I find OS X's TTS engine on SL to be not fast enough on full speed. Is there a way to hack the plist file or something to speed up the dictation past the max speed?
View 1 RepliesHelp! My internal fans speed up on boot (sounds like a jet engine!) and don't ever stop! My machine doesn't get past this phase, either. I have reset the SMC, and was cleaning the system for dust, etc, just before this situation occurred. After the cleaning, I was able to boot up fine. Then I had to re-open the machine and adjust something. I put the panel back on, rebooted, and the fans churned up like a Blackhawk helicopter, and didn't stop! So, I unplugged the power supply, waited ten minutes, then reconnected the power supply and powered the machine on. The same result! The fans just don't stop.
Info:
Mac Pro, Mac OS X (10.4.11)
Sorry for the title but I couldn't think of anything better. Hopefully I'll be able to explain my problem. I have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...). I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
View 3 Replies View RelatedI am interested in adding a webcam to my desktop Imac (power pc)- Isight is no longer available- an option that I found is the Ecamm Image- but apparently it is USB and not firewire and it will only run with high speed usb- how do I know which type is on my computer? I checked system profiler but quite frankly wasn't sure of the designations.. does anyone have any experience with this camera, by the way? is USB 2.0 by definition "High Speed"?
View 6 Replies View RelatedI have a WDS local network at my house. I use a Airport Extreme in my main part of the house and a Airport Express for my back part of the house i.e. the backyard. Now every two weeks or so my internet speed through my Airport Express slows down about half the speed but when I am connected trough the Airport Extreme my speed is normal. I know this because I test my connection very often. Now when I want the Airport Express to get back up to speed I have to unplug, and plug it back in. Then after awhile it starts to slow down again in a time period of two weeks or so.
View 4 Replies View RelatedI have a MPR 2.53 ghz, 4 gig ram, I'm using Safari 4.04. I am using the WIFI at a guesthouse in Thailand (but I had the same issue in China, Vietnam ...).
I ran a speed test and it said download 7mb/sec and upload about 1mb/sec. I have an "app" that says bandwidth in 1.3kb/sec out 1.0kbs. I thought maybe it was Safari so I downloaded and installed Firefox. firefox gives me similar speeds. When I downloaded Firefox though I had a download speed of over 1mb/sec. But as soon as it finished downloading the speed went back to around 1kb/sec. I have rebooted my MBP many times. I did some Google searches but didn't find anything helpful.
Have an Extreme base stations and express repeater connected to my DSL services. On my primary iMac connected via ethernet I get 5.25MBps speed. The speed on this computer is always constant. On the remote MacPro I get anywhere from 1.5MBps to 5MPps speed within a half hour of testing.
View 1 Replies View RelatedI'm using Data Rescue III on a USB powered hard drive with and it's taking a very long time with my iMac G5... It says 42,291 hours remaining (about 5 years) If I did it on my Mac Pro would it go faster, or is the recovery speed based on the hard drive speed?
View 4 Replies View Relatedi have a 1.5 Mbps AT&T DSL connection, and multiple speed tests show a download speed of 1.2 Mbps (and 200 Kbps upload). when i download files, such as software updates from Apple, various podcasts, and even Silverlight from Microshaft, the speed is always between 140 - 160 Kbps. i contacted AT&T, and the rep said it was because of buffering by the servers i was receiving the files from. is this a reasonable explanation? is this an accurate use of the term "buffering"?
View 3 Replies View RelatedLast night my fan kicked into high gear all of a sudden. I shut it down overnight and when booting up this AM I find it still running on high...quire noisy, of course. Is there something overheating? How to make it run at normal speed?
View 1 Replies View RelatedI generally get about 700kbs download speed, which is what my ISP (Sky uk) tells me I SHOULD have, but they also tell me that my router upload speed should be similar and it's not anywhere close to it.
View 19 Replies View RelatedDoes it hurt the computer... If the computer is doing something (watching flash, playing a game) that turns on the fan full speed;Does this hurt the computer? There are a few games I like to play and they turn on the fan at full speed (computer gets hot too, on the bottom.)
View 1 Replies View RelatedI've got a real odd problem with safari 4. For some reason it is cutting my download speeds in about 1/2 from my server and many other places.
If I restart safari I will be able to download close to my 18 Mbps for a little bit but then it will just start to slow down and after about 30 minutes it will be down to about 6 - 8 Mbps.
I've upgraded from Leopard to SL and had found that my C2D 2.4Ghz MBP 15" hasn't been snappy ever since. Even my friend's MBP 13" latest 2.4Ghz loads SysPrefs faster than me.
Would wiping the HD and restoring from TM using the Snow Leopard disk help at all, or would I get the same thing and have just wasted my time?
