MacBook Pro :: Unable To Boot From SL Install DVD?
May 31, 2012
Computer: Macbook Pro 15" 2.66GHz i7 / 4GB DDR3
Model #: A1286 (Mid 2010)
OS: SL 10.6.8
Having some issues with MBP (slow performance, Oulook issues, etc.), attempting to resolve by repairing disk permissions and repairing disk. Disk Utility returns the following: Incorrect number of extended attributes(It should be 390460 instead of 390459) The volume Macintosh HD was found corrupt and needs to be repaired.Error: This disk needs to be repaired. ...then use Disk Utility to repair this disk. Disk Utility stopped verifying "Macintosh HD" This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk. So, I was unable to find my OE cd's. I purchased the SL Replacement Install DVD from apple and attempted to boot from it. Holding c or option during startup to attempt to boot from DVD were unfruitful. Computer hangs on Apple logo, allowed to sit for 20+ minutes with no progress. DVD spins up and can hear it, then stops. SuperDrive works fine when booted and can read DVD no problem. Reset PRAM during startup successfully, hold c or option and no luck - still hangs. What more can I do?
I have an aluminum macbook, from made around January 09. The issue is I need to repair the hdd using the osx install disc. The problem is that when I try to do so, boot using the disc, it just restarts to the hdd, it will not boot from the disc. I try holding c and I have tried setting the disc as the startup disc and it just goes in this never ending circle of restarting and restarting. I've never seen this before.
My Macbook is starting to get really slow. I've tried Onyx and it told me that the startup volume had to be fixed. But I can't boot my install DVD by pressing "C" in the startup.
I am using a Late 2009 Mac Mini. This afternoon I did a software update, it was 4 programs that were updated. I didn't take a look at what was updated, which was a mistake, I know. But anyways, they installed fine, and the Mac rebooted, it got to just before the user select/login screen and hanged there. I was able to move the mouse around, but nothing else, and after a long period of time, I powered off my Mac, and now it is hanging at the Apple logo.
I tried booting into Safe Mode, and the grey progress bar would appear but and get half way through and then disappear. Next I tried inserting the Install DVD, hold down C while it was booting up but that wouldn't do anything.
Ok lately My Mac OS X has crashed on me and I am now stuck on my windows bootcamp partition.
My CD drive is broken so I bought a new external combo drive which works fine! When i go to boot the cd It loads up fine on the alt/option screen however when it goes to the loading the cd (the apple sign) it stays there for a couple of minutes (no loading wheel) and then turns into a prohibition sign!My mac drive before this was formatted as it was faulty however it is still of the MAC format! (HSF or something)
I own every piece of software and hardware from Apple there is and I cannot understand that it seems that everything is about the iPad and iPhone right now. I have been having these issues since I got my 27" iMac. I can install Windows 7 just fine on my MacBook Pro and my previous 24" iMac.
Ever since I got the 27" iMac I get a black screen when installing Windows. I have found some posts that have a way around it, which seemed to have worked but now I am getting the blue screen of death. Doesn't matter if Windows 7 is supported by Apple or not but Boot Camp is and it should be corrected.
There is no excuse that after 6 months this issue has still to be addressed, all Apple talks about now is iPad and iPhone, I am sick of it. BTW I own an iPad and I don't see the big fuss about it, I bought it mainly to read books and watch Netflix on the go.
so I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Yesterday my screen (30" Apple Cinema) started showing symptoms of graphics card failure, jagged lines across the screen. I rebooted my Mac Pro and it was gone. Then it happened again an hour later, this time the machine didn't boot, I get the Apple logo, and then it hangs up and the screen is shifted to left (I get apple logo on left side of the monitor instead of the middle) and jagged lines all over.
So the first thing I tested was using Target Disk Mode, it works. I can access my Mac Pro's internal HD's by TDM from my MacBook Pro. Then I tested single user mode, it does boot, I can't read what's written since the screen is shifted to left, but if I type (without seeing) reboot and hit enter, it reboots. So I assume the single user mode is working.
What else can I try to 100% make sure it's my graphics card that failed and everything else is ok with Mac Pro? I already ordered a graphics card replacement but I wouldn't like to be surprised if the Mac Pro still doesn't boot when the card arrives. It won't boot from Apple Startup DVD either. Same thing happens, gray logo then kernel panic with jagged lines all across the shifted screen.
