MacBook Pro :: SSD Not Recognized - Unable To Install
Nov 13, 2010
I have a MBP mid 2009 ( 3.06 Ghz - 8GB Ram). Through work I managed to obtain a Lenovo 256GB ( Toshiba ) SSD. When I replace the current 500GB drive with the SSD and boot with the snow leopard (10.6.3) disc, the drive is not recognized. I go into disk utility and the only drive is the DVD drive. I put the SSD in a pc laptop and booted with a Ubuntu Usb drive and it found the SSD first go, no issue, so the drive works.
Info on drive sticker is
Lenovo PN: 45N8206
Lenovo FRU : 45N8207
SOLID STATE DRIVE
THNS256GG8BAAA
View 7 Replies
ADVERTISEMENT
Jul 7, 2009
I have a first gen white macbook core duo. I am trying to install a new 320GB Seagate HDD in my laptop to replace the 60Gb drive. I installed it but I can't get the OS to recognize the Hard disk when it is installed in the computer. I have no problems when it is installed in an external case. I have booted off the Leopard disk but it does not show a drive available to format, I booted off the original drive in the external case and the disk utilities does not show another drive attached. If I put the 320GB drive in the external enclosure, disk utilities recognizes it right away. I have formatted it with GUID format but it doesn't work when installed directly in the macbook.
View 4 Replies
View Related
Aug 31, 2009
I'm trying to install Snow Leopard on my month-old Mac mini—regular upgrade, no clean install—and with about 20 minutes left to go, the monitor stopped being recognized by the mini. I have no idea what's going on with the installation. Is this normal? I've let it run for the past 10 minutes or so. Every time I hit the power button on the HP monitor, it scans for a connection and then goes to sleep after not finding anything. It makes me nervous that I can't see what's going on. Most of the time the mini is quiet but every couple minutes, the superdrive starts spinning.
View 1 Replies
View Related
Jun 20, 2009
My G4 graphite is acting strange, I put in a hard drive the size of 160 GB, yet when trying to install mac os x server it reads it as thirty, what would cause this ?
View 1 Replies
View Related
Jun 30, 2009
I' finally getting around to boot-camping my last generation Mac Mini running Leopard. I got the partition created just fine and the XP disc booted just fine. Now for the problem: When I'm giventhe option to install, repair, or quit Windows XP Set-up, I can't select anything. My keyboard, an Apple Wired USB Aluminum, isn't recognized.
View 5 Replies
View Related
Jan 6, 2010
when I install a cd-r the message appears that the disk is not recognized and no icon appears on the desktop. I am unable to copy to the disk.
View 1 Replies
View Related
Jul 18, 2009
I am using Windows 7 with boocamp. Just suddenly without changing anything windows 7 stopped recognizing my battery, and is unable to connect wireless. It just gives me an unable to connect error, no more information is given. I found someone on an other forum with exactly the same problem. [URL].
View 4 Replies
View Related
Sep 12, 2009
So, I got the Polycarbonate Macbook , Parallels 5, and Windows 7 Home Premium. I installed windows on bootcamp and had parallels use the partition for windows and I got it all working, all the drivers on Windows are great, except the wifi. It's not even saying I've got a wireless card installed, it won't recognize that I have one in my Mac. But when I use parallels and when I boot it as a regular Mac, it works great. I've looked around and haven't found an answer to this? Anyone found a solution or could help?
View 10 Replies
View Related
Jul 3, 2012
After a fatal mac crash (PPC 10.5) i had no option but to reinstall the OS (10.5), i obviously didnt reformat the drive in the hope that i would be able to recover some if not all of my data. Using various tools i was happily able to recover most of my data successfully, including 3 AES encrypted Disk images of around 30GB in size each.
I didn't hold out much hope for actually recovering the data inside the dmgs, although after some fiddling i was able to recover 2 of them fully after receiving the no mountable file system error, i dont know how i done it but nonetheless i dont appear to have lost any data from those two dmgs whatsoever. Now the third dmg (also about 30GB in size) never gave me the no mountable file system error and instead returns the error: unable to mount: not recognized. Im pretty sure that my data is still there somewhere due to the sheer size of the recovered file, tied with the fact of the success of the recovery of the other 2 disk images. I have read every post i could find on this site and have trawled the web tirelessly looking for a solution to this, but have yet to find anything that even comes close - the closest i have found was a post on this forum where it would appear an apple engineer was able to recover most of the data using some sort of magic.
I am not in a position to pay for professional data recovery and besides i would love to see a solution to this problem appear somewhere on the web. I have tried the usual, rebuilding permissions, mounting on another machine (imac G5), resizing with disk util, repairing with disk warrior, converting to ISO - all which return the same error - not recognized! I have tried every terminal command i have found on the web, although decyphering some of the information is a little out of my remit and my knowledge of HEX is limited. I haven't yet tried Toast, basically because i dont have a copy, but it would be my guess that this would return a similar result. Incidentally when i recovered the original data, there were some small (what appeared to be dmgs) files around only maybe a few Kb each with part of the file names of the original files, i'm guessing these maybe the headers or something like that? although i didn't have to do anything with them to get the other 2 disk images working again.
