My MacBook Pro started being weird yesterday. First of all the space bar stopped working - it wouldn't respond at all, or it would act like it was being held down, even though it wasn't.
Now it won't sleep - at all. If I close the lid, the light stays solid, dims once, then comes back solid, and the computer turns back on (the Apple logo lights back up etc). If I choose Sleep from the Apple menu with the screen open - the same thing happens, it sleeps for a second, then wakes back up.
I've reset the SMU and PRAM. I can't think of anything else to do.
This computer is currently on eBay and someone has bid �1,400 on it, I don't want to send it away knowing it has a problem.
Just FYI its a 2009 MacBook Pro 17" with built-in battery.
It has been happening a lot lately, i try to wake my unibody Macbook from sleep and it just won't wake up, when i close the lid, the light is on, when i open the lid, it goes off but nothing happens, just an off display.. I just turn it off from the button and start again, then i get a kernal panic.
I'm in a bit of a pickle.. I just tried to go and use my computer. I wake it and once my desktop pops up , I notice a strange black flash, now the screen is dark and the only sign of life is the sleep indicator light which is staying lit.
Nothing is responding
I tried holding down the power button, but for some reason I can't force it off, does anyone have any idea as to what else I could do to get it turned off?
I just replaced the bezel on my girl's MBP, pre-unibody, A1260 LED backlit display, and it no longer senses that the lid is closed and goes to sleep. Does anyone know where this sensor is?
if anyone else is having problems with their unibody Macbook pro screen getting washed out after a while - especially if the computer has been put into and woken from sleep. I run a 24 inch dell monitor along side my MBP in dual monitor mode, the MBP the slave monitor, with the Dell the main monitor. After a while of use, approx 2 hours, the macbook pro screen fades out/appears washed out. It seems to settle after either a restart or dimming the MBP screen to black for a few minutes. My MBP is not on a cooling stand but I'm going to get one Is this a heat thing, a firmware thing or a defective hardware? I'm running 10.5.6 and have updated the firmware/efi as per apple updates.
I bought a new unibody Macbook pro in December and have had it linked to a Dell 2408WFP for 4 months now (dell monitor as primary monitor, macbook as slave via apple mini displayport to DVI adapter) and I am also using the dell USB ports to hook up my apple wired keyboard and logitech revolution MX mouse. Problems occurring ever since the beginning include: Occasionally the computer refuses to wake up either screen. It may flash blue and look like its going to come out of sleep (or monitor shut off) with no problems but then hangs. This is intermittent and I cant seem to trouble shoot what causes it. On top of that, more frequently, the Macbook screen looks washed out (loss of colour depth). It doesnt flash and there are no blank/white areas of screen, just very poor colour depth. This can occur even coming out of screen saver mode. It seems to correct itself with time or disconnecting the dell monitor. Main programs I always leave open are Firefox +/- Transmission. Seems to happen regardless of programs being open or not. Have updated everything that Software Update can find to update. Anyone else having these problems or have any ideas how to fix?
I just got a Early 2011 Macbook Pro 15" i7 that has a broken scissor for the "x" key (I still have the black "x" key itself. Would the scissors from an late 2007 Macbook Pro 15" be compatible (I've got an old dead keyboard for it that had coffee spilled on it)?
I leave my Air on pretty much all the time, and put it to sleep while moving around etc. Sleeping it disconnect the Airport connection - which if very annoying. At a desk I've just been dimming the display all the way off in order to keep my connection.
However, I recently noticed that by setting a "sleep display" hot corner, my network connection is maintained.
I have 2 questions: 1) Is sleep display equivalent (functionally) to simply dimming the display all the way down? 2) Is there a way to either set up a shortcut to sleep the display (other than a hot corner) and/or set it so that only the DISPLAY sleeps after 'x' minutes?
I set the MBP to sleep in 10 min through the Energy Saver pref with the option to sleep the hdds. When it's about to sleep the screen dims, then turns black, then the sleep light comes on but does not blink no matter how long I leave it. The blinking only happens when I close the lid or when I select the Sleep option under the Apple logo. Is that normal behavior?
I have a macbook pro 13" early 2011 and I'm se as shown in the pictures (since i upgraded to os x yosemite) . It happens after display sleep or computer sleep on login not on boot up .I've noticed that i run out of ram when the problem appears (only 15MB RAM available out of 4GB), though i doesn't happen every time . I've talked to service and told me its either motherboard replacement or because the ram isn't enough (gpu shares with main ram) so maybe i should try upgrading ram. URL....
I have torrents going all the time. If the computer goes to sleep, the internet disconnects, so they stop. Display sleep wouldn't disconnect though. Is it OK to have computer sleep on "never" but keep display on "15 minutes"? I don't usually even leave the computer on overnight.
i tried mroogle and search but i couldn't find exactly what i was looking for and i know this community knows it all.
i am trying to prevent my new 2010 macbook pro from going to sleep when the lid in closed. i know there are programs that do this but they keep the display on as well. I wanted to know if there is a program that does it and has the option of turning off display. i am running snow leopard 10.6
Recently I've started connecting my 2.5GHz Intel Core 2 Duo (pre-unibody) Macbook Pro 17" to an external monitor (via DVI).
