Second time since yesterday-My MacBook (White-2007) has been stuck in the sleep mode and the only way for me to get out of it was to force shutdown. (Pressed the power button for ~5 seconds.)
The white sleep light had stalled and was not blinking-Is this an indication of software problems, or that my harddrive is about to fail?
A bit of a backstory: Recently my mid-2008 MacBook Pro stopped working. When I try to boot it up, the screen just stays black and the idle light flashes perpetually. I've reset the NVRAM and SMC, even attached it to an external monitor, but nothing works. After a lot of research, I'm pretty sure it's a problem with the hall effect switch. But I digress; I don't actually need this computer repaired, as I have a second (newer) MacBook Pro I can use. However, there are some files on the old one that I'd like to retrieve. And yes, I've tried booting into target disk mode, which unfortunately doesn't work for reasons listed above. Essentially what I'm asking is, is there a way I could transfer the files off the old computer to the new one? I know, I should take it to the Apple store, but that's not really an option right now due to personal reasons.
Info:MacBookPro, Mac OS X (10.7.4)
I have an older but babied 2008ish Macbook Pro. Today upgraded my 3GS to os 4 with no problem. I downloaded a couple things but didn't go crazy today. I left work and shut lid. When I got home it was stuck on the screen saver password for a long time. I turned off the unit and now it just boots to a white screen. I can boot via OSX disc but it also doesn't see HD. This is a 500gb Seagate drive and I'm screwed if it's dead. Any suggestions to at least get to my bootcamp partition?
View 1 Replies View RelatedI'm having a problem with my PowerBook G4 where is goes into sleep mode at random times. Mostly when I am streaming video..or at times the fan comes on, it sounds super high then boom. sleep mode again. After hitting the space bar, it comes back on, but it'll happen again shortly after. I've played with the sleep settings
View 5 Replies View RelatedAs of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out.
The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks (a grinding sound), but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
How should I remedy this problem? Is this a hard drive issue? Hard drive failure? Has the grinding sound finally caught up with me? I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
my computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
View 1 Replies View RelatedMy iMac wake unexpectedly from sleep mode then goes back to sleep 00:10-00:15 later. Yosemite is current.
Info:
iMac, Mac OS X (10.6.8)
I am running Mac Mini as a home server (turns out to be not a great idea, btw), and even though I set the preference to never sleep or shut down, it does go to sleep when there is no activity for long time. Since I am using it as home server, it should stay awake all the time or at least wake up from sleep when there is incoming ping from other computer, but it just goes to sleep.
View 5 Replies View Relatedi have a little problem with the sleep light... i don't know when this started, but i notice today, that when i put my macbook pro to sleep, the light just stays on and not "pulsing" like it used to do... is that normal?
Info:
Macbook Pro 13, Mac OS X (10.5.8), 4 gb ram, 2.53 ghz intel core 2 duo
I had a problem with my laptop where the lcd on the monitor does not always work, presumed to be due to a loose inverter cable or something similar to this. As a temporary solution I have been using an external monitor for the past few days. Depending on whether the laptop lcd is working, I have had it on both mirrored and dual monitor settings. However, this evening when I have come to use it, the external monitor is now the only one that is working. Options to turn off mirror display have now gone. Also, the button on my mouse pad no longer works, yet the pad itself does.
I have come to the conclusion that my laptop is in 'clamshell' mode. It remains on, and does not sleep when I close the lid. I have put it to sleep form the apple menu, disconnected the external monitor, and the opened the lid again, and when it turns back on from sleep, the screen flashes on for a second, but then goes to sleep again. I have tried turning it off, restarting, taking the battery out, everything I can think of, but unless the external monitor is connected it almost immediately goes back to sleep.
Command, Option 8 does not change the zoomed effect of the screen.I also tried in System Preferences to change out of zoom but to no avail.
Info:MacBook
I switched my user to guest mode to check it out and I am now unable to log out and switch back to my main user. I click on the Apple button at the top left corner and it only says to restart or shut down and I have done both multiple times and continues to open back up into guest mode.
Info:
MacBook Air, iOS 8.1.1, Early 2014 Mac Book Air
Few months ago I modified some plist somewhere to force verbose mode booting. It was not the NVRAM command. I remember adding a <string>-v</string> somewhere. But now I have no clue where it was.
View 3 Replies View RelatedSo I recently erased my 2007 iMac through recovery mode. That process went fine. But when I went to go install the latest version of the mac OS (still through recovery mode) it comes back with a window reading basically that process I just did failed. I did this process many times, it doesn't work, and now at the moment I have iMac sitting in recovery mode and I can't do anything on it. Should I bring it into a store?
Info:
iMac, Stuck in recovery mode with no os
I have a password set for the only account on my mac pro. My keyboard's batteries died before I turned on the machine. I replaced the batteries and now its stuck in discovery mode and I cant type in my password in order to log in. And I don't have a usb keyboard. What can I do? Other than go out and buy a usb kb. Its the crappy apple wireless kb. Mouse is detected
View 2 Replies View RelatedWhen I boot up the computer,I get a grey screen and what looks like a yellow firewire logo slowly floating around.I don't know much about computers but I was told it had something to do withmy computer waiting to be controlled by another computer.
