I'm using a MacBook Pro (2007) and a Mac Pro. Currently I've got them connected, via ethernet, to enable me to swap files etc, and to connect to the Internet.What I would like to do is find a way to use my iSight Cam (on my MacBook Pro) through my Mac Pro.Is it possible? I know I can use it, in a way, via remote desktop, but that's not quite what I want.
Info:
MacBookPro, Mac OS X (10.6.5)
I will now have four MacBook Airs in my house (me, my wife, two kids) and would like to setup a SIMPLE way to back up all of them to a networked drive that I could connect to my Airport Extreme. Having read the horror stories about the Time Machine, I'm looking for a different solution if it's out there. Since both my kids and my wife are not too tech savy when it comes to this, I'd like something as simple as a networked drive where I can direct Time Machine to perform it's backups from each of their computers. Â
Is there a good solution that's close to plug and play to do this? I've looked at some different NAS drives online, but each seem to have different quirks to their setup.
I have an alienware desktop with 1TB RAID 0 for general purposes and a new-generation 13" Macbook Pro (4GB/GeForce 320M/250GB). Anyways I provided this information to help with a question. Can I create a shared folder on my Desktop and set Time Machine to back up to it over the network?
View 1 Replies View RelatedSince it's clear now that my Win 7 machine will never again run iTunes properly. I'm reduced to using my MBA for all my iTunes needs. My music collection is huge, of course (whose isn't?) but that's no problem because it exists on a networked drive and my MBA has no issues playing from it. However, both my iPhone and iPad are 64GB and I need to back them up.
I can't use the Cloud, of course, because it's not big enough (it's not just music or I'd subscribe to the music service on my iPad it's mostly other data which takes up 50GB or more). I can't back them up to my SSD because there's not enough room. So I really want them to backup to the same networked drive I'm using for my music. Except I don't see a way to do that in iTunes.
Info:
MacBook Air
I just bought a Belkin WIFI router that has a network storage USB port on it. I just bought a WD 2Tb mybook external drive and hooked it in to the back of the router and installed the necessary software on my Dell laptop (XP) as well as the MBP running Leopard. I'm assuming I need to partition the drive using disk utilities because the Mac needs it to be formatted especially for it and XP needs to see a FAT file system. I guess I'm wondering if I can do it and what pitfalls I should expect. Does anyone have a step-by-step for this kind of setup? Do I need to format the Windoz partition with the Windoz 'puter? Just to be clear, I intend to use the drive for backing up both computers and for general storage of each of the two computers. Should I create four partitions? Is it possible to partition a partition after formatting the other partition to FAT32 or whatever?
View 2 Replies View RelatedI have an older non postscript HP 4V on a Jet Direct, ethernet connection with a static ip address. It works fine with my Toshiba running windows xp. It ran on my wife's ibook and her MacBook, prior to a recent hard drive failure. Now I can't get it configured properly on my new MacBook or my wife's repaired one. I can ping it and a file sent to it spits out pages of garbage. I've tried using the "Generic Postscript" driver, the 4V postscript driver and the Gutenprint driver. All combinations using JetDirect Socket, IPP and LPD. If it hadn't worked on OS X previously I would suspect that it won't work, but I know it does.
View 2 Replies View RelatedI look after 27 macs using ARD. I'm fairly new to networking and wondered if there is a way that I can put a folder on the desktops of all the macs connected to my admin mac that will link to my drop box so users can easily back their work up to my machine so I can then back it up to an external HDD? Or if its possible a folder that links direct to an external HDD? The admin mac is running 10.6.2.
View 6 Replies View RelatedWhat happens when 3 people try to access different partitions at the same time on my 2 TB drive that is connected to the Airport Extreme? I'm assuming with only 1 arm something would get messed up. Example: watching Iron Man 2 from the hard drive with apple TV and then my wife starts going through photos on her MBP, then my iMac starts doing its time machine business.
View 3 Replies View RelatedI have a (newly) mixed network - Mac OS X 10.3 and Win XP Pro. I have two internal hard drives in each machine. After downloading SharePoint I was able to see the second Mac HD from the XP machine. I can't for the life of me find any reference to accessing the D: drive on the XP machine from the Mac box. It seems to me that using "Finder->Go->"connect to server" forces you to log on as a user and then only gives you access to user level and below. In other words you can't get to "My Computer" to access other drives. Links don't appear to work so I can't set a shortcut (tried the "nethood" folder under the user account but they are only links and didn't get me anywhere). I have all sharing turned on. Can access the user folder no problem. Just can't get to upper level resources.
View 3 Replies View RelatedI have my printer, epsonNX4 shared from my server to the windows boxes, but I'm trying to get it to work on the mac to.
The mac sees it and can print from it, but it prints blank pages. I went and downloaded the print, scan, copy drivers from EPSON's site, but how do I tell it to use those drivers?
It never appeared in the printer list of Add Printer popup.