Since then my computer goes into Safe Sleep instead of Sleep (it's plugged into power).
This is an annoyance I'd rather avoid because even if all programs relaunch:I have to wait for them to launch (longer)Programs like Excel seem to have been quit in an unorthodox fashion: when it starts back up I get an error notice that it was shutdown inappropriately & the doc which reopens is a rescued version of the doc I had open before the safe sleep.
I have read in at least one place in the forum that "any unibody macbook pro can take up to 1TB hard drive". As someone who has upgraded Dells and Thinkpads in the past this would make sense, i.e. Any hdd with same dimensions, access method (SATA?) and same spin speed would be supported.
The reason I ask is that I called Apple UK to have a family member's late 2009 13" unibody upgraded at an Apple store. Apple UK do not undertake hardware work and they directed me to a central London office who do their official repairs, and they said if the max capacity of that model when originally produced was 500GB then anything bigger "might use too much electricity". Would not upgrade beyond 500. Offered me £300 for the old one in exchange for a new mbp. As far as I was aware the bulk of the power drawn was down to spin speed not platter density. Upgrading from 320 to 500 is hardly worth their fee so it looks like a home upgrade.
A replacement to my girlfriend's pre-unibody 2.5Ghz (4,1 with the 8600GT) macbook pro is soon to arrive (thanks Applecare) and I'm really hoping I can just "hot-swap" the old (but newish) 500GB 7200 rpm HDD (bootcamp partitioned ) into the new unibody replacement. Does anybody think this will work? Will there be EFI/hardware issues?
FYI (this is due to 4 ongoing graphics/screen issues)
My Macbook Air is doing something pretty strange..
This is as far as my brightness will go up. This is using the keyboard brightness thing on F1 and F2. When I go into the system preferences, I can drag the brightness to the top, but as soon as I release the mouse, it automatically flicks back to where it was before without getting any brighter.
Does anyone have any ideas as to the cause?
The model number of my macbook is A1342 if that helps.
I am thinking about buying a SSD to install in my late 2008 aluminum macbook. Specs are 6GB of ram, 2.4 GHZ processor, and the standard 250GB hard drive which I believe is 5400 RPMs. So my question is, is it worth it? Will I see that much of a performance improvement? I don't reboot that often. I currently am using 92GB of my 250GB hard drive. So I would probably only need like a 160GB or 200GB SSD. Also if I do get one which one would be a good one to get. What should I look for in features.
I rarely shut down my PCs, is it okay to leave the Macbook Pro on 24/7? It's a notebook and heat might be a concern especially the fact that notebooks were never meant to run 24/7. Then again, my MBP never gets very hot.
BTW, where is the intake/exhaust vents located on the MBP unibody?
Today I noticed a dead pixel on my MB in same bar where the Apple logo is. When Safari is open the dead pixel is a bit above the 'o' where it says 'History'. and I can't do anything to fix it. Im wondering if applecare will cover this though. My MB model is now discontinued (uni MacBook) so even if I can get an Apple store to take it in would they replace the screen or the machine?
Here is a picture that recreates the annoyance almost as perfectly as I see it.
I'm still waiting to get a MacBook because I don't think they should be breaking. I have other plastic laptops that lasted for years and never got a crack/chip once. Why does MacBook? Too much money to spend on something that you can't rely on in my opinion... I was thinking of getting a MacBook Pro but don't really wanna drop an extra 100-200 dollars to get a 500 GB harddrive like I would on the normal MacBook.
i have the 13 inch 2009 unibody macbook (see signature for specs) and am thinking of upgrading to the 13 inch macbook pro when it's refreshed in Q1. what do you guys think? and what's macmall all about? is it some place i can post my macbook?
Do the batteries on the unibody develop a memory like cell phones do if you keep charging them before the battery is drained completely or almost dead? I don't want to kill the battery life and was just curious if apple had maybe done something in the cpu to control that?
I wanted to use a MB in desktop mode, with a wireless mouse, keyboard, and external monitor. With the lid closed, and the external monitor as the only screen (main screen), will the MB heat up? I know it might have been an issue in early Leopard stages, but there were glitches where doing this desktop mode will cause the notebook screen to go dark and you have to reboot if you want to use the notebook's screen instead or with the desktop screen. Does this happen with the MBs now?
At full brightness the flickering is barely noticeable unless you really tried to look hard for it but you can also see it on website backgrounds with lots of lines, such as the left sidebar on [URL] Also, when the backlight dims after being left alone, the backlight flickers for a couple of minutes and then disappears. I have had this macbook for a bit more than 2 weeks. Should I send it in for a repair/replacement?
