Once in a while when I use my 15' MBP 2010 (GeForce 330M) on my bootcamp I experince screen blinking which then my system would say: "Nividia Driver Stopped". Have you guys been experincing this? Is there a way to stop it?
View 3 RepliesI installed bootbcamp today and windows 7 and after a period of time the following message would pop up after the screen froze and various artifacts would appear or the screen would be divided in half horizontally with artifacts in the middle.
"Display driver stopped responding and has successfully recovered"
I don't think this is a bootcamp driver issue. This is an issue between ATI and Microsoft and has been going on at least since 2007. Not much to say about it at this point, but I was wondering if anyone else has experienced this issue with the new iMac's and windows?
I'm considering buying an older macbook with a 2.4 processor or a new 2.0 but am not sure what the real differences are with the video card performance...
will the newer nividia based card help with the small video/dvd projects i like to do or is this card mostly for better gaming/etc?
The setup: MacPro 2.8GHz (Early 2008 model with 8 cores, 10 GB RAM, nVidia GeForce 8800GT, four internal hard drives of a total of 5.25 TB).
The symptoms: On Friday night I was booted into Windows Vista (64-bit) via Bootcamp as I had to do a bit of gaming not possible under OS X. Specifically I played All Points Bulletin (brand new MMO only for Windows). I found it to be an interesting idea to open another game at the same time (Warhammer Online). So I had both games running at once. After a couple of hours I received an error message ("Display driver has stopped responding and successfully recovered"). I had seen this message on a few occasions under Windows some months ago too. This time however the error message went away only to give me a slightly garbled image on screen. Psychedelic colours, quite funny looking in fact. I restarted Windows, and all looked normal again.
Then I opened browsers, word documents and so on, all normal. But as soon as I opened a game, the display was full of distortion and funny looking colours, dots and stripes, patterns vertically and horizontally. I also received the dreaded blue screen (which I had never had in Windows on my Mac since I installed it two years ago). I booted into OS X. All looked normal. Then I opened a game. Same symptoms as in Windows. I restarted. Opened only a simple YouTube video. Even then the display was making everything on screen impossible to see (and read). I did all the normal procedures (resetting PRAM, checking on logs for hints at what could be wrong and so on). I also ran the Apple hardware test, the extended version, which lasted two hours. It found nothing wrong.
I checked all connections and cables, I double checked the interiors of the Mac, no dust, all looked normal. I restarted the Mac into OS X once again, and this time I could only see the Apple logo during booting. After that it was mostly a black screen with some strange colour patterns. I'm writing this from another computer away from home as the Mac is all I have there at the moment, and I do not have access to any of its contents from here now (no logs to show you, no photos or videos). To me this looks definitely like the 8800GT has died completely, and I will bring it into an Apple retailer tomorrow for some testing, but I thought I'd just mention this here in case you guys should have any ideas. I would like to point out that I run iStat on my Mac and that I regularly check on the components temperatures and fan speeds.
Everything always look normal there (low temps in general, and fan speeds are mostly at their idle default settings, spinning up a little bit when doing graphically intensive tasks for example when video editing or playing a game). I did notice on Friday night that the power supply fan under OS X remained at its low idle setting all the time even when I tried to speed it up by using SMC Fan Control. The program managed to speed up all the other fans, but not the PSU fan. I do not know if that is any indication of something else going on. Sadly SMC Fan Control cannot control the GPU card's fan under OS X, but under Windows I do regularly control the GPU fan and temperature, and the card there has always been running between 60 and 84 degrees C.
My MBP just stopped allowing me to make accents and tildas via Command+Shift+e or Command+Shift+n
View 2 Replies View RelatedWhich is your preference and why.
I prefer Nvidia. and I noticed a really high end nvidia on the mac website. for like 2k .. why would anyone want that
ok so i have had my imac for over a year now, and the graphic card ram burned out a few weeks ago. i figured it was just because i was working it too hard. usually im running a second monitor, and almost constantly playing a video game on one with hulu running on the other. so i thought no big deal i have apple warranty for the next 3 years, so i took it into the store (which is almost 150miles from where i live). well a week later i went and picked it back up after they had "fixed" my problem by replacing the whole card.
but it hasn't been more then three weeks and im experiencing the same problem. i stopped using my second monitor when i got it back, so i have no clue why its doing this.
