I have a networked printer which i can see and print to fine over a wired connection (it comes up in add printer utility)
When I switch to airport over my airport express it won't come up (Well it does for a millisecond then disappears) and if I manually add it via mdns:// it doesn't print.
I've set a wireless network and connected my multifunction printer in an AirPort Express. I can access it from my computer to print, but the scanner utility doesn't recognise it. What could be wrong?
View 4 Replies View RelatedI'm looking into buying a wireless router, I have a macbook pro and wanted to ask how the Airport express is. Is it a good router? Ill be living in a 2 bedroom apartment so the range I'm assuming should be good. Can I connect a printer or my external hdd to it?
View 3 Replies View RelatedI have a standard wireless network for the Internet, and have just bought an airport express to make my printer wireless -- thinking I could use it to create a second, separate network (with no internet connection) that just connected to the printer.
I realize that I'd have to switch networks from the Internet to the Printer if I wanted to print, and vice versa. No big deal.
But it didn't work so far. Maybe my theory is faulty.
I'm wondering if I need to also connect it via an ethernet cable to the wireless router.
Or I've just bungled the setup.
I have a MacBook with an 802.11G airport card. The express (and router) can do N as well as G.
After a surge fried my beloved HP LaserJet 1320, I purchased an HP LaserJet P2055dn. This has a built-in print server, to my understanding, with an Ethernet port that would be available for me to connect to a router. I would ideally like to share this printer between my MacBook and another computer (an HP notebook PC running Vista). What's the best idea here? Please bear in mind one thing: the HP notebook has flaky wireless, so it might have to use an Ethernet cable at some point--thus I'd like to explore all of the feasible options.
1. USB to my computer and set up printer sharing?
2. Ethernet to my computer and set up printer sharing? (Does that make any sense? Maybe not!)
3. Get a wired router and, while the computer is on my desk, connect it to the printer and to the connected computers.
4. Get an AirPort Express and connect the printer up to the USB port. Now, we're using WPA2 on our wireless network here, and I thought I read somewhere that one cannot extend a wireless network that's WPA2. Can I hook up a printer to an Express that's a client?
5. One idea that especially intrigued me: Get an AirPort Express and connect the printer up to the Ethernet port, then set up network printing on all connected computers, rather than Bonjour printing. Again, network-extending question still applies--I'm really clueless here.
Since I *have* a network printer, would network printing (i.e., option 5) be faster/better/more efficient than Bonjour printing? Less software or drivers to install? or more?
i'm using an airport extreme as my primary router for internet and everything, and i have a airport express set up in my bedroom for wireless music. i've set it up that the express is joined with the extreme so internet (from the lounge room) and music (in my bedroom) all run through one network.
i just purchased a printer which i plugged into my airport express to enable wireless sharing, and in airport utility it shows the express is connected to the printer, but while im connected to the extreme it wont let me print to it, however it'll still let me stream music to it. And to make is very frustrating because the networks are joined, it wont even let me connect to just the express to do the occasional printing that i want.
Migrating to Mac from XP my first purchase was a MacBook Pro, and now I'm trying to come up with a method to print to either my HP 8050 or HP 720C. So far nothing works.
Info:
MacBook Pro, Mac OS X (10.7.3), with HP 8050 printer
Question: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies View RelatedI just realized that when my printer is plugged into my AirPort, it does not let me see ink levels. Is there a workaround to this?
View 9 Replies View RelatedI connected my imac to aiport express and the airport express to my wireless network and to my printer.
The light on the airport express device is green and the computer suggests I am connected to it.
When trying to print, though, i get a message that the printer is off-line, and in addition, the wireless network sometimes drops altogether.
I already have a wireless network in my house. I'm about to buy a printer, but would prefer to keep the printer in a different room. Can I connect the printer to one of those AirPort Express Base Station, then print wirelessly from my laptop?
View 4 Replies View RelatedWith an Airport Express-connected printer, is there any way to configure things such that:
- I can leave the Airport Express on (as a base station)
- I can leave the printer off by default (so as not to waste energy)
- I can select 'print' within an application
- The print job queues
- I can then switch on the printer and the job will begin processing
Is this possible with an Airport Express-connected printer? The problem is that the printer is a fair walk from my office and I have to walk there to switch it on and then walk back to print and then walk back to collect the print out.
I have my printer, epsonNX4 shared from my server to the windows boxes, but I'm trying to get it to work on the mac to.
The mac sees it and can print from it, but it prints blank pages. I went and downloaded the print, scan, copy drivers from EPSON's site, but how do I tell it to use those drivers?
It never appeared in the printer list of Add Printer popup.
Today, for some reason I can't print to our networked printer, a Kyocera FS-6950DN laser. All I am getting now is a 'Network host is busy, will retry in 10/15 secs' and the job just holds.
So, what have I tried. To eleminate any printer issues I have successful managed to print direct from my MacBook (also running OSX 10.6.8) without a problem. So the printer seems fine. However, if a connect directly (again via a single ethernet cable) to my MacPro it won't print. I have deleted the printer and created a new one. Actually, I have done this several times. When I go to create a new printer I can see the printer listed a a bonjour printer. I select it, then I use 'generic postcript'. I can choose the my printer here, but I seem to remember that this was a problem when I set it up originally and I was advised to use the generic option. I click add and that used to work. But not now. I have checked that the printer has a static ip address and it does. I have also tried adding the printer as an IP printer and adding the IP address etc maually, but again this doesn't work. I've tried this both with LPD set or IPP set. I get the same busy error message.
Trawling the net I have noticed lots of people with Kyocera print issues relating to the latest OSX Snow Leopard 10.6.8 update. Although having succesfully printed from my MacBook that would suggest that 10.6.8 isn't the issue in my case.
I should also say that I have done the usual... repaired the permissions and reset the PRAM etc. I have ping tested the connection from my MacPro and there is a response from the printer. It's just not finding the printer when I send the job to print?
Info:
MacBook Pro, Mac OS X (10.6.8), Kyocera FS-6950DN laser printer
I have a Brother HL-2270 DW printer setup on my network. I see it as an option to add, but when I select it, it says that the software is available through apple. So it makes me select "install and continue" or "cancel". If i select continue, it works on it and then says it is not able to find the software. So i manually went on to the brother website and downloaded the driver. WHen I go back to add the printer it still wants to go through the apple software databse, and as a result I cannot load the printer.
Info:
MacBook, Mac OS X (10.7.2)
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies View RelatedI recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
View 4 Replies View RelatedCan anyone explain to me Airport Extreme and Airport Express and their functions?
View 8 Replies View RelatedI have an Airport Express and when I go to configure it it does not appear on the list of available networks. I have the AC plugged in and ethernet cable from my router attached to it. I get nothing! The light on the AE is green but my iBook G4 can't see it. From what I've read this looks to be a fairly simple plug and play operation.
View 8 Replies View RelatedI have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used.
Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I'm looking for a repeater of sorts, similar to the Airport express, but just not as expensive.
The issue is that my macbook drops out randomly, sometimes it just goes through phases where it drops the connection about 20 times in 30 minutes.
The issue is that the modem-router cannot be moved as its phone line based, so I think my last option is a repeater. The Express seemed ideal as its a small, simple unit that can be plugged straight into the socket, which would be perfect for where I wish to place it - is there a cheaper alternative?
Just tried to set up my Airport Express but it shows a flashing yellow light (meaning it isn't connected to my router) and it isn't even recognised by Airport Utility!
View 1 Replies View Related