MacBook Pro :: Run A Hardware Test?
Mar 24, 2012How do you run a hardware test?
Info:iPhone 4S, iOS 5.1
How do you run a hardware test?
Info:iPhone 4S, iOS 5.1
I have a 17" unibody MBP (early 2009, specs below). It was running hotter than usual the other day, so I F2 booted into AHT to run a diagnostic. The status box within AHT showed 1 second into the 1st pass, and never got beyond that. Several seconds after that status message was displayed, the cursor froze. The time counter never advanced after that, and although I waited a long time, nothing happened. The test froze.Â
I've tried it several times more. It once worked, but every other time has frozen. Checking the "extended test" box, or trying to run in loop mode has made no difference - still freezes at "1 second".Â
I've had this machine for 3 years, OS's Leopard through Lion, and this has never happened before. I last ran a test, successfully, in January. I've not changed any components or suffered any damage since then. Memtest (ver 4.22) says my RAM is fine. (I ran this because the first portion of the AHT is the RAM component.) Aside from the aforementioned overheating episode, which disappeared, my machine's been fine.Â
early 2009 MBP unibody 17"
2.93 Core 2 Duo
8 GB RAM
750 GB HD
Info:
MacBook Pro, Mac OS X (10.7.3)
My son's 17" imac PPC G5 was not booting up. After a trying a couple of things I got it to boot using Disk Warrior and reparing the file directory. At that time I also ran DW's hardware test which said the drive was fine. My son hard restarted it shortly after I fixed it and it wouldn't start up again. Just a gray screen, no apple logo. When I tried to use DW again it told me there were problems with the hard drive and it couldn't fix the problem. I tried to fix the hard drive in target disk mode using Disk Utiltiy and Drive Genius. No luck. So I pulled a working drive out of my Mac Pro and reformatted it and swapped the internal drive of the iMac with it. There were no DIP switches to set. Started up the imac with a Leopard retail disk thinking I would just install a fresh system onto the replaced internal drive of the iMac. Disk Utility on the leopard disk didn't see the hard drive. Now I'm beginning to think it's a logic board problem but I can't find the original disks to do a Hardware test with. Is there some other way to test a logic board? Or some other idea that I'm not thinking of that could be wrong with the machine?
Info:
Mac Pro, Mac OS X (10.7.4), ATI 1900, 8GbRAM
if you recall a thread I started trying to get help on why the Mac Pro was crashing... I finally narrowed it down.After speaking to about 4 different people at apple.... they had me run the Apple Hardware Test off the boot CD.I took out EVERYTHING except the 2nd DVD burner (Apple Branded Superdrive from my old 2.5 Dual G5)... and ran the test.The Hardware Test ACTUALLY FROZE IN THE MIDDLE OF THE RAM TEST.I thought I had bad aftermarket ram... as it wasn't playing nice with the Apple ram when I added them together.Looks like I had fine aftermarket ram... the Apple ram was bad.I REPLACED the Apple Ram with the Aftermarket Ram... and the Hardware Test completed fine.So, now I'm going to be calling them again in the morning and letting them know what happened. I wonder if they'll just let me RMA the bad ram, or if I'm going to have to lug this dang thing down to an apple store.I WONT BE HAPPY IF I HAVE TO DO THAT.Oh, and no more lockups since switching out the ram... and all the other quirks (not able to burn CDs in Windows, sloooow Internet page draws, etc...) are all but gone now.
View 8 Replies View RelatedI am new to Mac and wanted to see if there was a way of testing the firewall in a Macbook.
View 2 Replies View RelatedI ordered a i7 15" Macbook Pro high resolution anti glare screen over a week ago. I've been reading lots of forums on the subject and have heard about the small print, yellow tint to the bottom half of the screen, the laptop not sleeping etc.
So I contacted the store to find out about the possibility of returning it if I'm not happy. They said I can spend all the time in the store with it but as soon as I leave the store there is a 15% restocking fee. It hasn't arrived yet but I'm expecting it any day now.
Can someone tell me all the tests I can perform in the store before I leave?
