MacBook Pro :: Optical Drive Noise - Takes Time To Quite Down
Jul 31, 2009
When I go to 'About this mac' > 'more info' and click on the SATA option, the optical drive makes a lot of noise (seemingly checking it's there every time). I also use an iMac at work and this doesn't happen - is it normal for the MBP to do this every time? It also does it at startup, plus takes 2 minutes minimum to quieten down after inserting a disc or asking the disc to do anything.
Can a few folks comment on how long it takes for your screen to light up and to hear the optical drive make noise from the time you push the "On" button? I've seen a few videos and some comments here as well that it is nearly instantaneous and then the MBP goes into its boot cycle. I have an X25 SSD which boots me into my desktop in about 19 seconds from the button push BUT there is about a 5-6 second delay from the time I push the "On" button to any activity. Any ideas how to fix this (if it is, indeed, a problem)? Again, some other folks report instant activity.
My macbook (2.0 13" unibody) got dropped from a height of only about 10 inches. it fell on side with the optical drive(closed) there was nothing in it, but when I opened it up and woke it it made a bunch of noise like it was trying to read a disk. It now does this every time I wake it up. When I put a disk in it winds up and appears to work normally, but if I move the laptop it makes a buzzing noise, like the dvd is spinning fast and touching something inside when I move it around. Did something come loose? any ideas as to wha tthe issue is, how to diagnose it, or fix it? Also, I recently bought this macbook, and the screen says macbook pro at the bottom. However, I know they never made a 2.0 macbook pro. does it seem like maybe the screen just got replaced at some point? is it a direct replacement with the pro's? every thing seems to fit fine, but there is a small scratch/dent in one corner indicating a drop (which maybe cracked the screen?)
I own a new MBP (October 2008 model) and just two days ago my optical drive has started making weird noises whenever I bring my computer out of sleep. It makes a noise like it is ejecting a disk three times, about once a second for 3 seconds. This is really annoying, especially when I use my computer to take notes during lecture because everyone looks to see who is the douche bag with the noisy computer disrupting class. Any suggestions?
So today I managed to drop my MacBook a short distance to the ground. I can't believe I did this. The computer was asleep at the time and, as far as I can tell, the internal HDD is perfectly fine. After I dropped the computer it wouldn't at first wake up from sleep. After removing the battery and replacing it, it booted back from the state saved to the HDD. My problem is that my optical drive makes noises now. I never use it, but whenever the machine tries to access it (waking from sleep, launching Disk Utility, etc) it makes noises as if the eject mechanism is running constantly or something else like that. The case also slightly bulges where the drive is. Now, if it doesn't work ever again I will only be slightly sad. I haven't tried to put a disc in it yet, but because of a previous spill by a previous answer the fibers around the opening are so stiff that getting a disc out of the drive when it works is a pain. Any ideas of what might be wrong and how to possibly fix it? I haven't tried resetting the drive, I don't have the time tonight.
I have a thumb drive that if i plug it into my MacBook Air in the left usb port, it takes at least 3 minutes before it shows up on my desktop, sometimes MUCH longer. If i plug it into the right USB port, it shows up after a minute. If I plug this same thumb drive into a PC, it shows up within seconds. If i plug a different thumb drive into either USB port on the Air, it shows up within seconds.Â
It's a FAT32 thumb drive, and i've already tried reformatting it and the same stuff happens. I've even had disk utility check it out and nothing's wrong. I'd guess the thumb drive is bad but it works instantly if i plug it into a PC, so guessing that's not it. It's a 10.6 MacBook Air.
I just got my macbook pro yesterday and ran it all yesterday not hearing anything. Today when I woke it from sleep I could clearly hear the fan or hard drive going. I was in a quiet room and it's quite annoying.
istat says its at 2000 rpm so thats when I started thinking it may be the hard disk. It does pulse every now and then but thats even while it's just sitting idle.
I guess I could live with it but its just annoying. Anyone else having this?
