I installed Boot Camp 1.3 so I could run Windows XP on a partition (use it for music); no problem. Set up my Motu Ultralite on the OSX side, no problem.
HOWEVER: The Motu UltraLite doesn't work on the XP partition, at all. It shows up, but no audio can be routed through it. It's a firewire audio card, if you're not familiar with it.
Been troubleshooting this one awhile...I even did an Archive and Reinstall....my Ethernet port on my 2.16Ghz MBP won't connect to anything. I get an IPv6 address when plugging into a router, but DHCP never works and a manually assigned IP doesn't work either. Reboot into Windows and it works fine...I've tried removing the Ethernet port, and have futzed with all the settings trying to reset it, but no dice. Problem started somewhere around 10.4.9, I think...I'm on 10.4.11...I reinstalled to .8 and worked my way back up...never works.
View 7 Replies View RelatedIt says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies View Related I got Mac Mini and i installed Windows 7 on it with Boot Camp, After i installed drivers and everything. Everything worked includes the Magic Mouse. After i did a restart my Magic Mouse didn't work anymore. I tried turning the Mouse off and on and it still doesn't work.
I try to connect my soundcard motu 896 MK3 to the firewire plug and my computer doesn't recognize it. When i check on the apple menu/about this mac/more info/firewire it says that it can't figure out what hardware is connected. If i plugg another device through the same firewire plugg then it works.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.2)
After my other thread and a bit more research I have decided that Boot camp will suit my needs the best.My next question, which Version of Windows will work the best on the MBA. I know 100% that it won't be Vista. But cant decide between Win XP or Win 7.
View 14 Replies View RelatedJust got a new MacBook Pro 13". Running bootcamp with Windows 7. The headphone jack does not work - no volume at all. Has anyone seen this issue and how did you solve the problem?
View 3 Replies View RelatedI've been trying to install the latest update (2.1) to Boot Camp via software update without success. Windows refuse to complete the installation. Does anyone have experienced the same problem?
View 11 Replies View RelatedBoot Camp Manager doesn't startup
View 2 Replies View RelatedI downloaded the 2.1 update for Vista and when i try to open the .exe in Vista i say agree to let the program open and then it just doesn't do anything.
View 20 Replies View RelatedI installed Windows 7, 64 bit to another partition. I let it do its update thing. When moving on to installing Boot Camp from the Mac OS DVD however things failed. I heard that if things does not work out as promised I would have to download the Boot Camp 2.1 64 bit version for windows vista from the apple website, so I did. This didn't change anything however. The OS as a whole works well as of now but there's no support for any of the hardware such as hotkeys, camera and multitouch. I've also noticed that the sound drivers don't work properly and I'm stuck with a red light in the earphone jack, together with no sound. This goes even AFTER installing the latest drives from Realtek's website.
Lastly, it also seems that my graphics drivers are not working that well. The other day I was trying to play Plants VS Zombies but the whole game was very pixlated, nothing like it should be. The game itself does not have any settings for changing this.
So in short this is what does not seem to be working:
- No support for the hardware such as isight camera, hotkeys, multitouch etc.
- No sound.
- Graphics not as good as they should be.
For those who have installed the Boot Camp 3.0 drivers does it resolve any of these problems with the 2009 Macbook:Low volume output from speakers, Optical output red light always on, Keyboard backlight won't turn off, Microphone not working, Left speaker louder than right speaker
Other than the ability to access your Mac drive does Boot Camp 3.0 add anything that would make it worth the upgrade?
Finally got my Sapphire 5870 Vapor-X hooked up to my 2009 MP... and been trying to get it set up so I don't have to pull the old GT120 GPU out of the PCIe slot every time I want to boot up in Windows Vista x64 on the 5870. The GT120 still boots up beautifully to OSX with the 5870 in, but I can't seem to get the 5870 as default on WinVista64. My guess is it has something to do with the EFI, as I get the gray "pre-apple" screen when I boot with the GT120, but not with the 5870. The 5870 only starts to send out a signal once the Windows loading screen shows up.
I'm trying to completely (or at least effectively) disable the GT120 in Boot Camp/Vista x64.
Is it even possible without a BIOS?
I've already tried disabling the GT120 "Display Adapter" under Device Manager.
I know the Boot Camp drivers that are shipping with the latest Mac Pro includes 64-bit drivers for Vista, but I was wondering if anyone has tried to see if they work on XP x64? That's the 64-bit Windows version I have on hand and it would be nice to get it to work. I don't suppose the drivers that shipped with the MacBook Air are any newer?
You would think that Apple would jump to support XP x64 given the commercials about people switching back from Vista to XP.
The new blue tooth key board does not work in windows 7 boot camp, Windows cant locate the divice... New iMac blue tooth key board does not work in windows 7 boot camp!
View 4 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
I was trying to boot up from my Snow Leopard disc last night to run Disk Utility (to repair my hard drive). I pressed C while starting up but it took me right to my login screen. I did this several times, no luck. I'm using a 15" MBP btw.
I also tried the same thing on my sister's MacBook (using her own install disc) -- same thing, straight to login screen.
I know pressing C used to work before because the MacBook used to belong to me and I did an erase & install before passing it down to my sister.