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
I installed leopard on it while back but it originally came with tiger. lost the recovery cds. I want it back to tiger. When i put the original tiger dvd in it will say in cannot install the software. so i figured i use TDM to connect it to my imac(running leopard) I used disk utility to erase the HD and did repair disk afterwords. I tried to boot the dvd using the c button on the MB but i would respond and went to the question mark folder.
How can i get tiger back on my MB please don't ask me why i want tiger back and what leopard off its not really relevant.
I've been trying to get this working with a 2 drive setup on my mid 2010 i7. The biggest issue I'm having is that the windows 7/Linux distros won't boot from an external usb cd drive with the 2nd drive installed. This works flawlessly with just one HDD and the normal SD installed. Refit is installed. The windows install gets stuck at "windows is loading files", it hangs while trying to load disk.sys. As for Linux, refit complains that apple's efi firmware does not well support legacy booting. Has anyone successfully booted win7/Linux from an external USB cd drive?
Disk utilities says I need to boot from the install disc, but I can't get my computer to boot up from the install disc. I tried holding down the C key (the letter C), both lower and upper case, but it still boots off the hard drive. Is there a special way I am supposed to initiate the reboot? I just hit the power button to bring up the little window that has buttons for Restart, Sleep, Cancel, and Shut Down. So I held down the C key and clicked the restart button. I also held the C key till the sign-on menu came up. I am running Leopard.
My brother's MacBook Pro (2009 13") won't boot from the Leopard install DVD. Here is what happened:
- I tried to do Bootcamp on it. I installed Windows 7 but realized that there were no Bootcamp drivers for that. - Deleted Windows 7 and put the XP install disc in. Somehow, it formatted my Mac partition instead of my Windows partition. - Now that the MBP was only running Windows XP, I connected it to my iMac in target disk mode and wiped it (GUID, one Mac OS Extended (Journaled) partition). - I tried to put the Leopard (10.5.0) install DVD in there so I can restore from the Time Machine backup, and it sees it when I hold option at bootup but refuses to boot from it. - I reset the PRAM and tried again, no luck.
Does it have to do with the fact that it was doing Bootcamp? I either want to boot from the disc or somehow restore from Time Machine some other way. I can use another computer (my iMac) if I need to.
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
We've got a MacBook that's not booting. It gives a question mark when we turn it on.
I've tried resetting the PRAM and SMC, to no avail.
I've tried booting holding Option to list all bootable volumes, and nothing is listed unless I put the install DVD in.
I've booted from the restore disks, and tried to reimage the MacBook, but no volumes showed up to install to.
I tried Disk Utility off the install DVD, and it listed no bootable volumes.
I tried System Profiler off the install DVD, and it said "There was an error while scanning for Serial-ATA devices."
Is this absolutely for sure a hardware issue? this guy seems to have solved almost the same problem without, but I'm not able to reinstall like he did (it gives me no volumes to install to).
I don't have much time and need to know whether to send it in to Apple or not. Being that we're past 90 days, they won't give us tech support over the phone, so if it's not a hardware problem, we're going to get charged, and other circumstances dictate that the computer either be fixed or installed ASAP.
I was using my MacBook pro, it required an update, when the update was finished and it went to restart. It began to restart like normal, the chime went, the fan startedup, it went to the grey screen with the apple, the wheel started turning but that's as far as it gets. It won't go further then this screen, the wheel just keeps spinning.
Out of no-where my MBP froze after bring it out of sleep mode. I held down the power button and when turning it on it stuck at the grey spinning circle screen. I tried:
1) reset PRAM
2) booting to recovery partition and repair permissions and disk.Disk repair failed, can't recall the exact error.
3) booting to 10.7 CD that I made from my Lion AppStore download and repairing permissions and disk. Disk repair failed, can't recall the exact error.
I had a spare drive lying around so I opened it up and replaced the drive. Booted to the Lion DVD, formatted the drive and install Lion. Everything installed no problems. After the install I downloaded all of my applications and starting restoring all of my data from a backup drive. After getting almost all of my things set up to my liking the machine hung. I held down the power button and then pressed power again to turn on the machine. After the Apple logo screen the dreaded flashing question mark came onto the screen.
