it's running 10.9.4. every time I hook it up to the projector where I teach, it hangs and then eventually freezes entirely, prompting a hard reboot. I don't understand why it is doing this to me. I just used it at a conference in March and it didn't do this. But suddenly at this new school, it cannot deal with the projector.
Info:
MacBook Pro, OS X Mavericks (10.9.2)
I was doing a presentation the other day and had some issues. I was connected to a projector and until I rebooted, I was unable to get the projector to project the image on my computer. instead, it was projecting the "milky way" image from somewhere on my computer.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
I had my new mbp connected to an LCD projector for class the other day. At the end of class I disconnected it and put it in my bag. When I got back to the my office I took it out and it was burning hot everywhere. I opened it up, there wasn't a response, but it eventually restarted. Everything seemed fine. Since then, I have connected it to the tv at home a few times to watch some shows, and the exhaust gets going at a fairly high rate. I never noticed the sound of the fan before, but iStat says its going at 6200+ rpm and its quite loud. It doesn't really feel hot. Anything to worry about or am I just being paranoid about my new baby?
View 2 Replies View RelatedI lecture for a living. My old G4 connected to LCD projector worked great; image displayed on computer monitor is same as that projected by LCD. However my new MacBookPro connected to the LCD projector displays washed out images, as if I designed my Keynote lecture using pastel colors. Also my black & white x-ray images are blue & white.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.2)
My macbook is running Mavericks OS X 10.9.4, and I'm having difficulty getting rid of the vertical black columns on my computer screen when it is connected to my classroom projector. I've played with the resolutions, and the best resolution for the VGA display is 1024x768...Unfortunately this creates less than desirable black columns on my computer screen. Another teacher in my school has display settings of "1024x768 stretched," and her macbook does not have the issue mine does. However, I don't think she is running Mavericks 10.9.4. I cannot find this display option on my computer.
Info:
MacBook, OS X Mavericks (10.9.4)
Whenever I connect my iPhone 4S (iOS 5.1.1) to iTunes (10.6.3) on my Mac (OS 10.7.3) it always freezes, always for about 30 seconds and then it will work again. But let me note, this only happens on the first time I connect my iPhone for the first time I turn on my Mac. I'm not sure if that makes sense. So, when I turn on my Mac and I open iTunes and connect my iPhone, it will freezes but after 30 seconds it will work. But let's say I am done syncing my iPhone and I unplug it but a few minutes later I want to sync it again, if I connect it, it won't freeze. But let's say I restart or turn off my Mac, but after I open iTunes for the first time after I've booted and I connect my iPhone, it will freeze.I've had the same issue with my last iPhone so I know it's not isolated to my iPhone. I have deleted iTunes from the Terminal app and downloaded iTunes from the Apple website, but the issue will persist.Also, I don't have any podcasts synced on my iPhone. I've read that sometimes causes it. I ONLY have music and apps synced.
Info:
iPhone 4S, iOS 5.1.1
Since last week my iTunes freezes anytime an iphone, ipod or ipad connects to it either wired or wi-fi
Info:
iMac, OS X Mavericks (10.9.3)
I have endless trouble with blue connectivity. I have tried all the obvious things. Like check the batteries, sync, pairing etc. The mouse is showing connected and strangely even wake the computer. Problem is then it freezes given no other option but to Hard start my mac. What a bummer. I am now using usb mouse no problem.
View 1 Replies View RelatedMacbook air 2013 cannot stay connected to internet. The first fixed this problem with osx 10.9.2 only to have it re-emerge with 10.9.3 What to do?
Info:
MacBook (13-inch Mid 2010)
I just got a MacBook last week, and am running 10.9.3. Twice so far, I've been using the computer and the UI ceases to respond: no response to keypresses, no response to the trackpad. The only way out seems to be a hard reset of the computer. This is a brand-spanking new Mac, although I have installed QuickSilver and Firefox. Have there been any issues with freezing on 10.9?
View 2 Replies View RelatedI have 2011 Macbook Pro (one of those that usually freezes during booting due to GPU failure). My Macbook will only boot if the GPU doesn't kick in during the start up. (When I'm very lucky the computer will get to the desktop and I can disable the GPU with gfxCardStatus). Sometimes I can boot the machine if I wrap it in a blanket to overheat it. Then it won't activate the GPU during booting if I'm lucky.
This is my question: Can I update my OS X if I maybe have to reboot a frozen machine 50 times before I reach the desktop? This would very probably mean that the OS would install and then ask for a reboot. And then I would maybe have to power off and retry to reboot many many times. Would this FUBAR the system. or would it work when I finally got it up and running?
