I have an issue with my MacBook Pro (2009) model.
When I'm connecting CD-ROM (internal one) computer doesn't want to boot nither from DC ROM nor from HDD.
As soon as I am dissconecting CD ROM system is booting up without any problem.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I am using my HP DeskJet F4500. I connected it to my MacBook Pro 13inch mid 2012. i Added it and then i tried to print something out it doesn't print. I've went to the printer queue and i found nothing. I really need to print stuff for my homework and projects.
Info:
MacBook Pro (13-inch Mid 2012), OS X Yosemite (10.10.1)
1. tried deleting Airport and then re-adding then clicking apply. Worked the very first time I tried this and it has only worked twice since.
2. tried allowing all incoming connections, worked once now problem still persists.
3. Tried re-starting router, this has never worked
4. There was a post about deleting a file, the person said they were instructed by apple care to do this, that didn't work either.
- Seems to only do this when the computer is on sleep mode
- everything else in the house connects fine to the internet
- this problem does not only happen in my house, it happens at coffee shops etc
- sometimes it is able to connect via tethering off my iphone
- this was a problem 2 years ago on this computer, then it was fine for 2 years and now it's back!
Info:
MacBook, Mac OS X (10.5.8)
My MacBook Pro 13" (Mid 2010) doesn't go to sleep, when I close the lid or when I try to activate sleep under the Apple menu. I haven't changed nothing in the system preferences. I already tried the following: unplugged all USB devices plugged and unplugged external display closed all applications (except of Finder of course) resetted all energy saving preferences deactivated bluetooth checked share options (everything is deactivated)
Then I unplugged it from the power supply and after I closed the lid, it went to sleep. Then plugged in power supply again and sleep didn't work.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I have a 17' MacBook Pro and when I connect my PNY 8gb USB it does not recognize it. It only recognizes it if I boot the Mac with the USB already connected.
View 3 Replies View RelatedI recently was forced to restart my 13" MacBook Pro with Lion OS. After the standard start up sound and gray screen the startup ceased. After multiple failed tries and attempts to use command-r I removed the hard drive and connected it via. a SATA to USB2 connector. I'm assuming since I can work off the HDD because of the USB adaptor it is not a HDD error but something else. Would a new HDD solve the problem?
Info:
MacBook Pro, iOS 5.1
I bought a MBA 13" last month and now I'm trying to connect an external monitor through a Mini Display Port-to-HDMI adapter and most of the times the display shows a message "No signal detected"...
I've tried all the possible combinations between the MAC and the Monitor but it would seem a random matter.
Info:
MacBook Air (13-inch Mid 2012), Mavericks 10.9.4
I experience this problem for 2 days now. The wi fi says it is connected and all the bars are full but id doesn't load a single page!
The internet i've got is vergin so normally is very fast.Downstairs where we have a desktop computer connected to the D-link is working as normal.
When I open the network diagnostics in mac it shows : wi fi is green , wi-fi settings is green, network settings is failed(red), ISP failed(red), Internet failed (red), server failed red.
Info:
iMac (21.5-inch Mid 2011)
I just purchased a WD My Book 1TB external drive for my intel iMac and I decided to connect it via Firewire. I have another that is connected by USB and when I shut down the Mac the hard drive also shuts down, but with the new one connected via Firewire it doesn't and the light remains on! Is this right? Should the light remain on? Is it a problem for the harddrive to be constantly powered? [URL:..]
View 8 Replies View Relatedmy old 2x2Ghz PM G5 (late2004) doesn't launch the boot sequence:
- when pushing power button, the blue led turn ON as long as I keep it pushed. If not pushed, it light off but yet the fan are running.
- no chime
- the fans turn on normally and the hard drive start a little to make noise once powered up.
- no video on display, the screen is black.
- the keyboard is not recognized anywhere I plug it.