What is the best was to diagnose possible motherboard faults on a Mac? I'm having various problems which appear to be hardware related (i.e. re-formatting, re-loading OSX, etc don't seem to fix them and the problems appear at different times running different processes) so want to check the motherboard out.Typical problems are a USB hard drive suddening going off-line, the DVD burner suddenly resetting itself for no reason, screen not redrawing properly etc. and all these only happen occasionally. The only test I can find is a RAM test (various programs allow this including Tech Tool Pro 6) but is there a way to test other components?
Info:
MacBook Pro, Mac OS X (10.7.3)
Is there a way I can run a diagnostic test on my Macbook Pro and how do I check how much memory I have as well?
Info:
MacBook Pro (Retina, 13-inch, Early 2013), iOS 7.1
I rebooted and held down the D key and all I get is a grey screen.
View 1 Replies View RelatedI'm stuck between knowing if my MBP has a bag logic board, worn out plugs going Into it, or other reasons. It will not power on at all. About 5-10 minutes prior it was perfect. The battery had power, and when its not plugged up the green light is very bright. I figure since the I/O board is connected to the Logic and it shows power, that it may indicate its ok. But i dont know, since its not directly hooked to it. Apple / Geniuses and Other shops just give me quotes on changing out the logic board after observation of it not getting power...never have said anything relating to "After Testing the logic board...." So I am wondering, whats the secret? how is it done? CAN it be done at home? or, does anyone know what the shops/techs use to test boards?
View 2 Replies View Relatedis there a good program to test the new 4gb of ram i have just installed in my new macbook book is all working ok?
View 8 Replies View RelatedI just found a working macbook with a broken screen being sold for $60 on craigslist. I asked the seller for specs and she said she doesn't know the details except for the model # (which is A1181). It comes with no power adapter or software.Is there any way I can I test the computer to know if it is worth buying when I get there? I want to make sure it is able to run properly before investing in a screen. I have a 13" macbook. When I was at the apple store today, the employee was able to run diagnostics on my computer with his MBP without having to touch my computer. (Edit: There was a cord running between both computers, and my comp. was running, but everything was being done through his OS). Is there an easy way for me to do the same thing?
View 1 Replies View RelatedI purchased my Macbook Pro (Early 2011) 2ghz i7 edition, about 4 months ago now,
Earlier today my MacBook Pro ran a grey bar update during start up started up & ran a little slower until I restarted afterwards. I was concerened until the restart, however I am no longer concerned. My main issue is that now I can't seem to correctly follow the instructions to successfully start an apple hardware test. I have previously owned a Mac mini, Powermac G5 Dual 1.8ghz and Powermac Quad G5 and I have always been able to successfully run apple hardware tests on them.
I held down the "D" key during startup prior to the grey screen and I tried plugging in a ethernet cable, the powercable and a USB keyboard all to no avail.
Info:MacBookPro, Mac OS X (10.7.3)
I've been having issues with my 2011 MacBook Pro, I just keep getting a weird error popup but it always flashes up and goes away before I can read it. My Mac has also even running a bit slower lately and I know that I can do the Apple Hardware Test to check out that all the hardware is functioning properly. But will my Mac continue to run normally after I do the AHT? Like, will I be able to use it as I was before?
Info:
MacBook Pro, Mac OS X (10.7.4)
How do I get the Mac to run the hardware self tests. I saw the guy at the Genious Bar do it on my MacBook Pro. I replaced the parts that showed bad, I would like to run it again. I tried holding down the D on power up but didn't work.
View 1 Replies View RelatedFind an application to show me the strength of the incoming wifi signal in my Macpro.
Info:MacBookPro, Mac OS X (10.7.3)
I did the software update.After that my 1 and only USB port is not working anymore.Totaly dead. Cant do any hardware test, since they ask to use a dvd. Well no USB so no Disk Drive So no hardware test.