I can take either of these two HDDs and place them into an enclosure and read/write data on the disk without a problem so it seems unlikely that I had two bad (flaky) HDDs. I tried inserting my 10.6 and 10.5 install discs and holding D before the grey screen to start the hardware diagnostics tool but it just boots onto a black screen with a white cursor in the top left corner. I'm afraid to let it sit at this screen too long because the machine gets pretty hot near the display hinge.
I am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code: Requires Samba to perform SMB lookup features.
My MacBook won't turn on. I hear the noise (not from the speakers but from the inside, like the hdd or something) but nothing shows up on the screen. I tried to boot from the Mac OS X install disc, but now the disc is in there and not coming out, and when I turn the computer on i hear the cd/dvd drive instead of hard drive.Still nothing on the screen. This is a follow up to the behavior I described in this topic:[URL]
Just got my first Mac last night, MBA 2.13/128SSD. So far it's been a questionable purchase, the two things I need it to do I cannot do with Mac OS X and Safari. Need to use a digital ID for law school which won't install in safari and can't watch Real Player lectures as I cannot enter log in info. Installed Vista Ultimate using Parallels (have not tried VM Fusion) and it works but the videos lag.
I partition 10G in Boot Camp and tried to install (1st) Vista Ultimate, (2nd) XP, (3rd) XP SP2, (4th) Windows 7b, none of them worked. After I set the partition and select to install, the Mac reboots and then the gray Apple screen appears with an Apple Logo and Folder. I've searched for hours on Google and I can't find a single article that answers my question as to why this is happening and how to avoid. I realize I cannot use XP, but Vista Ultimate and XP SP2 and possibly W7 should have done something..
I was excited to get my hands on our family's 'family' copy of Snow Leopard to install on my MacBook running Tiger 10.4.11... I'd checked out tutorials on youtube (http://www.youtube.com/watch?v=loFUyDjCbK8) on how to clean install Snow leopard onto a blank hard disk, and was all set to bring my OS up to date...
I inserted the Snow Leopard DVD and restarted and immediately held down the 'c' key and then... 3 minutes or so of the loading icon ticking later and the DVD was rejected and I only had one button to click on, 'Macintosh HD' to start up from.
After re-trying several times I thought it was because I was trying to do it with Snow Leopard on my MacBook running Tiger so I tried restarting this time with disk 1 of the Tiger DVD. This was rejected too!
So currently I am not able to wipe my hard disk as far as I know because I can't get to this screen to start the process (unless it's possible to do from within Tiger and if it is then I'm just worried that if I wipe it and I can't restart from the DVDs then I'll be in even bigger trouble).
Has anyone encountered problems like these and does anyone know of a solution? I've never had any problems with my DVD drive in the past which leads me to suspect it's not because of that.
I have a uMBP 2.26GHz with 4GB and 500GB HDD. I usually do the Disk Utility every once in a while and it recommended me to use the MAC OS X disk and repair the disk. I inserted the disk, restarted and held "C" and the disc was running and everything. Like 1 minute later my display went black but I can still hear the disc running. But that's all it happens. Everything runs but my display went black. This is a 3month old uMBP. This is the log from the Disk Utility
Verifying volume "Macbook Pro HD" Performing live verification. Checking Journaled HFS Plus volume. Checking extents overflow file. Checking catalog file. Missing thread record (id = 782820) Missing thread record (id = 962550) Incorrect number of thread records Checking multi-linked files. Checking catalog hierarchy. Invalid volume directory count (It should be 54635 instead of 54637) Checking extended attributes file. Checking volume bitmap. Checking volume information. The volume Macbook Pro HD was found corrupt and needs to be repaired. Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I have this MacBook Pro from a friend and he asked me to repair it. I can`t: boot the Mac OS X install DVD and Snow Leopard , enter single-user mod (freeze), enter verbose mod (freeze), enter safe mod (only the apple appear and nothing happen) and whatever you can think off.I tried to reset using comand + option + o + r and ANYTHING you can think off. It just open with a flashing folder with a question mark on it. Btw i format the hard drive on my windows ( in hfs+ of course).