My backlit keyboard just randomly stops working. I can restart the computer and sometimes it starts working, but sometimes it doesn't. Any idea what is affecting this?
Mid 2009 Macbook Pro
I have created a simple Automator action which says 'when files are added to folder Dropbox>Camera Uploads, import them to iPhoto'.The problem is that as the files are added to Dropbox one at a time (by the Dropbox servers, after they are taken on my Android phone and the Dropbox app auto-uploads them), this means there is a gap of 30-60 secs between photos, and more for a video. The end result therefore is iPhoto has each photo imported as a separate 'Event', rather than all the photos imported as one event.
What I'd like to say is 'wait for 5 minutes after the most recent photo/video was added, before importing all the photos/videos just added in that batch'. That way instead of iPhoto receiving each file one at a time and importing them separately, Automater will wait until the folder falls silent, indicating the import from the phone has finished, and only then will it import all the photos taken as one event.
Info:
Macbook Pro, 2.8GHz, 4GB RAM, 450GB HD
Anyone running windows 98 second edition on your Mac Pro. I installed Fusion 3 and found in my old CD box, a copy of windows 98 SE and a bunch of old games like Duke nukem 3d etc..
Anyone able to get the sound driver to work. And where do you download the sound drives? VMware tools does not seem to include it.
I'm on the latest MBP and when I'm in bootcamp on Ventrillo, I sound like darth vader when I talk. I think the problem lays in the internal microphone (and the driver that doesn't seem to work)? So if I get an external one and plug it in, I'd rather not want to go buy an external mic and just have it not work still.
View 2 Replies View Relatedmuch research and trying everything I could, I've given up. I know I'm not the only one, and want to bring awareness out there.Clear will tell you that their driver for the usb dongle will in fact work with 10.6, however, I haven't been able to get it to work with 10.6.1 or 10.6.2. Why didn't I try with 10.6? Because 10.6.1 was already out when they finally upgraded their drivers to support Snow Leopard. Sigh.At any rate, I've had four different Clear technical support supervisors swear to me their driver works with Snow Leopard, and 10.6.1 and 10.6.2, however it doesn't. I'm trying to get the word out so no one here is fooled into buying something that just doesn't work.
View 2 Replies View RelatedI have a Macbook Pro 15" , C2D 2.33ghz. I have the 7100 version of Windows 7 and everything worked perfectly except for the sound.
No matter which bootcamp driver I try or even Realtek's own vista one nothing works.
I downloaded the bootcamp 2.1 drivers and everything installed correctly , including the realtek ones. All the hardware looks fine in device manager but I dont hear anything out.
Should the default be speakers? It seems that it keeps the driver as microsofts own and it doesnt say anything about realtek. Could that be the problem?
I did not try the microphone jack yet but will in a few minutes.
Even if there is a hack , Im willing to try it. What is the exact audio chipset on this model of macbook pro?
The camera of my Mac Book Air doesn't work anymore. I can't find a way to activate it again or to check whether it's ok or not.
Info:
MacBook Air, Mac OS X (10.6.8)
I connected a external monitor onto my macbook pro and I want to know how do I make that monitor my main one? like move everything (dock, folders, and bar on top) to my external monitor?
View 3 Replies View RelatedI have my first ever Mac in the form of a 13" MBP! I am trying to rip some DVDs using handbrake. However, when Handbrake has finished scanning the source DVD (commercial DVDs), it only shows 1 title in the drop down title box. I have tried restarting, taking the DVD out and popping it back in again, but with no luck. Has anyone got any ideas what I'm doing wrong? How do I get all titles to show in the drop down title selection box?
View 4 Replies View RelatedSo, I just opened up Acquisition and it seems to just get stuck on "Connecting..."
Is anyone else having this problem? Anyone know of a fix? It worked up until maybe a week ago.
I'm working with a Mac Pro (2x3 GHz Dual-Core Intel Xeon, 4 GB RAM) and a dual 23" monitor setup. Quite recently the second monitor stopped responding, after disconnecting everything, moving, and reconnecting. (Everything was boxed lovingly in its original packaging and moved by gentle movers.)