- after a minute or two of non activity, the fans start to blow full speed (guess its a security measure for saving processor)
I ve done the reset of PMU several time (unplug the power cord then push the button at bottom of mother board)As i dont have access to keyboard, I can't start on Target mode to check if the HD is failing all.I ve removed all RAM extensions and left only one pair in slot 1 (J0), and changed the pair to avoid a faulty RAM.I only have a redlight on motherboard if I don t put back the glass panel.I ve check the voltage of the lithium battery, and yet its the original, the voltmeter says its 3,6V...
I have upgraded my mbpro with an SSD and After ist it doesnt Boot?
Info:
MacBook Pro, Mac OS X (10.7.4)
I just installed the Corsair VSA4GSDSKIT667C4 G 4GB into my MacBook MB403LL/A and it will not boot! I tried to install and re-install 3 times and I can't get it to work!
View 10 Replies View RelatedI am using a 15" MacBook Pro Santa Rosa (mid 2007), 2.2 GHz Intel Core 2 Duo, 6 GB memory, with a 240GB OWC Mercury Extreme Pro SSD (15 months old). Lion 10.7.3. Computer doesn't boot into Safe Mode AND also if it "goes to sleep by itself" (I don't touch it for a while, then it falls asleep) after some time when I try to wake it up I get the Spinning Ball of Death or a black screen and the only thing I can do is press the power button for some seconds to power off. It wakes up OK if I, either close the lid or Apple icon-> Sleep.
WHEN TRY TO BOOT INTO SAFE MODE: Immediately after the startup chime I press the Shift key, after 2-3 seconds get the login window, key in my password. Instead of logging in, it goes to a screen with the Apple icon, underneath it, the Apple spinning gear and underneath that a loading bar. After quite some time the loading bar disappears, the gear goes on spinning for a LONG time, then black screen, startup chime again and login window. Then, when I key in my password, it just logs in as usual, no safe mode.
I tried to write in Terminal “sudo nvram boot-args="-x"”, BIG mistake! It got my computer into a loop of those screens. I don’t exactly remember what eventually got me out of this loop (I think I booted from a clone, then started with the Lion CD and wrote back “sudo nvram boot-args=""” in Terminal. Also set up an additional administrator account but all was the same. Tried verify/repair disk, everything OK. Eventually I erased completely the HD (not Recovery HD) reinstalled Tiger, Snow Leopard and Lion again, downloaded all applications/software/programs I had, from scratch and only copied the data from a backup, being sure that after that all problems will be over, but... everything like it was, no "normal sleeping" and no SM booting.
Info:
MacBook Pro, Mac OS X (10.7.3), 6 GB Memory 240 GB OWC ME Pro SSD
I recently had to take my mac mini to pieces to upgrade its RAM to 2GB. I initially had problems with booting up - it would get to the white screen with the apple logo and think for about 2 minutes then restart and repeat the process indefinitely. I managed to fix this by removing the clock battery for a while. I also zapped the PRAM after installing. But now, the strange problem is that OS X wont boot up (it will get to the white screen, think, then restart) if my firewire devices are connected. In case this helps, I have two HDDs and a DVD burner connected in daisychain to the firewire port. It definitely boots up fine with any other peripherals/connections. Once OS X has booted successfully, I can then connect my Firewire devices which seem to work fine.
I have tested my new RAM with memtest and rember and everything seems fine. After upgrading my RAM, I would also get two alerts on start up - "Do you want the application "configd" to accept incoming network connections" and "Do you want the application "mdnsresponder" to accept incoming network connections ". I have fixed this problem with the help of this post: [URL]. Aside from the horrible idea that I have damaged some hardware, does anyone have any clues as to how I can mend this? A wise colleague of mine said that if it was a windows machine, he would look at the BIOS settings as he thinks my computer is trying to boot from one of the HDDs, and that I should try to find a list of boot drives and remove the firewire HDDs if they're on it. I know macs don't run BIOS, but is there anything similar I could check?