Is the update installed 100% BEFORE the reboot, or are some of the updates installed AFTER the reboot? If that is the case, I would think it would have an effect if I had to power down the machine 50 times to get that one "lucky" reboot?
Info:
MacBook Pro (17-inch Late 2011)
I got a brand new Macbook Air yesterday, and everything was working wonderfully. Now, I noticed when I go onto Youtube the computer freezes for about 5-10 seconds as soon as the page loads. This just started happening about an hour or 2 ago. This is also happening when I'm listening to iTunes radio, and an advertisement commercial comes on. If the advertisement plays a video, and iTunes is maximized on my screen my screen will freeze for about 5-10 seconds.
I am brand new to using a Mac so I don't know where anything is or how to use it 100% yet.
Info:
MacBook Air, OS X Mavericks (10.9.4)
My MacBook Pro OS 10.9.4 regularly "loses" my home printer, set up through my WIFI. Even though I can see it in the Printer Menu, it claims I am not connected. So, I delete said printer. When I go to add a new printer, it cannot find said printer and I cannot figure out how to manually tell it that it is sitting right here on my desk.
Info:
MacBook Pro (15-inch Early 2011), OS X Mountain Lion (10.8.3)
I got a new Macbook Pro Retina (mid-2014) a few weeks ago and the trackpad and screen randomly freeze even when the only thing I have open is Safari. In other words, it doesn't feel like my computer has a 2.6 GHz Processor and 8 GB 1600 Mhz Memory. My downloads folder also constantly has the loading bar under it; it goes away when I remove it from the dock and replace it, but appears again after downloading one thing.
This is really frustrating when I got a new Macbook so that I wouldn't have to deal with these types of problems. They're all issues that I never encountered with my Macbook Air (mid-2011).
Info:
OS X Mavericks (10.9.4)
I just got a referbrished macbook pro retina and I'm having issues connecting to the internet. My old macbook pro, as well as every single other device, is able to connect to the internet without issue. My new macbook, however, isn't able to. Everything is typed in correctly as it is connecting to the router. Just no internet. However, there is one strange difference between my old macbook and my new macbook. The old one has a subnet mask of 255.255.255.0 while the new one has 255.255.0.0. The old one also has router information under the subnet mask, while the new one is blank.
Info:
MacBook Pro (Retina, 13-inch, Early 2013), OS X Mavericks (10.9.3)
When I first got my mac I had and iPhone 4s and iMessage was connected from my mac to my phone no problem. I recently got an iPhone 5s and now my iMessage on my mac doesn't show my messages sent from my phone nor does my phone show messages sent from my mac. How can I reconnect them so my messages will show up again?
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.3)
My Dell printer will not print documents. It says it is not connected and I have sure west .net as my internet.
View 5 Replies View RelatedMy iMac has recently begun freezing momentarily. First it will freeze for a few seconds (while still allowing the mouse to move). It will resume, and then a minute or so later it will freeze again for a slightly longer duration. During this time, I can move the mouse, click on things, but nothing responds. Music and videos pause and then resume, websites stop loading, not able to type, etc. In fact, it just happened while typing that last sentence.
Here is my Etre: EtreCheck version: 1.9.15 (52)Report generated September 7, 2014 at 10:17:19 AM CDT Hardware Information: ? iMac (27-inch, Mid 2011) (Verified) iMac - model: iMac12,2 1 2.7 GHz Intel Core i5 CPU: 4 cores 12 GB RAM Video Information: ? AMD Radeon HD 6770M - VRAM: 512 MB iMac 2560 x 1440 System Software: ? OS X 10.9.4 (13E28) - Uptime: 5 days 18:36:51 Disk Information: ? ST31000528AS disk0 : (1 TB) S.M.A.R.T. Status:
[code]...
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
Instantly says not responding the second I try to run it. I deleted the install file and tried to re-download, but I get the same problem. This is the error it was giving me in console when I would try to run it and it would stop responding.
"8/28/14 11:36:08 AM Install OS X Mavericks[1902] Error loading /Applications/Install OS X Mavericks.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStor age: dlopen(/Applications/Install OS X Mavericks.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStor age, 265): Library not loaded: /usr/lib/libcsfde.dylib
Referenced from: /Applications/Install OS X Mavericks.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStor age
Reason: image not found"
Info:
MacBook Pro (15-inch Mid 2010)
I have a iMac in my office connected to ethernet and wifi. Can I network/share files with the Macbook Pro at home I use for travel? Both have Mavericks OSX.
Info:
MacBook Pro, Mac OS X (10.6.8)
This error message keeps popping up on my screen. How can I make it stop? I tried restarting and it still does it.
