When I run SMC my fans kick to 4000rpm and SMC shows that my default speed is 4000rpm, I cannot put it lower then 4000 only higher. I have tried uninstalling the program and reinstalling.
View 3 RepliesWhat's up with this in the newest version of SMC that just came out today? The min now goes below the original 2500 RPM that the Apple engineer's decided on??
View 12 Replies View Relatedgot a problem, after i bought the new macbook pro 13'':
i noticed that the fan speed is always about 2000rpm... doesn't matter, whether the temperature is at 40�C or at 70�C or 80�C (my mbp doesn't get hotter)... always same rpm.
is that normal? additional info: i downloaded istat menus 3 which has the option to control the fan speed (i deactivated it... no changing... always 2000rpm). did istat crash the internal fan speed control?
I installed (and subsequently uninstalled) two different fan control programs... Since then, my fan speed has increased somewhat dramatically. Instead of the normal 2000 rpm (approx), it now runs at 3500 to 4500 rpm with CPU temps between 55 & 65 deg. C. I'm wondering if one of the programs modified some fan setting and how I can restore the factory defaults. I'm on a Macbook Pro OSX 10.6.8 *additional note: I only have one fan running (left fan), which is why I downloaded the fan control programs in the first place... but the left fan was running at around 2000 rpm even though it was the only fan (until I installed those programs)
Info:
MacBook Pro, Mac OS X (10.6.8)
My fans make a slight bit of noise... like they're flapping against a part, a fast-ish clicking noise. It's faint, but when working in silence, quite annoying. I think this is a flaw and i'll have to send it back...
View 6 Replies View RelatedI have an iMac 9, 1 (the '09 model). 3.06 GHz DC. So I tweaked the fan speed a little to see how cool it can get, but, there's one tiny problem. I used "smcfancontrol_2_1", I can get the speeds up, but not down.
View 2 Replies View Relatedi am new to mac and coming from linux. got my mac pro about 3 weeks ago and i am wondering if there is something similar to powernowd or cpufreqd under osx to control the cpu speed and voltage of the 8 core monster. i mean there must be some power saving features in osx for the macbook series i guess and i want to know if there is something similar for the pro series.i am not sure if i better asked this questions in the osx forum but its somehow mac pro related. so are there any power saving features cpu speed or vcore related for the desktop mac series in osx right now?or is it maybe not supported yet because the hardware is so new?
View 5 Replies View RelatedI was wondering if there is anyway to change the default volume setting on my Mac Book Pro? When I plug my headset or earbuds into my Mac Book Pro, the volume automatically increases to half way. Which in some cases, actually most cases, its blasting. I've adjusted the volume in system preferences and nothing works. Is there a terminal command or a change to a Plist to control this before I?m forced to sue Apple for causing my deafness?
View 2 Replies View RelatedAnyway I can control the fans for my Powerbook G4 so it starts to pump air out at an earlier time than 63C? I tried G4 fan control but it never saved the settings (was at default after restart) and not sure if it even worked.
View 2 Replies View RelatedIs there a way to change the Volume control keys? I have a new keyboard with no media control keys. How can I assign the volume control functions to other keys of my choosing? I hope it's possible.
View 1 Replies View RelatedDuring the summer, I don't have A/C in my house. My temps were getting pretty high, around 55C/130F for processors and up to 78c/172f for ram. That is pretty high, and I suspect it is because the ambient temp in my room is somewhere in the 90s. I am just very acclimated to the heat, and it doesn't bother me.
I downloaded SMC Fan control and bumped the min fan speeds up to:
1250rpm for Exhaust
1150rpm for CPU
800rpm for Power Supply
1350rpm for HD
This has made a tremendous difference. CPU is down over 20C and ram is down about 30-35C. Are these fan speeds safe? What are the Mac Pro fans rated at, and will the increased speed shorten their lifespan? I'd like to keep these current fan speeds if it is safe.
Just downloaded and installed this app, been using it for a few hours, I am a fan. Just a quick question, it won't seem to let me set the minimum fan speed below 2000rpm (the standard level for the app), is this normal, I thought I remembered the apple default being lower?
15inch UNI MBP, 2.4 ghz, 2g ram, 250hd by the way
I'm not sure how this has happened, but my Mission Control has become mirrored from the default settings. The "X" that appears to close programs now shows up on the left hand side of each Desktop, and the pop-out desktop that I am supposed to click on to create a new desktop is now showing up on the left hand side of my screen instead of the right hand side of my screen. Is there a way to restore Mission Control to it's default settings and configuration?