Today, for some reason I can't print to our networked printer, a Kyocera FS-6950DN laser. All I am getting now is a 'Network host is busy, will retry in 10/15 secs' and the job just holds.Â
So, what have I tried. To eleminate any printer issues I have successful managed to print direct from my MacBook (also running OSX 10.6.8) without a problem. So the printer seems fine. However, if a connect directly (again via a single ethernet cable) to my MacPro it won't print. I have deleted the printer and created a new one. Actually, I have done this several times. When I go to create a new printer I can see the printer listed a a bonjour printer. I select it, then I use 'generic postcript'. I can choose the my printer here, but I seem to remember that this was a problem when I set it up originally and I was advised to use the generic option. I click add and that used to work. But not now. I have checked that the printer has a static ip address and it does. I have also tried adding the printer as an IP printer and adding the IP address etc maually, but again this doesn't work. I've tried this both with LPD set or IPP set. I get the same busy error message. Â
Trawling the net I have noticed lots of people with Kyocera print issues relating to the latest OSX Snow Leopard 10.6.8 update. Although having succesfully printed from my MacBook that would suggest that 10.6.8 isn't the issue in my case.Â
I should also say that I have done the usual... repaired the permissions and reset the PRAM etc. I have ping tested the connection from my MacPro and there is a response from the printer. It's just not finding the printer when I send the job to print?
Info:
MacBook Pro, Mac OS X (10.6.8), Kyocera FS-6950DN laser printer
After apple driver update, can't print to my networked HP 8600
Info:iMac (24-inch Mid 2007), Mac OS X (10.7.4)
I have a number of Mac's (all running Mavericks), connecting to a shared folder on a Mac we use as a 'server' (it doesn't run server software though, just Snow Leopard client).Â
Does Mavericks Mac's use the 'spotlight index' of this shared, networked, Snow Leopard Mac, or when we search it, it's just searching the actual file structure?Â
I'm having issues with searching this networked Mac (some files not being found and then a on later search they appear), and I don't know whether a rebuilding of the spotlight index on the networked Mac is a relevant troubleshooting step.Â
I have created a image of my macbook pro (2006), on a DL-R disk. (This was so that I can restore my mac without having to do any updates or having to download and install programs) However, the person who made the image for me is no longer available and as such I have no way to use the DL-R disk. Apparently the macbook pro 2006 cannot read DL-R disks. I know that apple has a networked optical drive feature for the macbook Air. Would I be able to use this feature on my macbook pro?
View 1 Replies View RelatedI have a networked printer which i can see and print to fine over a wired connection (it comes up in add printer utility)
When I switch to airport over my airport express it won't come up (Well it does for a millisecond then disappears) and if I manually add it via mdns:// it doesn't print.
Here's my setup: I have three Macs and one PC sharing a wireless network with a Belkin N+ router and a 2 TB external HD shared via the router. The HD is formatted in NTFS as a legacy of originally being mostly used with the PC (and the router will only read NTFS.) I've installed NTFS-3G to be able to read and write to the drive from the Macs. Everything works dandy.
My question: I'd like to be able to restrict access to one of the folders on the HD somehow; either to just one of the Macs, or via password. I have no clue where to start with this.
I have a G4 macMini running 10.5 and an iBook G4 running 10.4, both are connected through the same router. I'm trying to use the mini as a file server so I'd like to mount the mini and USB external drive attached to the mini when the iBook starts up. Using Finder->connect to server I can access and mount both drives without any problems. I've then dragged the drives into the login items for the account on the iBook I want them mounted on. When I load the iBook I get the 'server not responding or is not operational, check the IP address.'? It will mount then through finder->connect to server straight afterwards though?
View 1 Replies View RelatedI have a Brother HL-2270 DW printer setup on my network. I see it as an option to add, but when I select it, it says that the software is available through apple. So it makes me select "install and continue" or "cancel". If i select continue, it works on it and then says it is not able to find the software. So i manually went on to the brother website and downloaded the driver. WHen I go back to add the printer it still wants to go through the apple software databse, and as a result I cannot load the printer.
Info:
MacBook, Mac OS X (10.7.2)
I've been having a connection issue for a while where some days I can connect to our networked drive just fine and some days it fails and gives me the connection failed window.The shared drive is hard connected to an imac and I connect to it via the shared items or apple + k with the ip address. When the connection fails they both stop working.
Info:iMac (20-inch Early 2008), Mac OS X (10.6.8)
I'm trying to make it so that my students have the ability to log onto our iMacs (all running Lion) through our Mac Mini Server (also Lion). I recently had to go through drastic changes in order to simply create a directory administrator, yet it still persists. The active directory isn't binded onto the server yet. When I try to bind the my Active Directory with the Mac Mini, I get the following popup after logging in as the Directory Admin:Â
View 2 Replies View Relatedi have a small mac office with a PPC G5 and an intel G5 as my two main boxes. I currently work from a very slow raid network box - no screen, just a networked hard drive really. problem is that it is really slow working live form it. Everything is fine when I copy files to my machine first then work on it.