I have a new Mac Mini connected to an older VGA monitor using the Apple brand VGA adapter. The mini is fully up to date and runs perfectly when booted. However, if I reboot the mini with the VGA monitor connected, it fails to boot. I just hear the faint chime sound every other second. There is no output to the monitor and the only way I can get it to boot is to disconnect the monitor and then power cycle the mini. I can reconnect the monitor just seconds after powering back on and it finishes booting properly.
I've also tested with an HDMI connected monitor (without the VGA adapter) and it boots just fine and the display works properly.
Info:
Mac mini, Mac OS X (10.7.4)
White screen on start up, doesn't boot.
Info:
MacBook Pro, Mac OS X (10.7.3)
I have late 2011 13"Macbook Pro with Mac OS X Lion 10.7.2
After i update it to 10.7.4 it restarted and shutdown , i open it again only apple logo appeared for 1 min then it shutdown .
Info:
MacBook Pro, Mac OS X (10.7.4)
My Mini Mac (early 2006) was working ok till 2 days ago when the boot times went into the 4 minute range with the USB CD printer from primera pluged in. I check the firm ware on both devices and they are current.
Info:
Mac mini, Mac OS X (10.4.11)
I installed Boot Camp 1.3 so I could run Windows XP on a partition (use it for music); no problem. Set up my Motu Ultralite on the OSX side, no problem.
HOWEVER: The Motu UltraLite doesn't work on the XP partition, at all. It shows up, but no audio can be routed through it. It's a firewire audio card, if you're not familiar with it.
Been troubleshooting this one awhile...I even did an Archive and Reinstall....my Ethernet port on my 2.16Ghz MBP won't connect to anything. I get an IPv6 address when plugging into a router, but DHCP never works and a manually assigned IP doesn't work either. Reboot into Windows and it works fine...I've tried removing the Ethernet port, and have futzed with all the settings trying to reset it, but no dice. Problem started somewhere around 10.4.9, I think...I'm on 10.4.11...I reinstalled to .8 and worked my way back up...never works.
View 7 Replies View RelatedMy Macbook will not boot up. I am now faced with a plain grey screen with no apple logo, chime sound or activity wheel appearing.
Like most Macbook users I know, I rarely go through the booting up process from day to day use unless the System Updater requires a restart, but this time there was a different reason for me restarting the system.
When I was expanding an archive with Stuffit Expander, the app froze up. I went and deleted the archive file knowing that it was corrupt, but I did this too soon before the app had a chance to close down properly. It became stuck as a process that couldn't be closed down. Its dock icon didn't have a 'Force Quit' menu option so, I chose to perform a restart.
The Macbook went through the startup process but took a very long time. (I guess after reading around the forums this was fsck attempting to scan and repair the potentially damaged hard drive). I mistakenly performed a hard reboot thinking the system had hung.
The second time, it displayed the apple logo and wheel for about 2 minutes before showing a circle with a line through it and no further activity. When I rebooted again the apple logo and wheel were displayed with the hard drive activity audibly in a repetitive on and off state. I left this for about 15 minutes before deciding to turn it off. At the present moment it starts up to a plain grey screen as mentioned at the beginning. I tried experimenting with removing the extra 2gb memory module but there was no difference with or without it. I tried resting the NVRAM with Option-Command-P-R but all I got back was the startup chime (i.e. the muted volume I had it at has now reset to the default level).
When Option is held down on booting, the mouse cursor is visible over the same blank grey screen. No volumes show up. I have selected the Finder Preferences option to hide all volumes from showing up on the desktop, but I doubt this would affect volumes from showing up on the boot up screen.
I have tried booting from the 10.4 CD that came with the Macbook and the 10.5 (retail) DVD. The 'C' or 'D' keys do not have any effect either.
I think my options now are either to try and obtain a firmware reset CD which might make it possible to recognise volumes again, or there's the possibility that I'll have to get a new hard drive. Can you suggest anything else I might be able to try?
