How do I get the Mac to run the hardware self tests. I saw the guy at the Genious Bar do it on my MacBook Pro. I replaced the parts that showed bad, I would like to run it again. I tried holding down the D on power up but didn't work.
View 1 RepliesI have a 2007 Santa Rose MBP and it has started to run very slow during the bootup and actual use of it. Here is how the bootup goes:
I turn it on and get the bong sound and a full white screen. In about 10 seconds I get the Apple log and in about another 10 seconds the circle that rotates as it boots up.
Then at about 2 minutes it changes color to a light blue color with the pointer on the screen. Then in about another 10 seconds changes to a darker shade of blue. At a total of 3 mins and 40 secs I then get the desktop with the space type background and in a couple more seconds the Mac OS X login screen. It takes around a minute until I am able to type anything. For awhile before that time I can type I get the beachball.
Here are the details of what I recently did:
I had a 250GB hard drive in my MBP running the newest version of Leopard. I was down to around 50GB free so I purchased a 640GB hard drive. I also was due to upgrade to Snow Leopard. I had an external USB enclosure that I could temporarily use. What I did is put the 640GB hard drive in that external enclosure and formatted it with the GUID partition table. I then used SuperDuper to mirror my internal hard drive to the external hard drive. I have a lot of programs installed and a lot data on my hard drive so didn't want to lose any of this.
Once the mirroring of my internal hard drive was completed to my external 640GB hard drive I then booted from that drive (using it externally and selecting option at bootup). Things seemed to run fine with no issues.
I then after booting up from this external hard drive did a Snow Leopard upgrade to this external hard drive. Once again this external hard drive appeared to run perfectly normal.
After things seemed to be okay I then opened up the MBP and swapped hard drives so the 640GB drive was my new internal HD. I then booted and once again I used it some and things appeared to work normally.
After this later in the evening I installed two programs, Final Cut Studio 3 and Logic Studio 9. As far as I can remember my computer was acting a little odd and after a reboot that is when all the above issues started.
As far as I can tell this never started until those two installs. Is it a chance I didn't try it out enough but I remember even with the HD being external USB my system appeared to run faster than ever. I even think the program didn't start with Final Cut Studio but started with Logic Studio 9
Any idea of what caused this? Even after my computer running it's VERY slow to the point of being almost unusable. For example if I open Word it takes 3 minutes or so to open. Almost any action causes the beachball to appear.
After looking at the Apple site I did both a PRAM erase (using Command Option P and N) and also a SMC reset by removing the battery and power cord and pressing the power button for over 5 seconds and neither fixed it.
I opened up Disk Utility and did a Verify Permission and got the following information:
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x.
Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired.
I've read that Early 2008 model MacBook Pros can boot into the Hardware test while pressing the D key on the keyboard without the disc in the drive (or was it the F2 key). I've also read that lots of people succeed doing it. Why does my MBP not do that?
View 8 Replies View RelatedI have a 2007 Santa Rose MBP and it has started to run very slow during the bootup and actual use of it. Here is how the bootup goes:
I turn it on and get the bong sound and a full white screen. In about 10 seconds I get the Apple log and in about another 10 seconds the circle that rotates as it boots up.
Then at about 2 minutes it changes color to a light blue color with the pointer on the screen. Then in about another 10 seconds changes to a darker shade of blue. At a total of 3 mins and 40 secs I then get the desktop with the space type background and in a couple more seconds the Mac OS X login screen. It takes around a minute until I am able to type anything. For awhile before that time I can type I get the beachball.
Here are the details of what I recently did:
I had a 250GB hard drive in my MBP running the newest version of Leopard. I was down to around 50GB free so I purchased a 640GB hard drive. I also was due to upgrade to Snow Leopard. I had an external USB enclosure that I could temporarily use. What I did is put the 640GB hard drive in that external enclosure and formatted it with the GUID partition table. I then used SuperDuper to mirror my internal hard drive to the external hard drive. I have a lot of programs installed and a lot data on my hard drive so didn't want to lose any of this.
Once the mirroring of my internal hard drive was completed to my external 640GB hard drive I then booted from that drive (using it externally and selecting option at bootup). Things seemed to run fine with no issues.
I then after booting up from this external hard drive did a Snow Leopard upgrade to this external hard drive. Once again this external hard drive appeared to run perfectly normal.
After things seemed to be okay I then opened up the MBP and swapped hard drives so the 640GB drive was my new internal HD. I then booted and once again I used it some and things appeared to work normally.