Info:
iMac, Mac OS X (10.5), Disk Image error
View 4 Replies
View Related
Dec 10, 2008
My daughter recorded something on iMovie, but she wanted to import some video she took from our camcorder. She put the video on a DVD but she can't seem to drag the video onto her existing iMovie.
I called Apple's support service and they suggested I try loading the video directly from the camcorder but they couldn't help me with that as it's not an Apple product (the camcorder is a: Sony) They suggested to put the camcorder on some type of mode that the computer could recognize????
The other suggestion they made was to get a third party application that can "rip" the images from the DVD so it can be imported into iMovie. Again, they couldn't help me because it's not their product.
I'm not very really familiar with any of these things so I was hoping someone would be willing to help me figure it.
View 7 Replies
View Related
Jun 29, 2014
Have a MacBook Air using iPhoto 9.5.1 and operating system OS X 10.9.3.
I have tried to share photos with email using my Yahoo account. I receive the following message whenever I attempt to send a photo "username/password not recognized by email server."
I have gone into my accounts numerous times in System preferences. My username/password combo is recognized there. I have also changed my password on Yahoo and in my accounts. But I still receive the above message.
View 2 Replies
View Related
Dec 20, 2009
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
View 5 Replies
View Related
Dec 20, 2009
I am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code:
Requires Samba to perform SMB lookup features.
Requires the following perl modules:
Net::Pcap;
NetPacket::Ethernet qw(:strip);
NetPacket::IP qw(:strip);
NetPacket::TCP;
NetPacket::UDP;
DBI;
Unicode::String qw(utf8 latin1 utf16);
Proc::Daemon;
Proc::Simple;
FileHandle;
Unix::Syslog;
GDBM_File;
View 2 Replies
View Related
Nov 4, 2008
i have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work
2. erased hd..still did not work.
3. made partition to install from external hd...now just made a total mess with computer.
4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
please help i dont know what to do!!!!!
love my mac. buy i messed it up....
View 7 Replies
View Related
Nov 10, 2010
i bought a new HD because i couldn't get my old HD to boot up. the old HD has the annoying flashing folder with a question mark. With the new HD, I was unable to install the OS X it said something like can't installed on this computer?
View 2 Replies
View Related
Jan 18, 2010
So we replaced our 15 inch macbook pro with a 500 gb hard drive.
We first tried to install snow leopard with no success as it would just load a blue screen then restart. Then we tried to install the original software that came on the mac this loaded up to where we could install it but it did not see a hard drive to install onto.
View 2 Replies
View Related
Nov 4, 2010
I'm trying to install programs, I get past the agreement page and as soon as i start putting my password in the spinny disc starts spinning... its looks like its installing, writes all the files and when it looks like its installed it says failed, contact manufacturer... I thought maybe it was just that program so I tried a different one and the same thing.
View 1 Replies
View Related
Apr 2, 2008
Migration issues with MBA from welcome screen!!! Does not finish keeps searching for information. Apple tech support advised to load OS on again. MBA gets lost loading OS ??
w' issue for no prompt for disc two! This leaves you with partial OS!!! Apple knows it is an problem now. MBA not as tight and tested as my other Apple products.
Oh, how I wish they had fire wire option! I have returned and will wait for issue to settle down. Neat box too many potholes. Have a good time reaching the MBA tech team.
View 1 Replies
View Related
Jun 12, 2009
I am new to mac, I have a macbook on 10.4.11 OS. I am unable to install any .pkg files, I tried to install a driver for wacom tablet ( I get the file from wacom website, apple site directed me to there), my laptop cant open the file, it gives no error code neither, it gives no respond no reaction to my click, double click and try to use open with "installer" move. I did check, in my utility dir there is a installer, but I dont know why it cant install/pkg files for me. I also checked crash reporter under log, there is no crash report log for installer. Same story happens to canon printer driver .pkg file too. I also lose the disks went with laptop so I may have difficult to reinstall the system.
View 9 Replies
View Related
May 31, 2012
Computer: Macbook Pro 15" 2.66GHz i7 / 4GB DDR3
Model #: A1286 (Mid 2010)
OS: SL 10.6.8
Having some issues with MBP (slow performance, Oulook issues, etc.), attempting to resolve by repairing disk permissions and repairing disk. Disk Utility returns the following: Incorrect number of extended attributes(It should be 390460 instead of 390459) The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. ...then use Disk Utility to repair this disk. Disk Utility stopped verifying "Macintosh HD" This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. So, I was unable to find my OE cd's. I purchased the SL Replacement Install DVD from apple and attempted to boot from it. Holding c or option during startup to attempt to boot from DVD were unfruitful. Computer hangs on Apple logo, allowed to sit for 20+ minutes with no progress. DVD spins up and can hear it, then stops. SuperDrive works fine when booted and can read DVD no problem. Reset PRAM during startup successfully, hold c or option and no luck - still hangs. What more can I do?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
Jun 6, 2012
I have purchased Lion OS X, and the icon to install it was there in my applications. However, when I start it, it tells me that it will install, and the computer will restart. And when it restarts, the same old OS X 10.6.8 is there, no change.
