I just got my 11.6 mba yesterday. I absolutely loved it but after one day use and compared to my 13.3 mbp and my 21 imac , I found that the screen is very washed out, especially the red color. Does anyone else have this problem with their screen.
some information about the lcd
Manufacturer 00000610
Model 00009CF3
Date: C89CB080
Im using a MBP 13'' 09 I believe (9400M). Every time I boot into OS X 10.6.5 and now 10.6.6 my screen is all washed out. I can see stuff but there are just way too much "whites. "(With an external and also with the internal).
An easy remedy for the external just requires me to unplug and replug the monitor back in and the calibration automatically fixes it's self on how it used to be.
I've had my MacBook for around two months now, and I've noticed this problem ever since I got it. The screen looks sort of washed out, similar to issue the iPod touch had when it first came out. Blacks don't appear black enough. It looks fine if you're looking up at the screen, but if you look down to it, dark colors are too light. I've tried the color calibration, and it has helped a little, but the problem still exists. Is there a way I can get rid of this? I've posted some pics below. They were taken with my iMac's camera, so they aren't that good.
View 8 Replies View RelatedI just purchased a macbook pro 2.53 Ghz 13.3 inch laptop. I got it today and so far I'm loving it except for the fact that compared to my rev A macbook air, the screen looks a bit washed out? Like the screen and brightness on my MBA is still better?
View 5 Replies View RelatedBought a Whitebook in August '08 and have noticed lately that the bottom of the screen (around the dock) is brighter than the rest. This extends to the top of the dock (which I have set at pretty small) but can be quite noticeable.
Has anyone heard of this or know any fixes? The screen has been calibrated but this isn't something that I could fix by re-calibrating.
if anyone else is having problems with their unibody Macbook pro screen getting washed out after a while - especially if the computer has been put into and woken from sleep. I run a 24 inch dell monitor along side my MBP in dual monitor mode, the MBP the slave monitor, with the Dell the main monitor. After a while of use, approx 2 hours, the macbook pro screen fades out/appears washed out. It seems to settle after either a restart or dimming the MBP screen to black for a few minutes. My MBP is not on a cooling stand but I'm going to get one Is this a heat thing, a firmware thing or a defective hardware? I'm running 10.5.6 and have updated the firmware/efi as per apple updates.
View 4 Replies View RelatedI bought a new unibody Macbook pro in December and have had it linked to a Dell 2408WFP for 4 months now (dell monitor as primary monitor, macbook as slave via apple mini displayport to DVI adapter) and I am also using the dell USB ports to hook up my apple wired keyboard and logitech revolution MX mouse. Problems occurring ever since the beginning include: Occasionally the computer refuses to wake up either screen. It may flash blue and look like its going to come out of sleep (or monitor shut off) with no problems but then hangs. This is intermittent and I cant seem to trouble shoot what causes it. On top of that, more frequently, the Macbook screen looks washed out (loss of colour depth). It doesnt flash and there are no blank/white areas of screen, just very poor colour depth. This can occur even coming out of screen saver mode. It seems to correct itself with time or disconnecting the dell monitor. Main programs I always leave open are Firefox +/- Transmission. Seems to happen regardless of programs being open or not. Have updated everything that Software Update can find to update. Anyone else having these problems or have any ideas how to fix?
View 2 Replies View RelatedOn Leopard I used a color profile that was posted on here for the 9CA3 screens - it looked great. After installing Snow Leopard and using this profile again my screen seems a lot more washed out. Is this due to the gamma increase to 2.2? If so where can I change this in the color profile to match the original.
View 18 Replies View RelatedI have a Macbook Pro that I have tried hooking up to our projector in our church using the Mini Display Port to HDMI adaptor but it is completely washed out to the point that it can't be used. It is only to this projector that I notice it. Using the exact same hook up to other projectors and TVs the picture is perfect. Also it is not the projector because a friend of mine hooked up their macbook pro the same way and the picture was fine. I've tried adjusting the colour and display profile settings and nothing seems to work.
View 2 Replies View RelatedI lecture for a living. My old G4 connected to LCD projector worked great; image displayed on computer monitor is same as that projected by LCD. However my new MacBookPro connected to the LCD projector displays washed out images, as if I designed my Keynote lecture using pastel colors. Also my black & white x-ray images are blue & white.
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.2)
Trying to use a template in my Pages program - yet it shows a "washed out" page.... Yet when I print and preview it shows all items.Â
Info:
Pages
After upgrading to snow leopard I noticed a lot of my videos, downloaded from the Internet, bought of itunes, and burnt to a disk, now look very washed out, kind of fuzzy. I don't think it's my imagination.
View 1 Replies View RelatedI usually use my 2209WA connected to my Desktop running Windows 7, but sometimes I'll connect it to my MBP. Windows seems to have found a color profile that works very well, which it got from Windows Update, created by Dell, presumably.It might not be good enough for someone who needs 100% accurate color, but it's good enough for me.
I tried two different profiles for this monitor connected to my MBP. The first was one I downloaded from a forum somewhere, and the second was the one Windows is using, copied over. The display looks OK with both, but the color depth isn't nearly as good as it is on Windows. Connected to my MBP, the colors look washed out and flat, while the same colors are much richer when the monitor is connected to my PC. For example, pure blue (#0000FF) looks faded when the monitor is on my MBP, and much deeper when it is on my PC. I tried changing the gamma setting under OS X (manual calibration), but it didn't have much effect. It is set at 2.2 for both 2209 profiles and for my MBP LCD's profile.