After this later in the evening I installed two programs, Final Cut Studio 3 and Logic Studio 9. As far as I can remember my computer was acting a little odd and after a reboot that is when all the above issues started.
As far as I can tell this never started until those two installs. Is it a chance I didn't try it out enough but I remember even with the HD being external USB my system appeared to run faster than ever. I even think the program didn't start with Final Cut Studio but started with Logic Studio 9
Any idea of what caused this? Even after my computer running it's VERY slow to the point of being almost unusable. For example if I open Word it takes 3 minutes or so to open. Almost any action causes the beachball to appear.
After looking at the Apple site I did both a PRAM erase (using Command Option P and N) and also a SMC reset by removing the battery and power cord and pressing the power button for over 5 seconds and neither fixed it.
I opened up Disk Utility and did a Verify Permission and got the following information:
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x.
Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired.
I have a 2007 Santa Rose MBP and it has started to run very slow during the bootup and actual use of it. Here is how the bootup goes:
I turn it on and get the bong sound and a full white screen. In about 10 seconds I get the Apple log and in about another 10 seconds the circle that rotates as it boots up.
Then at about 2 minutes it changes color to a light blue color with the pointer on the screen. Then in about another 10 seconds changes to a darker shade of blue. At a total of 3 mins and 40 secs I then get the desktop with the space type background and in a couple more seconds the Mac OS X login screen. It takes around a minute until I am able to type anything. For awhile before that time I can type I get the beachball.
Here are the details of what I recently did:
I had a 250GB hard drive in my MBP running the newest version of Leopard. I was down to around 50GB free so I purchased a 640GB hard drive. I also was due to upgrade to Snow Leopard. I had an external USB enclosure that I could temporarily use. What I did is put the 640GB hard drive in that external enclosure and formatted it with the GUID partition table. I then used SuperDuper to mirror my internal hard drive to the external hard drive. I have a lot of programs installed and a lot data on my hard drive so didn't want to lose any of this.
Once the mirroring of my internal hard drive was completed to my external 640GB hard drive I then booted from that drive (using it externally and selecting option at bootup). Things seemed to run fine with no issues.
I then after booting up from this external hard drive did a Snow Leopard upgrade to this external hard drive. Once again this external hard drive appeared to run perfectly normal.
After things seemed to be okay I then opened up the MBP and swapped hard drives so the 640GB drive was my new internal HD. I then booted and once again I used it some and things appeared to work normally.
After this later in the evening I installed two programs, Final Cut Studio 3 and Logic Studio 9. As far as I can remember my computer was acting a little odd and after a reboot that is when all the above issues started.
As far as I can tell this never started until those two installs. Is it a chance I didn't try it out enough but I remember even with the HD being external USB my system appeared to run faster than ever. I even think the program didn't start with Final Cut Studio but started with Logic Studio 9
Any idea of what caused this? Even after my computer running it's VERY slow to the point of being almost unusable. For example if I open Word it takes 3 minutes or so to open. Almost any action causes the beachball to appear.
After looking at the Apple site I did both a PRAM erase (using Command Option P and N) and also a SMC reset by removing the battery and power cord and pressing the power button for over 5 seconds and neither fixed it.
I opened up Disk Utility and did a Verify Permission and got the following information:
Permissions differ on "usr/share/derby", should be drwxr-xr-x, they are lrwxr-xr-x.
Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired.
Since it said it didn't repair it I did a Repair Disk Permissions but that didn't seem to fix it.
why I get this error when running the hardware diagnostic test?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have a busted DVD drive, and I need to run the AHT utility. I heard it was in the /system/Library/CoreServices/ folder. It's not for me. And so, pressing "d" or "f2" on a reboot doesn't work. Anything I can do to run AHT without getting my DVD drive repaired first?
View 1 Replies View RelatedI have a 17" unibody MBP (early 2009, specs below). It was running hotter than usual the other day, so I F2 booted into AHT to run a diagnostic. The status box within AHT showed 1 second into the 1st pass, and never got beyond that. Several seconds after that status message was displayed, the cursor froze. The time counter never advanced after that, and although I waited a long time, nothing happened. The test froze.
I've tried it several times more. It once worked, but every other time has frozen. Checking the "extended test" box, or trying to run in loop mode has made no difference - still freezes at "1 second".