Info:MacBook Air, Mac OS X (10.7.4)
Does the base speed mean the minimum speed for the fans to run at? Or, is the speed the fans will run at all the time?
View 1 Replies View RelatedSorry for the title but I couldn't think of anything better. Hopefully I'll be able to explain my problem. I have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...). I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
View 3 Replies View RelatedI have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...).
I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
Does it hurt the computer... If the computer is doing something (watching flash, playing a game) that turns on the fan full speed;Does this hurt the computer? There are a few games I like to play and they turn on the fan at full speed (computer gets hot too, on the bottom.)
View 1 Replies View RelatedI am interested in adding a webcam to my desktop Imac (power pc)- Isight is no longer available- an option that I found is the Ecamm Image- but apparently it is USB and not firewire and it will only run with high speed usb- how do I know which type is on my computer? I checked system profiler but quite frankly wasn't sure of the designations.. does anyone have any experience with this camera, by the way? is USB 2.0 by definition "High Speed"?
View 6 Replies View RelatedI have a WDS local network at my house. I use a Airport Extreme in my main part of the house and a Airport Express for my back part of the house i.e. the backyard. Now every two weeks or so my internet speed through my Airport Express slows down about half the speed but when I am connected trough the Airport Extreme my speed is normal. I know this because I test my connection very often. Now when I want the Airport Express to get back up to speed I have to unplug, and plug it back in. Then after awhile it starts to slow down again in a time period of two weeks or so.
View 4 Replies View RelatedHave an Extreme base stations and express repeater connected to my DSL services. On my primary iMac connected via ethernet I get 5.25MBps speed. The speed on this computer is always constant. On the remote MacPro I get anywhere from 1.5MBps to 5MPps speed within a half hour of testing.
View 1 Replies View RelatedI'm using Data Rescue III on a USB powered hard drive with and it's taking a very long time with my iMac G5... It says 42,291 hours remaining (about 5 years) If I did it on my Mac Pro would it go faster, or is the recovery speed based on the hard drive speed?
View 4 Replies View Relatedi have a 1.5 Mbps AT&T DSL connection, and multiple speed tests show a download speed of 1.2 Mbps (and 200 Kbps upload). when i download files, such as software updates from Apple, various podcasts, and even Silverlight from Microshaft, the speed is always between 140 - 160 Kbps. i contacted AT&T, and the rep said it was because of buffering by the servers i was receiving the files from. is this a reasonable explanation? is this an accurate use of the term "buffering"?
View 3 Replies View RelatedLast night my fan kicked into high gear all of a sudden. I shut it down overnight and when booting up this AM I find it still running on high...quire noisy, of course. Is there something overheating? How to make it run at normal speed?
View 1 Replies View RelatedI generally get about 700kbs download speed, which is what my ISP (Sky uk) tells me I SHOULD have, but they also tell me that my router upload speed should be similar and it's not anywhere close to it.
View 19 Replies View RelatedI find OS X's TTS engine on SL to be not fast enough on full speed. Is there a way to hack the plist file or something to speed up the dictation past the max speed?
View 1 Replies View RelatedI've got a real odd problem with safari 4. For some reason it is cutting my download speeds in about 1/2 from my server and many other places.
If I restart safari I will be able to download close to my 18 Mbps for a little bit but then it will just start to slow down and after about 30 minutes it will be down to about 6 - 8 Mbps.
Now, obviously I can use VNC, and I do...but let me explain.
I'm back at university this year and I've brought my iMac with me as well as my MacBook Pro. I have my MBP on one side of my desk and the iMac next to it. What I'd like to be able to do is move my mouse (using my MBP) onto the iMac screen and control it and use my MBP keyboard to enter data into it. I've tried Screenrecycler which allows me to use the iMac as a secondary screen to my MBP but the lag just isn't good enough to work with on a daily basis. I want the iMac to be it's own machine doing it's own thing, just using the input of my MBP.
Should I be worried?
My concerns are that it might be too close to the screen and that I paid $1000 for a problem. Is there any way that I might be able to fix it without going to the Apple Store?
when i look in fan control, it says that the left fan is moving at 2xxxrpm ..but my right fan says its moving at -1. is this normal? or is my right fan broken?
also...is this program safe to use? i tweaked the fan speed to 1900rpm (not sure what the default rpm is...)...this won't mess up my machine will it?
btw i have a 2.2ghz blackbook.
just 2 days ago the SMC fan control start to ask for user password everytime i wake my MBP from sleep. i had install SMC fan control for over 2 weeks now and never did that before until 2 days ago. anyway to turn that off?
View 6 Replies View Related