I have an i7 MBP with the latest updates for Leopard with VMWare and Windows 7 Home. When the MBP is started on the LAN by WiFi it is able to connect to the Internet immediately. However, when I try to connect or see the MBP from another Windows 7 Home computer on the same LAN, it takes approximately 6 to 7 minutes before it shows up in "Network" on the other computer. No "Refresh" will locate it before the time. When I start VMWare and Windows 7 loads, it shows up immediately in "Network".
Am i the only one experiencing a delay ex. when listening to music i plug in my earphones and it takes like 5=8 seconds for my macbook air to change from the speakers to earphones. Why?
Does any of your macbook airs take super long to recharge? Mine was at 33% and it took almost 6hrs. I already tried to re-calibrate the battery and did the PMU reset thingy
I recently had to have my Macbook Unibody screen replaced. After they replaced the screen, they forgot to install the airport card. They had to take the computer back and replace the airport card. Now every time I turn on the airport card it literally takes like a minute to find any networks. That doesn't seem like a long time but next time you open your macbook see how long it takes to find networks. What should I do? Also when ever I click on the airport logo it says it is constantly scanning. Even when i am connected to a network.
I have a MBP, the model before the new unibody anyways the last few days the tool bar above that has the wifi battery status and so forth takes a long time to load while booting what gives ? Anyways this just started a few days ago, do not know if I had installed something to slow it down.
I'm not sure when it started, though it was definitely after I updated to Lion, pasting into Textedit started taking longer and longer!
It doesn't seem to matter how much I'm pasting; I tested it by pasting one word, and pasting a paragraph, and they both took long enough that the spinning wheel came up for several seconds.Â
It takes really longer time to boot up. Eventually it gets boot, but i am unable to access Mail app. Sometimes the booting is faster. In this case, i can use the Mail app. I tried to shut down, restart many times, but the boot up takes longer time or even lesser.
My MacBook Air (13-inch, mid-2013) takes a long time to connect to any wi-fi network (~ 30 seconds), including known/previously connected ones. Upon wake from sleep, the network will have disconnected and will have to reconnect, again taking about 30 seconds. Also, I notice that even when the display turns off briefly, the network will still disconnect. It does not matter which network it is. However, Power Nap notifications will still show up and be up to date upon wake, suggesting that the disconnection is happening only when I wake the computer.Â
Things I have tried:
- removing all networks
- toggling wake for wi-fi network access and put hard disks to sleep when possible
- setting Location
- deleting all network system preference files and restarting
- resetting SMC
- restoring OS X Mavericks (10.9.3, clean install) with no recovery of network settingsÂ
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
Last night I had a weird experience with my mid-2011 MacBook Pro; I went out to dinner and came back to find the cat had kicked the power cord out, draining the battery. I've had this happen before and wasn't too worried; it's always just restarted after I plugged it back in. This time, however, I plugged it in (getting, perplexingly, a green light on the cord) and nothing happened except for the sleep light slowly flashing; it didn't respond to any pressing on the power button, and the sleep light disappeared if I unplugged the cord. The battery test button on the side got one flashing light (meaning, I believe, a dead battery), which also didn't work if the computer was unplugged.
I left it plugged in while I hunted for info on the problem and about an hour later had just decided that I was going to have to take it in to the Genius Bar when it suddenly booted up. The cord light turned orange and it proceeded to fully recharge over the next two hours. Is this normal behavior after a battery drain? Should I be concerned? Is it worth taking the computer in to get the battery checked, or some other element of the comp? (some of the things I looked at were talking about the logic board, which is not a happy thought) iStat Pro claims the battery is at 41% health, 111 cycles, which I would think would mean it has some life in it yet.
My new macbook pro of late 2011 was working perfectly! But i know i shouldnt complain but iv only had it for 5months! Nyways, all of a sudden instead of an instant shut down which it was doing it now takes 5-10 seconds to shut down! And my preference is to shut it down! I dnt like just letting it sleep constantly!?!
I purchased my Macbook Pro (late 2013) Retina last month and it was fine to send and receive messages through imessage.I will see a notification for the message, but when actually going into the imessage, the message is shown after maybe 5 minutes.
So I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
why my MS Office takes longer time to start up after I have upgreaded my MacBook Air to OS Lion ? Why my MacBook Air takes much longer time to shut down after upgraded to OS Lion ? Â