Also the online test is not working.Need to download a file. which is failing to.Â
Dont know what to do.Â
Info:
MacBook Air, Mac OS X (10.7.4)
I have a MacBook Pro (17-inch, Late 2011)Â using OSX 10.7.5
Trying to run Apple hardware test as my computer keeps crashing, or shutting down 30min in.  I restart while holding down "D" and nothing comes up. takes a while to startup, but then goes straight to desktop. What am I doing wrong? I'm ethernet connected to internet. When I bought the computer I installed an SSD HD. I remember when needing to install new software on the new drive it was a nuisance since the computer didn't actually ship with any software CDs. Had to do it over the internet somehow. The computer didn't have any problems before so never had to use AHT until now.Â
secondary question. I also reset SMC, by pressing left side shift+control+option+power key after shut down, but didn't get much response out of that either. no sound, or signal that what I did actually reset SMC. How would I know it reset or not?
Info:
MacBook Pro, Mac OS X (10.7.5), 16gb 1333 mhz ddr3
I've read that Early 2008 model MacBook Pros can boot into the Hardware test while pressing the D key on the keyboard without the disc in the drive (or was it the F2 key). I've also read that lots of people succeed doing it. Why does my MBP not do that?
View 8 Replies View RelatedMy wifes new macbook has had a few weird things happen, including 2 kernel panics right out of the box. She puts in the restore discs, reboots holding D and gets to the AHT screen. Selects the language then gets the that message, "apple hardware test does not support this machine"
View 6 Replies View RelatedI'm running one on my mid-2009 15" MacBook Pro with 4Gb RAM. It appears to be taking forever as it tests memory. It's been on Pass Number 2 for around 30 minutes now. The progress bar is either completely stalled or moving VERY slowly. Is this normal for the extended AHT? This is the first time I've run the extended test. I ran the quick test just prior to this one and it returned no errors.
View 2 Replies View RelatedI have a Macbook pro 2.4Ghz Intel Core 2 Duo witch i bought before 1 year before 3 days it started to doing this problem: i choose shut down and instead of that it restarts. I did the command option P R thing to reset but didnt work also does that when im going to safe mode. i also try to clean install my operating system but still nothing happens the problem is there i did also a hardware test and everything is ok verify disk : ok permissions ok: i dont know what else to do?
View 8 Replies View RelatedHow do I make a recording to test if my early 2008 MBP mic is working?
View 2 Replies View Related"Apple Hardware Test not support on this machine"
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.7.3)
Suddenly can not start up. Trying to run hardware test with reinstall drive in, but test does not complete. No error codes.
View 1 Replies View RelatedI keep trying to open up an online test for work, and my Mac keeps telling me that I need to update/intall Java. Which I have now done multiple times and it keeps giving me the same message.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
My MacBook Pro is acting strangely lately. When I close the lid, sometimes it doesn't go to sleep. Also, when I shut it down via the menu system, it will go to a blue screen and just hang there for 30-60 seconds before shutting off. Sometimes it just goes to that blue screen while doing random tasks.
Almost every time I'm hooked up via Thunderbolt->HDMI, when I unplug the cable (disconnect from TV), the computer goes to a blue screen.
I'm trying to run the Hardware Test, but right when that OS9 menu comes up, the computer shuts down instantly. I've tried holding F2 while booting as well as holding 'D' while booting (with USB OSX 10.6.7 Install DVD inserted). No dice with either one.
I'm running 10.6.8 with 16GB of SuperTalent RAM. I have a 120GB Intel 320 SSD in the optical bay and the stock 750GB  HDD in the stock position. Is my laptop now a dud that needs replacing?
Info:MacBook Pro (17-inch Early 2011), Mac OS X (10.6.8), 2.3 i7, 16GB RAM, 120 SSD, 750 HDD
I've read that Early 2008 model MacBook Pros can boot into the Hardware test while pressing the D key on the keyboard without the disc in the drive (or was it the F2 key). I've also read that lots of people succeed doing it. Why does my MBP not do that?
View 5 Replies View Relatedi rebooted and held down the D key and all I get is a grey screen.
View 24 Replies View RelatedJust curious whether p7550 cpu supports vt-x.
Can you run sysctl machdep.cpu.featuresfrom terminal to see whether vt is supported.