I lecture for a living. My old G4 connected to LCD projector worked great; image displayed on computer monitor is same as that projected by LCD. However my new MacBookPro connected to the LCD projector displays washed out images, as if I designed my Keynote lecture using pastel colors. Also my black & white x-ray images are blue & white.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.2)
I have a Macbook Pro that I have tried hooking up to our projector in our church using the Mini Display Port to HDMI adaptor but it is completely washed out to the point that it can't be used. It is only to this projector that I notice it. Using the exact same hook up to other projectors and TVs the picture is perfect. Also it is not the projector because a friend of mine hooked up their macbook pro the same way and the picture was fine. I've tried adjusting the colour and display profile settings and nothing seems to work.
View 2 Replies View RelatedI was doing a presentation the other day and had some issues. I was connected to a projector and until I rebooted, I was unable to get the projector to project the image on my computer. instead, it was projecting the "milky way" image from somewhere on my computer.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
I had my new mbp connected to an LCD projector for class the other day. At the end of class I disconnected it and put it in my bag. When I got back to the my office I took it out and it was burning hot everywhere. I opened it up, there wasn't a response, but it eventually restarted. Everything seemed fine. Since then, I have connected it to the tv at home a few times to watch some shows, and the exhaust gets going at a fairly high rate. I never noticed the sound of the fan before, but iStat says its going at 6200+ rpm and its quite loud. It doesn't really feel hot. Anything to worry about or am I just being paranoid about my new baby?
View 2 Replies View Relatedit's running 10.9.4. every time I hook it up to the projector where I teach, it hangs and then eventually freezes entirely, prompting a hard reboot. I don't understand why it is doing this to me. I just used it at a conference in March and it didn't do this. But suddenly at this new school, it cannot deal with the projector.
Info:
MacBook Pro, OS X Mavericks (10.9.2)
how can you cross fade between 2 monitor displays when projecting on a big projector.
kinda like how a dj crossfades music seemlessly with a toggle?
i'm not sure if that makes sense...
My macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
So here's the question. Running Lion on MacBookPro (17" with thunderbolt port) and need to connect BOTH a Mac 27" miniport display and a Mac 27" thunderbolt display. The miniport display needs to be last in the daisy chain, but not be connected to the thunderbolt display according to Apple (and they're correct - it goes black). Two possible solutions - (1) thunderbolt hub and connect both displays to that or (2) put another thunderbolt accessory in between the two displays.Â
Info:
LED Cinema Display (27-inch), Mac OS X (10.7.3), THUNDERBOLT
I just got my 11.6 mba yesterday. I absolutely loved it but after one day use and compared to my 13.3 mbp and my 21 imac , I found that the screen is very washed out, especially the red color. Does anyone else have this problem with their screen.
some information about the lcd
Manufacturer 00000610
Model 00009CF3
Date: C89CB080
I've had my MacBook for around two months now, and I've noticed this problem ever since I got it. The screen looks sort of washed out, similar to issue the iPod touch had when it first came out. Blacks don't appear black enough. It looks fine if you're looking up at the screen, but if you look down to it, dark colors are too light. I've tried the color calibration, and it has helped a little, but the problem still exists. Is there a way I can get rid of this? I've posted some pics below. They were taken with my iMac's camera, so they aren't that good.
View 8 Replies View RelatedI just purchased a macbook pro 2.53 Ghz 13.3 inch laptop. I got it today and so far I'm loving it except for the fact that compared to my rev A macbook air, the screen looks a bit washed out? Like the screen and brightness on my MBA is still better?
View 5 Replies View RelatedBought a Whitebook in August '08 and have noticed lately that the bottom of the screen (around the dock) is brighter than the rest. This extends to the top of the dock (which I have set at pretty small) but can be quite noticeable.
Has anyone heard of this or know any fixes? The screen has been calibrated but this isn't something that I could fix by re-calibrating.
Trying to use a template in my Pages program - yet it shows a "washed out" page.... Yet when I print and preview it shows all items.Â
Info:
Pages
if anyone else is having problems with their unibody Macbook pro screen getting washed out after a while - especially if the computer has been put into and woken from sleep. I run a 24 inch dell monitor along side my MBP in dual monitor mode, the MBP the slave monitor, with the Dell the main monitor. After a while of use, approx 2 hours, the macbook pro screen fades out/appears washed out. It seems to settle after either a restart or dimming the MBP screen to black for a few minutes. My MBP is not on a cooling stand but I'm going to get one Is this a heat thing, a firmware thing or a defective hardware? I'm running 10.5.6 and have updated the firmware/efi as per apple updates.
View 4 Replies View RelatedAfter upgrading to snow leopard I noticed a lot of my videos, downloaded from the Internet, bought of itunes, and burnt to a disk, now look very washed out, kind of fuzzy. I don't think it's my imagination.
View 1 Replies View RelatedI usually use my 2209WA connected to my Desktop running Windows 7, but sometimes I'll connect it to my MBP. Windows seems to have found a color profile that works very well, which it got from Windows Update, created by Dell, presumably.It might not be good enough for someone who needs 100% accurate color, but it's good enough for me.