I've had this machine for 3 years, OS's Leopard through Lion, and this has never happened before. I last ran a test, successfully, in January. I've not changed any components or suffered any damage since then. Memtest (ver 4.22) says my RAM is fine. (I ran this because the first portion of the AHT is the RAM component.) Aside from the aforementioned overheating episode, which disappeared, my machine's been fine.
early 2009 MBP unibody 17"
2.93 Core 2 Duo
8 GB RAM
750 GB HD
Info:
MacBook Pro, Mac OS X (10.7.3)
My son's 17" imac PPC G5 was not booting up. After a trying a couple of things I got it to boot using Disk Warrior and reparing the file directory. At that time I also ran DW's hardware test which said the drive was fine. My son hard restarted it shortly after I fixed it and it wouldn't start up again. Just a gray screen, no apple logo. When I tried to use DW again it told me there were problems with the hard drive and it couldn't fix the problem. I tried to fix the hard drive in target disk mode using Disk Utiltiy and Drive Genius. No luck. So I pulled a working drive out of my Mac Pro and reformatted it and swapped the internal drive of the iMac with it. There were no DIP switches to set. Started up the imac with a Leopard retail disk thinking I would just install a fresh system onto the replaced internal drive of the iMac. Disk Utility on the leopard disk didn't see the hard drive. Now I'm beginning to think it's a logic board problem but I can't find the original disks to do a Hardware test with. Is there some other way to test a logic board? Or some other idea that I'm not thinking of that could be wrong with the machine?
Info:
Mac Pro, Mac OS X (10.7.4), ATI 1900, 8GbRAM
if you recall a thread I started trying to get help on why the Mac Pro was crashing... I finally narrowed it down.After speaking to about 4 different people at apple.... they had me run the Apple Hardware Test off the boot CD.I took out EVERYTHING except the 2nd DVD burner (Apple Branded Superdrive from my old 2.5 Dual G5)... and ran the test.The Hardware Test ACTUALLY FROZE IN THE MIDDLE OF THE RAM TEST.I thought I had bad aftermarket ram... as it wasn't playing nice with the Apple ram when I added them together.Looks like I had fine aftermarket ram... the Apple ram was bad.I REPLACED the Apple Ram with the Aftermarket Ram... and the Hardware Test completed fine.So, now I'm going to be calling them again in the morning and letting them know what happened. I wonder if they'll just let me RMA the bad ram, or if I'm going to have to lug this dang thing down to an apple store.I WONT BE HAPPY IF I HAVE TO DO THAT.Oh, and no more lockups since switching out the ram... and all the other quirks (not able to burn CDs in Windows, sloooow Internet page draws, etc...) are all but gone now.
View 8 Replies View RelatedI have noticed that my white macbook bootup time is taking about a minute to boot. My Macbook now has 4gb or ram. I did run the memtest to check that the memory I installed is ok. It passed. Now I am bootup up with an external monitor plugged in. I am not sure if that is causing an issue. Is there an app I can get to test to make sure my mac is ok?
View 1 Replies View RelatedI'm trying to determine, even after a visit to the Apple store and clean install, if my boot up time is sub-optimal. It's still taking over a minute to bootup to the desktop (from the start up sound). What's ya'lls times for booting up?
View 24 Replies View RelatedEvery once in a while, my mid-2010 15" i5 MBP sits at the greyish Apple logo screen, after the "bong," with the wheel spinning forever. If I shut down and reboot, I'm at a log-on screen in about 15 seconds (which is my typical boot time, as I have an SSD). This is my first Mac after a long time on PCs, so I've got no idea where to start. All the posts I've found by searching pertain to earlier model machines using HDDs where the user can't get a boot at all; I'm only seeing this weirdness periodically.
View 1 Replies View RelatedGrey screen, wont bootup, no way
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.4)
Last night I installed Leopard's Graphic Update. I can't boot my macbook since then. Stuck at the gray screen with apple logo. Here's what I already tried to do: Boot with leopard DVD and run Repair Disk - it tells me the disk appears to be ok. If I click on repair permissions tough, it takes a long time and then hangs. Nothing happens, the progress bar even stops spinning.
I then tried to boot with Disk Warrior 4.0 (it's the version I have). I tried reparing disk and files permissions there, and it worked ok. But I can't boot after it as well. Again in Disk Warrior, I tried clicking REBUILD to get my file directory back and retrieve my files, but after some seconds it states there is not enough memory. I hope this is RAM memory, because I just ordered a pair of ram chips, Im gonna upgrade it to 2gb (I only have 512mb ram, first gen intel macbook core duo)
So tried SAFE MODE (shift), nothing. Single user mode, typing fcsk -y , reports the disk is ok, but nothing as well. I have a time machine backup from 11 days ago (apple makes it so easy to backup and I cant even bother plugging in my lacie firewire external hd, retarded me), and for me that's kind of unnaceptable. I go to university and thats 2 weeks worth of priceless annotations, I really need to get them back.