Info:
Mac mini, Other OS, Lion OS X
View 5 Replies
View Related
Jun 26, 2012
Every time I try to update the software (when the Software Update" panel opens up), I can download the software but after downloading it says "Unable to install software" "An unexpected error occcured".....
I have plenty of HD space (100G available out of 320G), and I've tried repairing permissions, restarting etc but I still get the same error message.
Info:
MacBook, Mac OS X (10.6.8)
View 1 Replies
View Related
Sep 16, 2010
I am trying to partition my Macbook to install Windows and am having the following error
"The disk cannot be partitioned because some files cannot be moved.
-Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
View 6 Replies
View Related
Nov 18, 2010
I have an aluminum macbook, from made around January 09. The issue is I need to repair the hdd using the osx install disc. The problem is that when I try to do so, boot using the disc, it just restarts to the hdd, it will not boot from the disc. I try holding c and I have tried setting the disc as the startup disc and it just goes in this never ending circle of restarting and restarting. I've never seen this before.
View 3 Replies
View Related
Nov 27, 2010
My late-2007 Macbook's hdd got screwed and I bought a new one.
Now I try to install Snow Leopard 10.6.0.0 but Macbook won't boot from the install disc.
It spins the disc a couple of seconds and then ejects it.
Key commands don't help. Startup manager won't show up if I keep pressing the option key during startup and same goes with pressing c for booting.
View 3 Replies
View Related
Dec 11, 2010
Insecure Startup Item disabled. "/Library/Startupitem/M-Audio Firmware Loader" has not been started because it does not have the proper security settings. I tried to install the program and it looks like it partially installed But I have no idea. I am pretty technologically illiterate.
View 1 Replies
View Related
Feb 10, 2009
I bought OSX 10.5 Leopard about 3weeks ago and still have not been able to install it onto my macbook. When I put the disc in for the first time I went through the standard procedure of clicking install OSX and then restart when it restarts however it goes to the Grey screen with the apple and the spinning loading symbol and just sits there forever.
I thought it was the disc so I took it back and ended up with the exact same problem. I then thought maybe I should just use my factory disc and wipe out everything on the hard drive. It gave me the same problem as trying to install Leopard.
Then I thought maybe it was my CD/DVD drive. Nope! It perfectly played a DVD and I was able to install Photoshop CS4 through the CD/DVD drive as well.
A Month later I am stock with a Macbook that won't budge. I am no longer under warranty so I am trying to see if there is a way that I can fix this problem first before taking it to the apple store where I know I will get charged...I love Apple but I must confess this task would be easier to complete on a PC.
I tried going to disk Utility and erasing the drive and that did not work either because it doesn't give me the ability to click the erase button when I click the Hard Drive. I got this computer from my friend's sister and apparently I am finding out that she had the computer's Hard Drive partitioned and running Windows XP on it on the TIGER OS.
I am not sure if this has anything to do with it but I think it may be a factor as to why the OS disc both Leopard and Tiger (factory disc) will not write to the hard drive. I'm thinking maybe there are some permissions or something not allowing it to write to the drive or something to that nature.
My idea is to wipe out the Hard Drive completely I don't need anything that is on it I already backed it all up. But how would I do this? Is there a program I can use? Can I take the hard drive out and take it to a computer repair store and they hook it up to something erases it all? or should I buy a $40 HD from eBay for the macbook?
View 6 Replies
View Related
Oct 5, 2009
So recently I purchased a new hd for my macbook (250gb). My cd-rom drive has an error on it and will not install mac os x all the way. I have been told to use a firewire and use another mac to install onto my computer. So I am using my room-mates MacBook Pro and his firewire to do this. So I plug both computers into eachother via firewire and I boot up my macbook in target mode. The target mode sign appears on my computer and my new hard drives icon appears on my room-mates desktop. I already formated my new hard drive. I am absolutely clueless on where to go from here. I tried just popping the os x tiger disc into my room-mates macbook pro but instead of installing it onto my macbook it tries to install it onto my roomates macbook pro. How do I go about installing os x onto my macbook?
View 14 Replies
View Related
Feb 4, 2012
I am trying to install microsoft office but in the middle msg came to close safari in order to complete installation. However safari window is already closed .Please guide what to do???
View 7 Replies
View Related
Apr 29, 2012
I just bought the newest 13 inch MacBook Pro. I've read over all my specs and stuff it looks to be compatible with my macbook but every time I try to install it as a trial it just comes back with a message "unable to recognize" so does that mean its not compatible?
Info:
MacBook Pro
View 3 Replies
View Related