On the subject of hard drives, if it turns out that the Macbook's hard drive is beyond repair and I need a new drive I only have a caddy for 3.5" PATA drives which I use for Time Machine. With an appropriate 2.5" SATA caddy is there any way I could access the filesystem in Windows? How else could I format the drive to the correct FS?
On start up the white screen of death and a flashing file icon with ? is all that happens.
Have reset PRAM and SMC
Boots perfectly from external drive
Internal drive is ok, in fact I have tried two different drives both of which are working perfectly.
Doesn't start in Safe Mode
Starts in Single Use Mode
A1278
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): 7303202H66D
Hardware UUID: 00F60032-5E52-52B1-8945-D6BC7F175795
Snow Leopard 10.6.8
Info:
MacBook Pro, Mac OS X (10.6.8)
There's some known documented issues concerning the Nvidia graphics chip in the particular model of macbook pro I have.
Basically when turning on the machine, the screen is filled with black & white horizontal strips like a piano keyboard, but thats it - it doesn't actually boot up fully at all, you cannot hear the hard drive running !
Would the hard drive have anything to do with this ?
I explained this to apple telephone support & they informed of the article
[URL]
[URL]
& stated that the symptoms were linked.
On taking the mac to an apple store they ran a special 'firmware' boot up 'test' using an instore ipod to determine if it was a faulty Nvidia chip, so as to prove to Nvidia, the company funding the repairs whether it is that to blame.
Because the machine didn't even boot up & complete the 'test' they couldn't say whether it was the graphics chip - so 'no free repair' under extended warranty & the final answer was as usual ' buy a new logic board' that will cure it !
I'm having big problem with my notebook.
It goes down after the gray start video.
Doing the fsck this is what comes out...
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
I tried running the disk utility. It finds the hard drive but wont let me verify/repair permissions (the option is grayed out). It will only let me verify/repair the disk, but it finds no errors. The installer cannot find the disk at all.
We have more than one hard drive in the G4's and the target disk mode will only mount the system drive, it doesnt see the others, so we cannot retrieve out information. Whats going on. Never had this problem before.
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
It says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies View RelatedA while ago, I got hold of an old Power Mac G4 (450MHz, 128MB RAM, OS X10.3) which I haven't dug out until now. As it contains the old owner's data, I thought the best thing to do would be to do a clean install of Tiger. I bought a Tiger DVD set and upgraded the RAM to 1GB but the DVD won't boot. The DVD is mounted in OS X and I can access the launch screen which has a button to restart and upon restarting, OS X just boots again.
I have tried pushing C and Alt (I have a Microsoft Bluetooth keyboard as the Apple one has been misplaced - Could this be the problem?) but nothing appears on the the display for a while, then OS X boots. I have also tried setting the Startup Disk to the Install DVD which doesn't work either. I was also thinking it could be the DVD-ROM drive as the button to eject is in the center whereas the drive's eject button is on the right (so I am guessing it isn't an original part)
I'm attempting to install several PowerMac G5s with the same image. All the PowerMacs are the same vintage, and two of the four seem to work just fine. The other two have the same issue.
I created a model machine that's suitable for cloning: installed and updated all necessary software, configured system settings, and then used Disk utility to copy the model system to a read-only disk image. I then used the Disk Utility application to prepare the system image for deployment by Scanning the Image for Restore.
I then restored the image to hard drives with Disk Utility. I placed in the four HDs in the PowerMacs. Two of the PowerMacs booted without a problem, the other two won't boot to the restored image. I tried holding down Option key when booting, and option to boot to the drive never shows up. Also tried resetting the PRAM, but that didn't work either.
Info:
MacBook, Xserve G5, PowerMac G5, Mac OS X (10.5.8)
Hoe to recover the OS X 10.5 when the Mac doesn't boot (only questionmark and folder on screen)MacBook Pro mid 2009?My data is safe luckily?
Info:
MacBook OS X (10.5)
