I was doing a presentation the other day and had some issues. I was connected to a projector and until I rebooted, I was unable to get the projector to project the image on my computer. instead, it was projecting the "milky way" image from somewhere on my computer.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
I had my new mbp connected to an LCD projector for class the other day. At the end of class I disconnected it and put it in my bag. When I got back to the my office I took it out and it was burning hot everywhere. I opened it up, there wasn't a response, but it eventually restarted. Everything seemed fine. Since then, I have connected it to the tv at home a few times to watch some shows, and the exhaust gets going at a fairly high rate. I never noticed the sound of the fan before, but iStat says its going at 6200+ rpm and its quite loud. It doesn't really feel hot. Anything to worry about or am I just being paranoid about my new baby?
View 2 Replies View Relatedit's running 10.9.4. every time I hook it up to the projector where I teach, it hangs and then eventually freezes entirely, prompting a hard reboot. I don't understand why it is doing this to me. I just used it at a conference in March and it didn't do this. But suddenly at this new school, it cannot deal with the projector.
Info:
MacBook Pro, OS X Mavericks (10.9.2)
I lecture for a living. My old G4 connected to LCD projector worked great; image displayed on computer monitor is same as that projected by LCD. However my new MacBookPro connected to the LCD projector displays washed out images, as if I designed my Keynote lecture using pastel colors. Also my black & white x-ray images are blue & white.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.2)
My macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
can anyone recommend a good projector for my MBP?
View 2 Replies View RelatedI'm just wondering what cables I need to connect my Alu Macbook to my projector.
Here is a picture of my Projector's ports:
purchase mini-dvi to video adaper, tried both ports, tried control-f2, still can't work.
macbook is early 09 white edition, projector is infocus 74
btw,also tried on lcd tv.same result.
should i try a hdmi connector? worry abt wasting money.
I am having the following problem when connecting my macbook to my new Sony projector.
The projector is only showing a portion of the computer screen. It seems as if the computer is dividing the notebook screen and the proyector and I can move objects between the two screens. Its like having two displays.
But i dont want this. I just want to have the projector show exactly what the macbook is showing on its screen so that I can watch movies.
How do you connect the air to a projector, what cable do you need.
View 4 Replies View RelatedWhen i connect my macbook with an vga adapter to my projector it does not work. The projector is saying: no signal. How can i do to get the picture on the projector?
Info:
MacBookPro, Mac OS X (10.7.3), optoma projector
Can a MacBook Air be connected to an LCD projector?
Info:
MacBook Air, iOS 8.1.1
has anyone attempted to hook the brand new MBP Unibody to a projector?
I saw many problems to hook it to an external monitor via VGA or DVI adapter... has anyone attempted it? Is it possible?
I have a presentation by the end of the month and I need to know if I can do it on my Mac with Keynote or have to go with the craptastic Power Point.
What type of adaptors do you need for the new Air to be sure you can use it on all types of projectors?
View 6 Replies View RelatedI am looking for some suggestions for a projector that will run, and hook up smoothly on the Air. I don't need top of the line, but maybe around $700.00 is in the budget so far. I want to be able to show keynote presentations, website demos, and maybe some shorter video clips as well.
PS: I did some digging and wondered if the Optoma EP7150 was a good bet. The street price is around 800.00 (but I found a few that were around 500), and there is a newer model out now so the price should be dipping). 2.8 lbs, 2500:1 contrast ratio, 2,000 lumens... and XGA output. Anyone have any experience with this one?
I have a MBA (my first apple since the Mac SE 20... ha!) and I have a Dell 2300 multimedia projector. I have the DVI-VGA adaptor, but I can't get a good picture to project. I've toyed with the display settings to see if I can get it to improve. The picture stays dark, or blurry, etc etc.
Is there a setting I'm missing, or could I maybe have a bad adaptor?
I am getting a Pico Pocket Projector. Unfortunately, it doesn't offer a vga port and the only way to connect anything is through composite. I was thinking of using VGA to Composite and purchased the following:
[URL]
However, when I hook it up to my TV (projector is wrapped away some where) it does not respond and the macbook doesn't pick up on it. Do I need the official apple one? I want to browse the web as well as watching movies.
I am operating tiger 10.4.11 and my graphics thingy is Intel GMA 950.