So my computer froze while I was waking it up from it's nap, so I restarted it by holding down the power button. It now shows me the gray screen, apple sign and spinning circle for about a minute before it's decided it's done and would like to turn itself off. I have tried resetting the PRAM and the SMC. I have tried restarting in safe mode. I tried to restart it off the AC adapter without the battery. I hear the chime, I see the apple, and the status circle, and then nothing!
View 4 Replies View RelatedIve had my macbook for about 2 months and its seemed to working just fine. However today while listening to music it decided to lock up and freeze for a good minute before it would unlock and continue playing the music through itunes. It did this a few times so I finally decided to restart the computer. The first time I booted it it froze on the apple logo and the loading circle. I killed it and rebooted, it takes about four to five minutes to get to the desktop picture, and another five to pull up the main menu bar. I am going to let it sit over night and see if it gives me any error messages, however; I still haven't seen the dock at all, and ive let it start for about twenty minutes now. It will usually show the top menu bar and then the mouse will give me the sbod while it slowly loads up the top menu bar, and usually the clock is a good few minutes behind.
I have tried a pram zap, draining the power off the board, checking the sata connection, unplugging the power, and I ran a hardware check at start up and it said everything was ok. I am currently typing on my tank of a toshiba laptop that still works after being dropped multiple times and has been heavily used for a good 3 years. The mac has been completely useless is most work situations. Its a refurbished 2.53ghz 4gb ram 9600m 512mb 15" mbp. I am thinking of reformatting it and hoping it works, and then selling it and using the money for a new toshiba or a custom built desktop, because I just cant deal with the amount of money and time I have lost trying to deal with this thing while I could have been getting work done.
I've had my 13inch MBP for almost 3 months now. I love it. However within the past month and a half the hard drive on when I press the button for the laptop to turn on makes a horrible sound. A mechanical sound of the hard drive..turning on or starting up or something. It's like, kinda embarrassing to turn it on in public cause it sounds like a disabled electronic robot baby yelling for help. When I first got my MBP when it turned on it did not make a noise at all. at all. but now all of a sudden it does? And let me tell you, when I had my original white macbook from 2006-early 2009 it began making the same noise in like mid-07. Therefore I know I'm not the only one to have ever heard this noise before.
View 11 Replies View RelatedTook my Powerbook to the Apple store because, if can you believe this, it shut me out with a mysterious log-in request, which I had not engaged, plus the thing had begun slowing down... I asked if they could override the mysterious password issue and do a backup/erase/reinstall. They told me they could not and my hard drive was failing so I bought a new drive, installed it and am now experiencing a "freezing" issue everytime I try to boot-up from my OS X installation disc. Actually, the "freezing" was occurring with the old hard drive as well, but only during a reboot through the disc.
View 2 Replies View RelatedInstalled a Samsung SSD 830 256GB into my MBP 15" after duplicating the hard drive via disk utility. But bootup times has nearly doubled from 35 seconds of the old HDD to 63 seconds with the new SSD when it's supposed to be the other way round! Applications do startup and run very fast though. Tried repairing my permissions but that hasnt helped.
Info:
MacBook Pro, Mac OS X (10.6.8), 2.2GHz i7 intel, 4GB RAM, 500GB HDD
will not boot up to log in screen when powered up, all I get is a grey screen with apple logo in middle and spinning timer
I have tried resetting SMC
I have tried starting up in Safe Mode (it won't do that either)
I have gotten into disk utility to repair disk
I have tried resetting PRAM
nothing... we are on a network in a school district so my next step is to re-image it but wondering if there is something else I should try first
if not then how do I backup files that are needed before I re-image
Info:
MacBook Air, OS X Mountain Lion (10.8.5)
recently attached an external hard drive with data from an early 2008 Macbook to my early 2009 Macbook running Maverick 10.9.Now my computer will only boot up once in every 10 tries and I can't access any files or my finder.I do get a message saying my start up disc is full and I must delete some files. How can I do this if I mostly just get a grey screen and when it does boot up I can't get my finder to come up
View 2 Replies View RelatedCan someone tell me how to set up a password at bootup that doesn't have to be entered from sleep?
View 1 Replies View RelatedI have a 80GB Intel X25-M G2 that cannot boot in less than 30s.
