MacBook Pro :: Stuck In Sleep Mode After Update Now Not Booting
Jun 21, 2010
I have an older but babied 2008ish Macbook Pro. Today upgraded my 3GS to os 4 with no problem. I downloaded a couple things but didn't go crazy today. I left work and shut lid. When I got home it was stuck on the screen saver password for a long time. I turned off the unit and now it just boots to a white screen. I can boot via OSX disc but it also doesn't see HD. This is a 500gb Seagate drive and I'm screwed if it's dead. Any suggestions to at least get to my bootcamp partition?
My MBP (about 2 years old, Santa Rosa) is having some major issues both starting up and going into sleep. First off, I'm using 10.5.8, everything's updated, I don't have a bunch of stuff on the startup processes (quicksilver and iTunes helper) and I'm plugged into a power source. When I start my computer (since yesterday) it has been taking an abnormally long time at the grey screen before the Apple, the grey screen with the apple and the rotating wheel, and then it goes to a light blue screen for 5 or so minutes (repeat: minutes) until flashing light and dark blue and finally taking me to the login. Not only that, but my computer will not go to sleep when I close the lid. Instead, the screen turns off and the hard drive and fans keep chugging. What's more annoying is when I then try to open the lid to manually turn it to sleep, the screen won't turn on. This usually requires a hard reset, which then takes 10 minutes to start up.
My 2.3 GHz i5 13" MacBook Pro Early 2011 goes to sleep whenever I boot it in clamshell mode with an external display, mouse and keyboard attached (it sleeps right after the boot sequence). Is there any way to prevent this, as it is very annoying when restarting.Â
Running OS X 10.9.3Â
When booting from an external firewire drive, on which I have OS X 10.9.3 installed, my Mac completes the boot sequence without going to sleep. I have run the OS X installer over my current installation, (without wiping), and the computer still goes to sleep once the boot sequence has completed.
A bit of a backstory: Recently my mid-2008 MacBook Pro stopped working. When I try to boot it up, the screen just stays black and the idle light flashes perpetually. I've reset the NVRAM and SMC, even attached it to an external monitor, but nothing works. After a lot of research, I'm pretty sure it's a problem with the hall effect switch. But I digress; I don't actually need this computer repaired, as I have a second (newer) MacBook Pro I can use. However, there are some files on the old one that I'd like to retrieve. And yes, I've tried booting into target disk mode, which unfortunately doesn't work for reasons listed above. Essentially what I'm asking is, is there a way I could transfer the files off the old computer to the new one? I know, I should take it to the Apple store, but that's not really an option right now due to personal reasons.
Second time since yesterday-My MacBook (White-2007) has been stuck in the sleep mode and the only way for me to get out of it was to force shutdown. (Pressed the power button for ~5 seconds.)
The white sleep light had stalled and was not blinking-Is this an indication of software problems, or that my harddrive is about to fail?
My Macbook is currently stuck booting up in windows 7. My shift key also appears to be stuck so holding the Option key when booting up to choose a start up disk isn't an option (it doesn't work). I do not currently have access to an external keyboard. I do have the startup disk. I'm wondering if I can use the startup disk to reset the systems startup disk? Are there other options?
I'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
As of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
When booting up on my Mac Book Pro side it gets stuck on a gray screen and wont boot even when in safe mode. I have cleared the P/Ram and still have acces to the partioned windows side on the same computer. How should I procede to get my Mac OS running again.
my computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
Major issues here please I can use all the help I can get. My MacBook Pro 13" Unibody Aluminum is booting in safe mode everytime. I restate. Someone has advised my shift key could be stuck? How the he'll could that have happened? It's only a few months old, I just upgraded hard drie. My trackpad was running funky before that. My keyboard was acting wired, only symbols showed up.