I can't do this as I'm in the graphics field, and all my links, pics, blah blah are on the server - linking to things like InDesign etc.i need to upgrade in here and add a new machine, but not sure on which way in terms of software for my old G5.The PPC G5 is to become my server (its got to be better than my current network server). As per software tho, because its a non-intel G5, i read that i cannot upgrade to latest software. I'm currently running 10.4.11.
Do I, or, Should I, or for what reasons - would I upgrade to a 'server' software, rather than leave it as its current tiger 10.4.11 software (non software)basically, are there major security, network, etc features of the server OSX over non-server OSX?
I want to clone my hard drive to use on my new one. i dont have an external hd enclosure, though, and would be happy if i didnt have to buy one. i was hoping i could make a clone onto my networked time capsule, then replace the hard drives and somehow boot from the clone from my time capsule.
View 6 Replies View RelatedI keep getting a printer out of toner error message when I try to print to a networked HP Laserjet m2727. The printer is connected to a D-Link router. Other PCs on the network can print just fine to the same printer.
Info:
MacBook Pro, Mac OS X (10.7.3)
I updated with show leopard and my networked printers have disappeared. I tried to reinstall but nothing did!
Info:
Mac OS X (10.6.4)
A recent post on Wired Site made me think that the 27" iMac could really be the ultimate computer for the graphic professional and offices in the graphics field. I don't know if this theory was discussed or if it is actually possible but according to Apple, the new iMac can be used as an external monitor for another device. If you bought the 27" iMac Core i7 version and hooked it up to a MacPro as a render server, that's a lot more computer for little to no more additional work space.
Also, if this is possible, you could buy an iMac now and once you outgrow it you can still use it as a monitor for a Mac Pro and utilize the quad core for networked tasks like background rendering. Futher, if everyone in your office used a 27" iMac as a monitor (as it really is only about $100 less than the 30" cinema screen) and had a Mac Pro. You'd potentially have quite a networked renderfarm without actually taking up any more physical space in your office. That is if you can make it function that way.
I have a Drobo external drive array connected by firewire to my primary home computer - a Mac Pro. the last year I've backed up two Macbook Pros (mine and my wife's) to this Drobo using Time Machine (The Mac Pro is always on and the laptops backup through the home network, through the Map Pro, to the Drobo). I recently did a fresh reinstall of Lion to all 3 computers. Now for some reason Time Machine can't kick the backup off. It gives me a "Can't backup - the backup drive us not available," or something like that.
A couple of key points:
* Through the primary computer, I have opened read/write file sharing permissions for all drives, including the FW connected Drobo
* From the laptops, I can see and read/write to the Drobo through Finder
* Through Time Machine preferences, I can select the Drobo as a backup destination - it's only when I kick off the backup that I run into the error.
* If I create a test admin account to try, I get the same problem when trying to back up.
* As a safegard, I have run a manual backup successfully to a separate external drive (mobile g-drive)
I frequently use Preview to scan documents using a networked HP scanner.Â
Every time I launch preview to perform some scanning, I find that I must select File->Import from Scanner->Include Networked Devices.Â
I find this mildly annoying. Is there a way that I can get Preview to include networked scanning devices by default?Â
Info:
MacBook Pro, Mac OS X (10.7.2)
I am running a Mac OS X 10.6.8 Snow Leopard Server and have configured a global security policy using the following command: [code] When a network user is logging in from the login screen, it disables the users account after 3 attempts.This is the behaviour I expect (maxFailedLoginAttempts=3).When a user locks thier screen, a password is required to return to the desktop (also part of the intended security policy).If a user enters an incorrect password for the screensaver, it immediately locks the the networked account. To be clear, it takes only one failed attempt to lock a networked user's account from the screensaver.I have tested local accounts set up with the same global password policy, and the screensaver locks the account after 3 failed attempts, as I would expect.Anyone know how to make the screesaver not be so fussy?
Info:
Mac Pro, Mac OS X (10.6.8), Server
I have just purchased a new iMac with Leopard. I already own a MBP with Tiger and I am trying to shares files between the two. The MBP connects to iMac and shows files easy as...however I have enabled sharing on iMac when I choose Network it recognises the MBP but always says connecting and after a few minutes shows connection failed.
View 2 Replies View RelatedI have two users defined on my macbook (one is New, and the other one, the Old one, is what I've always had).I was re-configuring File Sharing on the Old user.I turned files sahring off in the Old User, but when I log into the New, I can still acess to some folders that I have never set to be shared; only few folders have the red restricted access on it. The New User does have file sharing disabled, and non of its folder can be accessed; so, it's working Ok for this New User.Â
Info:
MacBook, Mac OS X (10.6.8)