Looking to connect your Mac notebook to a TV, projector, or sound system? Here's a quick guide that outlines all the things you need to make it happen - from adapters to cables to ports. Just follow the simple instructions to verify that you're getting exactly what you need. And remember, just because you setup the video side of things correctly doesn't mean you're going to get audio. If you want both video AND audio, make sure to also follow the directions indicated in the "Audio" portion of this post. VIDEO Check the ports on the back of your TV or sound system to see which of the following options are available to you. Find the port that matches below, and you're set! Remember, if you also want audio, check the "Audio" section at the bottom of the post. If you want to use composite video and you're using a MacBook (white, purchased after fall 2009), you need this adapter + a third party converter + a VGA cable + a composite (aka "RCA") cable. Aluminum unibody (black keys, purchased after summer 2009) MacBook, MacBook Air, or MacBook Pro, you need this adapter + a third party converter + a VGA cable + a composite (aka "RCA") cable.
View 24 Replies View RelatedI'm working with my church to set up a audio/visual presentation system and need some help. Here's what we hope to be able to do: Hook up 1 to 2 monitors to a Macbook or Mac Mini (definitely 2 if it is a Mac Mini) and 1 to 2 projectors. What will we need to make this possible?
View 2 Replies View RelatedI have a Casio (XJ-A240V/XJ-A245V) data projector, and I'm trying to connect wirelessly with a MacBook Pro (10.6.8). I see the projector in my Network wireless connection menu as "casiolpj_default1." The projector's LOGIN CODE is four digits, but the Network settings on my laptop must contain a minimum of eight characters. I've also tried connecting to the projector's Server IP address via computer to computer. I can join, but no projection. The projector is set to Wireless Input. I have clicked "detect monitors" on the MacBook. No further info is available in the projector manual.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a MacBook Air 13 , mid 2009 & am trying to get it to show power point on a projector, I have the correct plug. Do I have to push some keys to fire up the projector ?
Info:
MacBook Air, Mac OS X (10.7.3)
could thunderbolt connect to a projector
Info:
MacBook Air, Mac OS X (10.7.3)
I am seriously considering purchasing the new Retina Display MBP.My confusion lies with some of the adapters What adapter will I need to:
a) hook a new Retina MacBook Pro to a VGA projector?
b) hook a new Retina MacBookPro to a HDMI TV so that I can move video and sound to the TV directly?
I need to do both for teaching purposes when away from home.I understand I will need a new Ethernet Adapter and a new FireWire Adapter to work with the Thunderbolt connectors.
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7)
I have been using the same exact setup with the 2011 MBA but the new one won't work with my projector. I have a Acer X1161P 3D-DLP Projector and the proper cables since this has previously been working. I saw that in the first update there was something about external monitors.
Info:
MacBook Air (13-inch, Mid 2012), Mac OS X (10.7.4)
Attempted to connect my mac to my data projector and it wont work?
View 1 Replies View RelatedI taught two terms at the university using my MB Air 2012 with a VGA projector. Each time I connected the Mac to the projector and took it off, there was random noise on the display. I considered it as normal. Now the lessons are over and I don't use the projector any more. However, every time I turn on the Mac and when I shut it down, I see the same noise on the display.
View 1 Replies View RelatedI am having problems displaying my presentation through the projector system.
I have the DVI connector for the macbook 08, connected to "InFocus" projector, I setup the display monitor, turned on the mirroring and I just get my laptop screen to display.
I want to be able to change my projectors default background while using my mac book pro. Currently it is showing Apple's signature background. I would like to change it to a plain black background so that when I disengage mirroring the screen the audience sees will go black; thus allowing me to make any necessary changes/switch programs and then engage mirroring.
Info:
MacBook Pro
I have the most recent Macbook Pro, and I want to connect it to my projector. The projector has an S-Video port. The new Macbook Pros don't have a mini-DVI port, so I can't use a Micro-DVI to S-Video adapter.
View 1 Replies View RelatedWhen running through a projector to give a presentation the color red has disappeared. The first time it happened I calibrated with the Color Munki and all was well, for a while. Now the Color Munki can't calibrate it anymore. I've tried two different projectors (both work with another laptop)tried two different cables and two different connectors.Also tried different calibrations.Today we ran disk utilities and that worked great, for an hour or two.
Info:
MacBook Pro, Mac OS X (10.5.8)