Powebook G4 won't boot up. Safe mode doesn't work. Reset pram. Went onto single user mode. At first there was a modification and then I ran it a second time until it said HD was ok.
View 12 Replies View RelatedIs it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
So i installed windows 7 on my macbook (not aluminum) and when i go to install the boot camp drivers off of the retail leopard CD i get an error that says that I can't because it only installs on vista or XP. My laptop came with Tiger CD's so i can't get them off of there.
View 1 Replies View RelatedI was able to get Windows Vista 64 running on my 17" MBP, it is pretty slick. I set aside 32 GB for Windows, ran the install, loaded all the appropriate Boot Camp drivers and everything is working perfectly in Windows. I boot back to OS X to attempt to configure Parallels...
So I fired up Parallels and follow the guided instructions. However, when I get to step 2 Im not sure what I should be doing. I already have Windows on its own partition, but Parallels is asking me for a CD/DVD image. Im a little leery of putting the Win disc back in, I dont want Parallels to always want to boot from the disc. how do I tell Parallels to load Windows as a Virtual Machine off of the Boot Camp partition?
The partition Boot Camp created now appears on my Desktop in OS X as Untitled, I can not, for the life of me, figure out how to change that. If I eject that volume will I still be able to Boot to Windows? Will Parallel still work?
So I finally got Windows 7 64bit installed on my MBP 2.33 machine.
However, from the guides, I should just insert my leopard disc and it should run. This is the thing, I don't know where my leopard disc is (i've been moving a lot lately due to being unemployed) and its either lost or packed away somewhere. I have a backup copy on my time machine drive and haven't tried that yet. I downloaded a 2.1 extraction and burned it to CD though. I inserted the CD and I can see in windows 7 three applications. One is Windows XP, the others are Windows Vista 32 and Windows Vista 64. I click the Vista 64, but nothing happens at all, and no drivers are isntalled.
I have been trying to install Windows 7 X86 RC1 on my brand new early 2009 iMac and have been having the same problem every time.
Initial installation goes very smoothly, but all the trouble begins when I load the Boot Camp setup.exe from the Leopard disc.
During Boot Camp installation I get a compatibility warning about some of the Apple Boot Camp drivers working correctly with this version of Windows.
If I go ahead with the installation then what happens is I get a BSOD and then Windows becomes un-bootable. This is repeatable as it happens every single time I do the installation.
Things initially seem to work up until I load boot camp assistant from the Leopard install disc, so I'm wondering if there are other drivers available that play well with Windows 7 for my iMac that I can try? I've followed several Boot Camp tutorials for iMac with Win7 and am pretty sure I am doing everything correctly, but things just aren't working.
I want to know if anyone can identify compatibility issues with this set-up, it's for architecture school and it is very important that it works.
17" Macbook Pro 2.8Ghz
8GB RAM
128GB Solid State Drive
Here's where it gets confusing:
through Boot Camp 3.0, run Windows 7 Home Premium
run AutoCAD 2010
run 3Ds Max 2010
run Revit Architecture 2010
(Each of these have well-documented problems running in Boot Camp regarding broken licenses, however, no information I can find since 2008 identifies issues. Autodesk's website does specifically say each of these products are supported on OSX through Boot Camp.)
I will be saving all files to either an external HDD (these also have been documented to cause problems concerning the license in Boot Camp, I am presuming that since Autodesk now supports Boot Camp, this issue has been/will be resolved through Autodesk) or a networked storage system at the university.
OSX will be used primarily for using Adobe CS4 Design, OpenOffice, and internet browsing. Basically, pleasure use with a minimum of curriculum-related applications (except for CS4).
ive been using my clean win7homepremium install for about 4 weeks now. i have the video card working nicely and all seems to be well, i play modernwarfare2 on it and it is all good... however (there is always one..)
the mic doesnt work... it seems to be recording but at a super low volume. i check win7 sound control and the recording is set to 'microphone' but no dice. i turn up the boost and volume to full and tap the mic on top of the display and i get 3 green bars...
i was hoping the 3.1 updates would fix it, however i cant get anything to install... its like its an update for vista, not an update for people already running windows 7.
I want to install XP using Boot Camp but when I run the Boot Camp Assistant I get the following message
Boot Camp Assistant can not be used
You must update your computer's Boot ROM firmware before using this setup assistant.
Now I have tried all firmware updates available on apple site but they say they are not needed, I'm on 10.5.6 and a friend of mine with same firmware runs his boot camp comfortably.
My Boot ROM Version:MB21.00A5.B07
SMC Version:1.17f0
my laptop (macbook pro) doesn't turn on, because the battery doesn't work (may be because of moisture), and the 7 battery lights on the left side are off, and when I plug the charger in, the light on the magnetic socket turns on so dim ..
Info:
MacBook Pro, Mac OS X (10.7.3), MC 700
I have macbook pro And my mail has stopped working now. It worked fine a week ago . It doesn't check for new mails , even when I click on get new mail , there is no new mail. I tried to sign out and sign in again but that didn't work . I read few articles on the internet but they all said use the Mac OS X DVD and reinstall but I didn't get any DVD , all I got with my computer was a Manual.
Info:
MacBook Pro
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.
I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.