I keep reading that people get bootup times as low as 15s, and I was wondering if there is something I am doing wrong.
I am using about 30 GB of SSD space, and I use a 500 GB 7200 RPM Seagate Momentus XT hybrid as a scratch disk (downloads, documents, pictures, etc.) in the optibay.
I just did a clean install of snow leopard yesterday, formatted my X25 (wrote zeros, mac [journaled]), installed SL, updated, etc. The bootup time went up to over one minute.
I reinstalled snow leopard again (did not format this time) and it went down to 33s. I then reset the pram and it went down to 27s.
Now, it's back around 30s.
The one I'm currently using had a problem and needed to have the hard drive replaced, which was done by a local Apple store. They were also very kind to reload Lion once the drive was replaced. I reconnected the machine to our domain here at work yesterday and have been experencing very long bootup's. During the boot process I'm receiving a flashing grey Globe of the Earth, prior to seeing the Apple logo. Once I see the Apple logo things seem to proceed normally and the machine completes the boot process. Does anyone know what this grey Globe of the Earth means? and what I may need to do to satisfy whatever is causing it.
Info:
MacBook Pro, Mac OS X (10.7)
I have a macbook pro retina display mid 2012 model. When i boot up i hear a chime but screen is black. I wait a few min to allow it to finish booting up with a black screen. I close the mac book for a few minutes to let it fall asleep. When i open it , screen works and im on login screen.
Info:
MacBook Pro with Retina display, iOS 8.1.1
I switched out my HDD for an SSD and switched out my superdrive for the HDD. It was working fine for the past 6 months or so.
So, yesterday I plugged in my Macbook and started it up from hibernation. I then proceeded to launch chrome and as it tried to restore my last session (with like 5 or 6 YouTube tabs), it crashed. I tried closing it and re-opening it, but no cigar. I then thought to just open safari, but a no network detected warning came up. When trying to resolve that, an "unapproved caller" error came up.
I then tried to restore my computer from a TM backup, but was unable to due to it being unable to unmount the drive, then I tried just erasing the drive, nope.
I then decided to take the dang SSD out of the internal SATA connector and plugged it in through an external enclosure, that worked and I was able to restore my TM backup that way.
So bottom line, I can boot up from USB fine, but when I plug it into the internal SATA connector my MBP gets stuck at the apple logo. I've tried booting into safe mode, resetting the NVRAM and PVRAM. No luck. From what I've seen, it seems that I may have a bad SATA connector that needs to be replaced?
Whenever I start up my macbook it stayed on grey background with an apple logo and spinning thing. I press and hold the shift key once and it went to safe mode and did my diagnostic and found out that some file got corrupted so I thought maybe I'll just do another start up and everything will go back to normal. Then I restart it again but this time it wont past that grey back ground w/ apple logo w/ spinning thing again. I tried to do the safe mode again and it won't let me anymore. I went to apple site and i found a bunch of keyboard shortcuts, non of those help me. Any here have any idea what might happen to my MacBook. I'm in Kazahstan for work related trip and they don't use Mac here so there is no where I can buy another snowleaopard cd.
View 1 Replies View RelatedSo about a week ago I attempted to Dual Boot Ubuntu on my Boot camp partition. Due to a compatibility issue, even though I installed it easily, it was very slow, so I proceeded to erase all data on all the partitions the installation created, ending up with The OS X partition + 4 other ones. (there was an EFI part. too).
Now here's the problem. Right after I uninstalled Ubuntu, when I booted up my MBP, it took a VERY long time to The Logo to appear, almost seems like it was searching for something, ... . The same thing happens after I uninstall rEFIt, and after merging some of the partitions, ending up, right now, with 3 partitions. What a mess!
Boot time, unless I press the option key and select Macintosh HD, is about one minute 15 sec. because of the insanely long time to the logo to appear.
What the heck do I do? I would prefer not re-formatting my disk, I've gone through so much downloading and installed a whole bunch of things I need... And I don't have an external Drive.
Starting this morning, when I boot up my MBP, it seems fine through boot up, but when it reaches my desktop, the taskbar, dock and desktop icons never show up and instead I have horizontal lines across the screen. I tried booting up from my external hard drive, but I have the same issue. I can see the mouse and move it around and the desktop wallpaper shows up sometimes, but nothing else shows up. When I boot up in safe mode however, everything looks fine. I have not upgraded anything anything recently, either hardware or software.
Info:
Macbook Pro (Original), Mac OS X (10.6.4), AEBS, Apple TV