Info:
iMac core duo, Mac OS X (10.5.2)
Today I configured "Back to my Mac" and I'm having a little issue with the external HDD that is connected to the Airport.
Let me explain the configuration: Airport Extreme (latest version) configured with Back to My Mac option, with an external HDD connected using USB port (The HDD is externanly powered). iMac computer with OSX Mavericks wireless connected, configured with iCloud Account and Back to My Mac with screen sharing).
I can access the shared screen and control the iMac from my Macbook Air outside my home network.
The issue is when I try to access the "network HDD" because I can connect using the right user but Finder windows never shows the HDD content. I have to disconect and reconnect to the external HDD to be able to see the files (If I have 3 windows and want to access the HDD on each of the 3 windows, I have to disconnect and reconnect 3 times).
Question: There is any way to access the external HDD and be able to see its content using the configuration mentioned? The disconnect and reconnect procedure for each window is normal? There is a better configuration I can apply?. Just as information, from my MacBook Im able to see perfect the HDD content from outside my home network.
Info:
Airport Express, OS X Mavericks (10.9.4), New Airport Express
I have just upgraded my MacBook Air to OS X Mavericks. When I try and import messages into the new version of Mail for the first time the importation freezes at 349 messages (out of 10,000). The point where it freezes is always the same being "recovered messages" in one of my email accounts.
View 1 Replies View RelatedLast night I updated my iMac to Mac OS X 10.9.4. Whenever I'm using my computer, it freezes up. How can I make it fast and smooth again? I have a most recent Time Machine backup before I updated. If there is a way to gain my computer's speed again? If not, can I possibly go back to 10.9.3?
View 5 Replies View RelatedI am trying to back my imac up for the first time using Time Machine (10.9 Mavericks) however it keeps freezing at 15.17gb and won't move on from there.
I am backing up to a Western Digital My Passport Ultra drive formatted to Mac OS Extended (Journaled) and it's Partition Map Scheme is GUID Partition Table.
Info:
iMac, OS X Mavericks (10.9.4), 21.5 inch, 2.7GHz mid 2011 version
and needs to be force quit. Running Mavericks on my MacBook Air.
View 3 Replies View RelatedFinder freezes every time when switching to another tab or folder, or renaming a folder. I really don't know why Here two logs from the console.
1. Log
Jun 1 16:26:21 B***s-MacBook-Pro com.apple.launchd[1] (com.apple.dynamic_pager[1607]): Exited with code: 1
Jun 1 16:26:21 B***s-MacBook-Pro com.apple.launchd[1] (com.apple.dynamic_pager): Throttling respawn: Will start in 10 seconds
Jun 1 16:26:26 B***s-MacBook-Pro kernel[0]: revoking trust for process 1594
[Code]....
2. Log
Jun 1 16:30:45 B***s-MacBook-Pro.local WindowServer[105]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Jun 1 16:30:51 B***s-MacBook-Pro com.apple.launchd[1] (com.apple.dynamic_pager[1660]): Exited with code: 1
Jun 1 16:30:51 B***s-MacBook-Pro com.apple.launchd[1] (com.apple.dynamic_pager): Throttling respawn: Will start in 10 seconds
[Code]...
I also have another Problem: Every time, I restart my mac, the process "installed" goes wild and uses over 100% of the CPU. After a few minutes also my disk is full. It seems to write Gigs of data in private/var/vm.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
After successfully upgrading to OS X Maverick, iTunes freezes everytime i plug my iPhone 5s or iPad mini. I
Computer specs:
-27-inch, Mid 2011
-2.7 GHz Intel i5
-8 GB ram
-1 TB Hd
Info:
iMac, OS X Mavericks (10.9.4), imac was purchased Nov 2011
My iMac started freezing at the login screen. I power up, the apple logo comes up (sometimes the blinking globe comes up for some reason) and then the apple logo flashes as if it restarted or something, and the loading indicator shows up for a few seconds. Then at the login screen everything looks normal (my picture is there and correct name of account is shown) when I type the incorrect password, the text box shakes appropriately. When I type the correct password, the loading indicator appears, the mouse turns into a beach ball, and it hangs until I hard shutdown.
I know it's not a hardware issue because I just booted from the recovery partition and was able to view all my files in terminal. I would rather not reformat the hard drive. Is there a specific file that may be corrupted that I could delete and mavericks would automatically rebuild it?
Info:
iMac, Mac OS X (10.7.3)
I downloaded AdMedic yesterday and now my Safari won't load some websites or it just freezes.
Info:
iMac, OS X Mavericks (10.9.4)
