac os x 10.7.4 connected to a photosmart c309a. I use the mac drivers to scan document. Everything is updated and working fine. However, I would like to scan a document, copy it to word, and edit. How can I do this?
Info:
MacBook Pro, Mac OS X (10.7.4)
So I had a recently purchased 17" BTO with the 7200RPM drive that worked great, but with one issue - the display would have horizontal scan lines and black out occasionally. So I called up Apple and eventually managed to get a cross-ship set up(they let me hold on to my current unit, charge my credit card and send me a second brand new 17" unit as a replacement,and then refund me for the second 17" after I send back the defective unit).
Anyway, the replacement unit looks great, but with one issue - there's a very small light dent on the bottom panel(maybe about the size of a dime). I was annoyed but don't think this is worth having to exchange, since I could probably just unscrew the panel and pop it back into place.
However, what really got to me was the fact that my replacement unit was slightly louder than my original - my original is so silent that I can't even tell it's on. However, with my replacement unit, I can hear the hard drive spinning, which is slightly annoying.
Anyway, I proceeded to restore from a time machine backup and test my replacement unit when I noticed that it would occasionally get the hard drive click + beep + freeze issue that many others who have the 7200 RPM drive seem to be facing. It's extremely annoying, and more importantly I miss the complete silence of my older unit.
My question is, while I'm still in possession of both units(which both have the exact same specs, same 7200 RPM drive, etc.), should I simply just open both up and take the silent(good) hard drive from my old unit and put it into my new one?
The click+beep freeze issue is really pissing me off, and my old unit didn't suffer from it - it's just this replacement one(doesn't make any sense).Anyway, would notice if I switched the hard drive? Would I get screwed somehow? Do they keep track of the hard drive serials or something?
I really don't want to go through the pain of sending this back, especially considering that a LOT of people are suffering from this issue, and I don't want to end up with another defective drive. I'm sick and tired of games and just want a computer that WORKS.
I have installed printer drivers for my Brother printer and I can print ok but for some reason the printer will not connect to my iMac to scan. Never had this problem with my PC.
Info:iMac
I just bought a new Macmini & i cant get my Canon Scanner N676U to work, it worked perfectly with my old macmini ?
Info:
Mini Mac, iPhone OS 3.1.3
I am new to Apple. What is the Equivalent for Apple in terms of Anti Virus, disk deframentor and scan disk.
Info:
MacBookPro, iOS 5.1, OS IS LION
I upgrade my MBP(C2D 2.4GHz,Late 2008 MBP) to 8GB RAM(4GB X 2),and the system is stability as ever.The official said the maximal memory it can support is 4GB,and many people said it can support 6GB.
View 11 Replies View RelatedAnyone able to recommend how much and what type of RAM i will need for my 2007 macbook pro 1,1. 1.83 Ghz processor speed?
Info:
MacBookPro
Since it is broadly acknowledged that there are no viruses for Mac (at this time) so what then is iAntivirus looking for when performing a scan?
View 4 Replies View RelatedI was browsing the net for a bit of info and I clicked on a link - all above board I am just searching for info on an old friend.a small window appeared from a site called antivirus.net (or something like that) saying I was in need of software or a scan or something. I clicked CANCEL and found myself on a site "mg7a.info" that looked like a Windows desktop with a scan running (this listed in my history as "my computer online scan").
View 6 Replies View Related