My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.Ive tried:fsckdisk utility repair/verifyreinstalling OS X LionÂ
When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.Â
Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago. Â
i have a macbook pro 15' late 2011 and it stopped booting. The apple disappear and the. It get stuck in a gray screen.I saw on the web that it would be possible to apply a software fix, disabling the video card. IN my country a new macbook is about 3.000 usd, so buying a new one is not an option for me.Â
Info: MacBook Pro, OS X Mavericks (10.9.4), Macbook pro late 2011 15'
Does OS X supports a feature (I think it's called S3) that allows the computer to write everything into the the HDD before sleeping and can wake up from a complete power down? I switch between Windows and Mac very often, for games mostly. But I don't want to shut down Mac every time I want to play a game. I don't want VM or any kind.
I had a problem with my laptop where the lcd on the monitor does not always work, presumed to be due to a loose inverter cable or something similar to this. As a temporary solution I have been using an external monitor for the past few days. Depending on whether the laptop lcd is working, I have had it on both mirrored and dual monitor settings. However, this evening when I have come to use it, the external monitor is now the only one that is working. Options to turn off mirror display have now gone. Also, the button on my mouse pad no longer works, yet the pad itself does.
I have come to the conclusion that my laptop is in 'clamshell' mode. It remains on, and does not sleep when I close the lid. I have put it to sleep form the apple menu, disconnected the external monitor, and the opened the lid again, and when it turns back on from sleep, the screen flashes on for a second, but then goes to sleep again. I have tried turning it off, restarting, taking the battery out, everything I can think of, but unless the external monitor is connected it almost immediately goes back to sleep.
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
This happens once or twice a day and is very annoying. I will be browsing on Firefox, for instance, and I will scroll down and for whatever reason, after that any click will be interpreted as a right click, bringing up the contextual menu. It does not happen when I'm using a wireless trackpad; only with the trackpad on the computer itself. It will fix itself after a few minutes, again with no reason.
I have an Intel MacBook and just did a software update, one of which was a 49MB download for Intel Macs. After installing, it asked for a reboot. Thereafter it booted as far as a blue screen and then stalled. I held down the off button until it went off, restarted and it got no further. I left it for over half an hour to see if it would get past the blue screen, but it didn't. After a few minutes of blue screen, the fans ramp up. I'm completely lost with Macs and don't even know where to begin.
Are there any known compatibiity issues with booting from an OS 10.6.x drive after installing EFI Firmware Update 2.5?I am running Lion (10.7.3) on my MacBook Pro (13-inch, Mid-2010) but have held off installing the firmware update because being able to boot from a 10.6.x backup drive is more important right now than internet-based Lion recovery. If there's no issue booting 10.6.x (and running apps), then I will go ahead and install the firmware update, otherwise I'll wait awhile longer.
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I got a Filemate ExpressCard SSD but since I started running OS X from it I encountered serious problems. I had to install OS X quite a few times already but then I was able to backup with Time Machine. So now I have a working backup but I restored about 203 times already but I still have the problem of my Mac not booting up. When it starts up it shows the grey Apple logo with a loading bar underneath it which just gets stuck. I left it like that for several hours so that I know for sure that it was stuck. Anyways, right now I am on a restored Time Machine backup but Time Machine won't backup. It gets stuck and so I thought I open Console.app. What I found is this which doesn't really have anything to do with Time Machine but probably with my booting problems
The last time I used my imac I had a picture disc in it and shut it down properly. Now it will not boot up. I get the screen with the apple and the turning wheel and nothing past that. A disc is stuck as well. Any ideas on either, to get me my computer back?
I was working on my computer last night and stepped away. The battery ended up draining all the way. I pluged it back in and couldnot get it to restart. So I left it plugged in all night to recharge the battery. Woke up this morning to a full battery tried to turn it on but nothing happens except the sleep mode light turns on. Black screen and no functions. Pulled the battery to reset it still nothing. Put in a cd to see if it would wake up still nothing.
Info: MacBookPro, iOS 5.1, Stuck in sleep even after reboot
I am on 10.6.4. I have learned that I can boot up in 32-bit mode by holding down the 3 and 2 keys while starting up. Is reverting back to 64-bit mode as easy as holding down the 6 and 4 key? If not, then what?
I was getting a error code 36 on my mac so I decided to try to boot up in safe mode now my macbook pro will not stop trying to boot to safe mode. I am on snow leopard.