I tried two different profiles for this monitor connected to my MBP. The first was one I downloaded from a forum somewhere, and the second was the one Windows is using, copied over. The display looks OK with both, but the color depth isn't nearly as good as it is on Windows. Connected to my MBP, the colors look washed out and flat, while the same colors are much richer when the monitor is connected to my PC. For example, pure blue (#0000FF) looks faded when the monitor is on my MBP, and much deeper when it is on my PC. I tried changing the gamma setting under OS X (manual calibration), but it didn't have much effect. It is set at 2.2 for both 2209 profiles and for my MBP LCD's profile.
How can I make my monitor properly calibrated when it is hooked up to my Mac?
In both cases I am connecting the monitor with DVI (just moving the cable since I'm too cheap to buy a switch), and both OSes have it set at native resolution. The settings on the monitor (color, brightness, contrast, etc) do not change when I switch computers.
I bought a new unibody Macbook pro in December and have had it linked to a Dell 2408WFP for 4 months now (dell monitor as primary monitor, macbook as slave via apple mini displayport to DVI adapter) and I am also using the dell USB ports to hook up my apple wired keyboard and logitech revolution MX mouse. Problems occurring ever since the beginning include: Occasionally the computer refuses to wake up either screen. It may flash blue and look like its going to come out of sleep (or monitor shut off) with no problems but then hangs. This is intermittent and I cant seem to trouble shoot what causes it. On top of that, more frequently, the Macbook screen looks washed out (loss of colour depth). It doesnt flash and there are no blank/white areas of screen, just very poor colour depth. This can occur even coming out of screen saver mode. It seems to correct itself with time or disconnecting the dell monitor. Main programs I always leave open are Firefox +/- Transmission. Seems to happen regardless of programs being open or not. Have updated everything that Software Update can find to update. Anyone else having these problems or have any ideas how to fix?
View 2 Replies View RelatedOn Leopard I used a color profile that was posted on here for the 9CA3 screens - it looked great. After installing Snow Leopard and using this profile again my screen seems a lot more washed out. Is this due to the gamma increase to 2.2? If so where can I change this in the color profile to match the original.
View 18 Replies View RelatedThis is question is being posted in the Mac OS & System Software because I couldn't find Quicktime under Windows software. Quicktime Player works fine under XP Pro on one PC and my other XP Pro computer has Quicktime Pro. MOV video is washed out running with Quicktime Pro but also Realplayer's playback is washed out. All other image files display fine.
Info:
Quicktime Pro 7.7.1 1680.42, Windows XP Pro
I have had this problem since the time I got my iMac.
As for background, I am using a 24" Intel iMac.
I have the Realtek audio drivers updated, am using boot camp 3.1, and am using Windows XP SP 3.
I havent used my windows side in a while, but it is frustrating to not find a fix and see pretty much no response from Apple.
Have I missed a fix to this problem? Because it has been happening for years now.
I've noticed that finder, automatically saves unnecessary spam images and mixes them in with my important images, is there someway of either adding a spam label, to them, so they end up in another folder, or completely stopping the saving process entirely?
View 7 Replies View RelatedIm using a MBP 13'' 09 I believe (9400M). Every time I boot into OS X 10.6.5 and now 10.6.6 my screen is all washed out. I can see stuff but there are just way too much "whites. "(With an external and also with the internal).
An easy remedy for the external just requires me to unplug and replug the monitor back in and the calibration automatically fixes it's self on how it used to be.
When I receive a jpg (not a jpeg) from a mac via email it wont open in either outlook or picture viewer etc (win xp). But if the same image is sent to any other PC (from the ma user) it opens OK.The added twist. If another pc user opens (which it does with no issues) then closes and sends back to the failing pc it opens with no issues!
can anyone recommend a good projector for my MBP?
View 2 Replies View RelatedI'm just wondering what cables I need to connect my Alu Macbook to my projector.
Here is a picture of my Projector's ports:
purchase mini-dvi to video adaper, tried both ports, tried control-f2, still can't work.
macbook is early 09 white edition, projector is infocus 74
btw,also tried on lcd tv.same result.
should i try a hdmi connector? worry abt wasting money.
I am having the following problem when connecting my macbook to my new Sony projector.
The projector is only showing a portion of the computer screen. It seems as if the computer is dividing the notebook screen and the proyector and I can move objects between the two screens. Its like having two displays.
But i dont want this. I just want to have the projector show exactly what the macbook is showing on its screen so that I can watch movies.
How do you connect the air to a projector, what cable do you need.
View 4 Replies View RelatedWhen i connect my macbook with an vga adapter to my projector it does not work. The projector is saying: no signal. How can i do to get the picture on the projector?
Info:
MacBookPro, Mac OS X (10.7.3), optoma projector
Can a MacBook Air be connected to an LCD projector?
Info:
MacBook Air, iOS 8.1.1