Burning at the slowest speeds possible has always been my goal - I simply get better compatibility when it comes to audio CDs. However, I do not know how to slow down the burn speed on my iMac. I am using Toast 10, and I can select 1x speed, but the CDs still burn at 8x. How can I change this?
View 5 Replies View RelatedI want to burn my audio CD-Rs at 1x speed for the best results. I've just bought the LGBE06LU10 burner (because the iMac 24s cannot burn any slower than 8x speed) and updated the firmware to YE05. However, I can't force it to burn any slower than 4x. Is there any way of doing this?
View 12 Replies View RelatedSo my MacMini has gotten real sluggish. Takes a while to load programs and the internet has gotten slower. Are there any programs that I should run to speed things up. Is there any thing I can do to get it back up to the speed when I got it. I still have lots of space left on the hard drive.
View 10 Replies View RelatedI have a Time Capsule as my main router with a 802.11n (b/g compatible) network, with an Airport Express (802.11g) extending it. I have AT&T Elite DSL ("up to 6 Mbps") and according to both 2wire.com and speedtest.net, I'm getting somewhere in the neighborhood of 5.1 Mbps. When I hook my DSL directly into my computer via ethernet, I get the same results. I ran a few "real world" tests and found that the results I got were pretty accurate. I downloaded a 4.8 MB file in about 7 seconds and a 17.8 MB file in about 30 seconds. So my question is...at what speed does wireless n come into play? I'm getting close to the highest speed AT&T offers on a network that is, for all intents and purposes, a g network.
View 1 Replies View RelatedI have an iMac 9, 1 (the '09 model). 3.06 GHz DC. So I tweaked the fan speed a little to see how cool it can get, but, there's one tiny problem. I used "smcfancontrol_2_1", I can get the speeds up, but not down.
View 2 Replies View RelatedI have a 2.8 GHz with 2 GB of memory. Everything is connected properly but it's been running really slow lately.
View 5 Replies View RelatedWhat do you guys think of this review I made?
[URL]
Leopard macbook
My computer is very slow
How can I speed it up, or tune up
How do i speed up my macbook pro
View 6 Replies View RelatedI have a 3-year-old-plus iMac8,1 with two GB RAM running OS 10.6.8. Hard drive is 320, with 172 gigs free. It used to be almost full, because i had a lot of video on it, but I transferred a lot to external hard drives. I emptied cache of safari, which improved performance, disabled time machine, disconnected two external hard drives, which has improved things some. I downloaded Tinker Tool, but not sure what to do with it. Sometimes I can hear the hard drive struggling in the background, doing something, not sure. I ran disk utility. Everything seems OK there. Still running slowly.
Info:imac, Mac OS X (10.6.8), iMovie11
Ok so I made an imovie that was like 20 minutes long and to do that I had to scan in like a billion pictures and all that. I deleted all the pictures of my computer when I was done with the project. But I have noticed that ever since I started this myy computer has become much slower. This imovie was the first big project I have done on my mac. I clean my disk drive thingy like ever 2 days using Disk Doctor.
Info:
MacBook Pro, Mac OS X (10.7.4)
I have a MacPro with Two 2.4GHz Quad-Core Intel Xeon "Westmere" processors. (The Mid 2010 model). Is there any point in getting a SSD with 6Gb/s speed? It looks like the bus on the MacPro can only handle 3Gb/s.
Info:
Mac Pro, Mac OS X (10.7.4)
I am sorry if i have posted this in the wrong topic, i'm not sure where this would go. I am trying to download a file off the internet, but my download speed is only 12 kb/s on average (Sometimes it will go up to 13 and sometimes down to 9). I have every application that could be using internet turned off and still no help. I have also set my utorrent to unlimited download speed but it still stays on 12! I have a good router so i don't think thats the problem. What am i doing wrong? Is there a program i can use to speed it up?
View 11 Replies View RelatedSo my 4 year old macbook has a logic board problem where it no longer detects the battery. The battery indicator just shows an "x". So basically it works fine but it has to be plugged in all the time. I've heard that if a Macbook does not have a battery in it and is just running off of AC power, it will cut the CPU speed in half in order to cut the power consumption. I want to see if this is true or not. I have ordered a new MBP but I was going to sell this computer for my friend for very cheap, but I need to make sure its not actually running at 1ghz, cause I'd feel bad about selling him something like that. The computer is perfect otherwise.
View 3 Replies View RelatedI currently have a early macbook 2008, 2.1GHz, 1GB ram. and im wondering if the base imac is A LOT quicker?
View 5 Replies View RelatedIf you put 1600 non-ecc ram in a Mac pro, will it utilize the faster speeds and possible lower timings or will it down clock to regular MacPro ram speed and timings?
View 8 Replies View Related