It isn't the monitors � both work fine in the first monitor port. The computer recognizes there is a second monitor attached, allowing me to access Arrangement options under System Preferences > Displays.
The power light on the second monitor comes on, blinking in the following manner (if it were Morse Code): dot dash dot....(then it is dark for about four seconds before repeating the same blinking sequence). It appears to have some sort of meaning.
Any ideas? Is there a way to reset this?
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
View 24 Replies View RelatedI've had my macbook pro for 4 years now with out any problems. However, a few weeks ago my airport stopped connecting for no reason. I have tried to reconnect through the network settings but it still won't work. However, if I am in the same room as my router then the airport will connect wirelessly to the internet. But as soon as I leave the room my internet signal will go out. I know its not a problem with my router because all the other computers in my house can recieve signal anywhere in the house.
View 1 Replies View RelatedI have a 2.0Ghz Macbook (aluminum, 2gb RAM, 140gb HD). I notice there are a lot of apps that I use that are CPU-intensive that, even when it's plugged in, will only use 25% of the CPU's capacity.
When I'm not using any other program, and it's only using 25%, wouldn't that program run 4 times faster if it would just use 100%? It seems pointless to have it sit there 75% idle while I wait that much longer for a function to finish?
Is there a way to allow certain programs to use more power so they run faster?
I just got a new macbook pro unibody a few weeks ago, and when i go to shutdown the mac, my cursor is stuck for a good 20 or so seconds and then i can finally move it to shut it down. This does not seem normal to me and am wondering if this is an isolated event or it happens to others? Is there a fix for it? Such as a new driver, reinstall, etc.
View 3 Replies View RelatedSo im about 3 and 1/2 months new to my Macbook. I tried to get a .mac email address in iMail. And it just wont let me make one. I followed all the instructions and nothing happened.
View 8 Replies View RelatedIs there any workaround to make Netflix Streaming Movies work on a PowerPC G5 Tower Mac ?
It uses Sliverlight Technology from Microsoft .
Just thought I would post this article from when the Safari 4 beta came out and would not work with 1Password. I just did the same thing with the final release of Safari 4 that came out today and it worked just fine. The only thing different is you need to change the value to 5530.17 instead of 5528.16.
[URL]
Im sure 1Password will fix it in the next day or two, but for those of you who cant wait this will work.
There is something that has been bothering me something fierce since I made the switch to the Mac.
When I used Windows I could connect and disconnect USB drives whenever I wanted without fear of losing data. The way Windows works, it's designed for this so you don't have to "eject" the disk every time.
OS X however is different. I have a USB hub, which has at any given time at least 4 drives plugged into it. If I want to say, grab my laptop and head out the door, I have to wake it up, eject all the disks/media cards, and then go.
I find this to be extremely annoying, especially when I forget.
Is there a way to make OS X behave like Windows in this regard?
(I've contacted them 3 times through their Contact Us form, but never received a response; and no, it didn't end up in my Spam folder either - I checked it regularly) I decided to ask my questions here.How to make 1Pass work with Entourage? When I open the latter it will only prompt me to save the password to Mac OS Keychain, but not 1Password. I tried adding an Email Account in 1Password, but it's kind of confusing - what do I enter under "Port number" - is it Incoming port number in the first "Port number" space, and the Outcoming port number in the second "Port number" space? And what do I select under "Authentication method"?? Why are all the forms listed twice anyway?
View 8 Replies View RelatedI have purchased a new Macbook Pro and am at set up stage yet. I can't go further because the pointer is not working when I am clicking. I can't click on "Start using Mac OS X Lion." I have become so frustrated now! Please let me know if I can fix it or I have to return it to apple centre for fixing.
Info:
MacBook
Pro, Mac OS X (10.7.3), Mac OS X Lion
I can't make Photo Stream work. I try to update iPhoto --I have Lion--but it gives me a message "There is a problem with the subscription.
macappstore://itunes.apple.com failed or other messages like that if I try to update to iPhoto'11.
Info:
MacBook Pro, Mac OS X (10.6.8)
I just bought the Epson WF-2540 on the apple website but It seems it's not supported by mavericks. it's not detecting the USB cable, it's not detecting the scanner... no sign of getting driver updates also...
Is there a way to make it work or do I have to bring it back to an apple store?
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