How can I make my monitor properly calibrated when it is hooked up to my Mac?
In both cases I am connecting the monitor with DVI (just moving the cable since I'm too cheap to buy a switch), and both OSes have it set at native resolution. The settings on the monitor (color, brightness, contrast, etc) do not change when I switch computers.
This is question is being posted in the Mac OS & System Software because I couldn't find Quicktime under Windows software. Quicktime Player works fine under XP Pro on one PC and my other XP Pro computer has Quicktime Pro. MOV video is washed out running with Quicktime Pro but also Realplayer's playback is washed out. All other image files display fine.
Info:
Quicktime Pro 7.7.1 1680.42, Windows XP Pro
I have had this problem since the time I got my iMac.
As for background, I am using a 24" Intel iMac.
I have the Realtek audio drivers updated, am using boot camp 3.1, and am using Windows XP SP 3.
I havent used my windows side in a while, but it is frustrating to not find a fix and see pretty much no response from Apple.
Have I missed a fix to this problem? Because it has been happening for years now.
My Macbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 3 Replies View RelatedI tried to use some software to test the display. I found when the screen goes to completely dark with the backlight on, the bottom side of my screen is brighter than other parts.... have u guys met any problem like that, or is this some problem with my MBA?
I have 3 problems with my aluminum macbook and I think that they are all related and are caused by each other.1) The hinge creeks sometimes when I slowly close the screen and I'm afraid it will only get worse as this just started happening.) When the macbook is closed, the screen is uneven. The right side does not completely close and there is a gap between the base of the computer and the screen. However, the left side is just fine unless I push down on the right side then the left side just goes up and becomes uneven.
View 2 Replies View RelatedSo I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies View RelatedI have a 15" MacBook Pro with a 20" ACD. Whenever I full screen view something, like say with VLC or even a web browser video, I lose functionality on the other screen. It never really bothered me until I realized I needed the multi-tasking. Is there anyway to keep functionality on either screen when the other is in fullscreen mode?
View 2 Replies View RelatedI have a problem with my screen - when there is something black on, I can see a faint mark of a lighter colour. I have tried to take a picture, please excuse the poor quality. There is nothing visible when the screen is off, even under close examination. Is it less visible when lighter things are on the screen, and invisible when the screen is white.
No drops or liquid spills. Will this go away on it's own? Any fixes?
I recently upgraded to a Macbook Pro 15" with a mini displayport, and I decided I would share my LCD monitor with my windows box. The desktop box is connected with DVI and I have connected my Macbook through an HDMI adaptor from Moshi. Everything works very well, and I'm pleased with the quality of the output, but I'm having trouble with a screen flicker in full screen games.
When I select full 1080p (1900x1080) in any full screen game, the screen "shudders." It does not occur on the OS X desktop, and I can only explain it as a shudder. Lines and text shift perceptively left and right, and the game is unplayable. I have experienced this problem in Starcraft 2, World of Warcraft, and Half Life: Episode 2 so far.
Could the problem be with my monitor and the way it handles an HDMI signal? The Macbook is flawless otherwise, with no other issues of any kind. The "shudder" only occurs during full screen games set to 1900x1080. Lower resolutions are not effected and work fine...
I'm stumped.
Edit: I should add that I have no other 1080p capable devices to test the output with.
I've got my MacBook attached to my 40" Sony Bravia HDTV (KDL40W4500), and when I mirror the display or use the HDTV as the primary screen it cuts off portions of the screen like the main toolbar on top, as well as some of the dock. I tried to change the Screen Format on my TV but that doesn't seem to work, does anyone know how to fix this?
View 9 Replies View RelatedHas anyone noticed a very slight flicker on their new MBPs? I have a new 13" and, every so often, the screen brightness dims and then brightens very quickly (happens in less than a second).The option for auto-adjusting the screen brightness is off so it's not that particular function.It's most noticeable on all-white backgrounds both on AC and battery power. Hard drive access doesn't seem to coincide with the dimming.
View 17 Replies View Relatedthere are two things that the macbook is doing to me. one is that sometimes when i move the screen up or down (the hinge is rather stiff) a white (thin) line flashes across the screen. but recently, while randomly browsing through the internet, the screen almost... i guess faded to a gray screen, but like gradually, and not like a kernel error, like the display just faded away. happened twice in a row, did a battery pull and now wont do it again.
View 6 Replies View RelatedI'm wondering how uniform the backlighting is on everyone's mid-2010 MBPs. The screen on mine is sort of a gradient, with the screen becoming progressively brighter towards the left side. There are also what appear to be columns where the screen is slightly darker than the surrounding area. This makes it annoying to read in low-light conditions because the left side of the screen will be at a comfortable level when the right side is slightly too dim, or the other extreme. I absolutely cannot stand dead/hot pixels though which makes me hesitant to have the screen replaced. I just bought the notebook a week ago but I don't want it replaced, as I installed a Moshi PalmGuard before I noticed the screen issues. I also installed an InvisibleShield but I can have that replaced at no cost.
View 16 Replies View RelatedI have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
View 2 Replies View RelatedWhen I maximize the screen on my Mac Book Pro it hides the menu bar and the typed tool bar at the top of the screen as well. How do I undo this?
Info:
MacBook Pro, Mac OS X (10.7.4)
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.Â
Info:
MacBook Pro, OS Lion
My daughter has dropped her ageing MBP, bent the screen lid and now the screen is no longer usable. We have other Macs available to access the data on the screen if we could turn on Screen Sharing on the damaged MBP running Snow Leopard.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