View 6 Replies View RelatedThis happens once or twice a day and is very annoying. I will be browsing on Firefox, for instance, and I will scroll down and for whatever reason, after that any click will be interpreted as a right click, bringing up the contextual menu. It does not happen when I'm using a wireless trackpad; only with the trackpad on the computer itself. It will fix itself after a few minutes, again with no reason.
Info:
MacBook Pro, Mac OS X (10.7.3)
But still cannot get past grey start up screen with spinning wheel after software update.
Info:
MacBook Pro, Mac OS X (10.7.4)
I was working on my computer last night and stepped away. The battery ended up draining all the way. I pluged it back in and couldnot get it to restart. So I left it plugged in all night to recharge the battery. Woke up this morning to a full battery tried to turn it on but nothing happens except the sleep mode light turns on. Black screen and no functions. Pulled the battery to reset it still nothing. Put in a cd to see if it would wake up still nothing.
Info:
MacBookPro, iOS 5.1, Stuck in sleep even after reboot
I am absolutely new to Mac OS, however I am a FreeBSD sysadmin. A friend of mine send me her iBook G4 which won?t boot in normal mode (stuck in "Starting Mac OS X..."). I asked her what happened and the answer was:I did iTunes and MAC OS update and when the update finished, the Mac restarted and problem started.I booted in single mode (Command-key + S) and when I got the prompt, I did "sh /etc/rc". At this stage, the output of "uname -a" is:
View 3 Replies View RelatedI tried reformatting while running Snow Leopard, but the option was grayed out and the install disc made the computer hang at the white bootup screen. I figured I'd just upgrade to Lion and do a clean install (not an option).Â
After upgrading to Lion, I booted into recovery to erase the hard drive. I did it and it took less than ten seconds (bad sign).Â
Now I can't get past recovery and the hard drive is still full.Â
Info:
Mac mini, Mac OS X (10.7)
Bought a used 2011 iMac. Wanted to wipe everything clean from previous user and install lion. After installing lion I went into the recovery mode by pressing apple r, then wiped the harddrive clean, and now am trying to reinstall lion over the internet. At first it was working fine, eta was 90 mins. When it got down to 4 mins it suddenly went back up to 90 mins and has been stuck there for 5 hours. The computer is not frozen since I can move the mouse and everything.
Info:
iMac, Mac OS X (10.7.3)
My computer is stuck on gray apple page with swirl moving and never opens-
Info:MacBook
As of last night, my MBP started acting very strangely. After entering my username and password, it would enter the desktop for a short period of time and then kick back into sleep mode; the screen would turn back to black. Sometimes it will let me stay on the desktop for a long time and other times it will hardly let me stay on the desktop. I called apple support and they had me start the computer in safe mode; even then it occasionally kicks me out. The tech guy said that it was a "strange software issue" and not a hardware issue. I thought it was a hard drive issue; my hard drive makes an odd sound when it unlocks, but it has been doing that for quite some time with no issues. I tried to reset the SMC and it didn't do anything.
I am running OS X; not leopard or snow leopard. I know I need to upgrade, but this shouldn't be happening.
I have a Mac Pro and when I put it to sleep, it randomly starts itself back up-sometimes after 2 minutes and sometimes after 3 hours. I've tried repairing permissions, maintenance, etc. and have no clue as to what might be causing this.
View 6 Replies View RelatedMy parents just bought a new Imac (3.4 Ghz/I7) which is running 10.6.8. and we cannot figure out why it won't go to sleep automatically. In System Preferences/Engergy Saver we have set both the "computer sleep" and "display sleep" to about 5 minutes, but no matter what we do it keeps showig the screen saver and never goes to sleep. The "put hd to sleep" is checked, and the start screen saver is set to roughly the same amount... I have tried adjusting these settings, to no avail.
Info:
Mac OS, Mac OS X (10.6.7)
My 13" mbp will not sleep?
View 1 Replies View Relatedmy mac is hot even if its in sleep mode..
Info:
iMac, Mac OS X (10.7.2)
I tried fsck -f fsck -y multiple times, booting in safe mode, zaping the pram and all that stuff, nothing as worked. I don't really care about how to fix it but I care more about, Is there any possible way I can get files off of the macbook even though it wont boot. Like is there a way for another computer (windows or mac) to pick it up so I can transfer files? What accessories will I need?
View 1 Replies View RelatedI have a 2.0 GHz early 2005 Power Mac G5 (7,3) that won't get past the light blue screen at start-up. I've tried everything - reset the PRAM, Apple Hardware Check (on overnight loops, everything came back OK), fsck (all OK), repaired my HD and permissions on it, and then erased the drive using Target Disk Mode and another Mac, and attempted to reinstall OSX from the install disk that came with it (with OSX Tiger). I've tried switching out the RAM with no luck.
The only thing I haven't tried is a new video card (the installed one is an ATI Radeon 9600). Here's what it does: powers on with the usual chime, then moves on to the white Apple screen, the wheel spins, then it moves on to a darker blue screen, then it finally moves on to a lighter blue screen with an arrow, and it just stays there. It will boot into safe mode (pressing shift), but I can't even upgrade to Leopard in safe mode, much less figure out what's wrong.
