Just ordered a 17" MBP and am looking to use a dual monitor setup with an HPw22. I've tried to do some research on my own but am still unsure about what adapter I should go with as this is my first time attempting to run a dual monitor setup. Below are the specs of the monitor for the interfaces with a link to the entire specs.
Interfaces 1 x VGA - 15 pin HD D-Sub (HD-15) , 1 x DVI-D - 24 pin digital DVI
[URL]
I was just wondering what someone who is a bit more knowledgeable about this would recommend getting adapter wise. Can I go with either the Mini DisplayPort to VGA or Mini DisplayPort to DVI since my monitor has both? Is their an advantage to one over the other?
I connected a external monitor onto my macbook pro and I want to know how do I make that monitor my main one? like move everything (dock, folders, and bar on top) to my external monitor?
After updating to Lion, I set my macbook up with a few different desktops so I could easily swipe between them instead of searching for the windows I needed.I just set up a second monitor to my mac and noticed that anytime I swipe to a different desktop, both monitors change. Is there a way to "freeze" one while the other moves? Or better yet, can I set up my second monitor to only have one desktop while my mac still has 2 or more?
Info: MacBook, Mac OS X (10.7.4), dual monitor system
I have a new 2010 MBP and I'd like to hook up two external monitors to it, more specifically, two ASUS VW246H 24-Inch Widescreen LCD Monitors. Either via HDMI or DVI connections. I've found various usb monitor adapters, but i've read that many can't quite 'keep up' and I really can't seem to find a solid solution out there. So does anyone have a dual monitor setup they currently use, if so, what are you using to connect the mini display port to both external monitors.
I just bought the latest and greatest 15 inch Macbook Pro with Retina Display in mid-2014. Every once in awhile, my screen will go dark. When I hit the touch pad, the cursor will show up and will move, on a completely black background. At that point I panic and start depressing the touch pad, when that doesn't work, I try depressing the on/off key; which does not respond at first, but finally the screen returns to normal.? NOTE: My operating system is OSX 10.9.4.
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I purchased a MacBook a couple of days ago and it has been fine. However, today I've realised that the back of it at the bottom is getting really hot, even when the charger is not plugged in. I am not using powerful apps either.Sometimes it can almost be too hot to touch for more than a couple of seconds. This happens on any surface, whether it's on my wooden desk or not.
The back getting hot also heats up the rest of the Mac to some extent. does it need seeing to and if so will I be charged?
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
im a new switcher, just had my MBP and love mac very much i interested in mac mini, and i wonder if mac mini can use dual monitor because i only see one dvi connector in mac mini?
I am looking at my 24 inch LED and wondering how one might configure a dual monitor setup with two of these. The single cable is too short for any arrangement but CPU directly behind the monitors. Not enough length to get both to the floor under my desk or with the CPU to the side of one.
Since installing SL last Friday, every time I restart my computer, SL thinks it sees a dual monitor set up. I only have one monitor. It's really getting annoying because I lose my mouse pointer in empty space where SL thinks there is a second monitor. I'm not sure how to remedy this situation.
I would like to use the machine to do powerpoints at our church. I want to use the internal monitor and an external monitor (projector) to do the powerpoints. I want it to work like the my iBook with the screen spanning hack installed.
if not then i will probably end up using a g3 desktop instead.
Ok so if you were to play Wow on osx with dual monitor... do you play on one screen while the other screen is still under osx?? Or does the 2nd monitor become part of the game??
I know about KVM switches but i haven't found one that would share two apple cinema using 2 DVI on the KVM switch.Any site suggestions of were they might sell this switch.
I am looking to run a dual monitor setup with my mac mini. Can someone point me in the right direction on what is needed (if anything). Both monitors are brand new, but neither have hdmi.
My MBP was updated from 10.5.2 to 10.5.4 (combined update) this morning and, after the installation finished, it rebooted into a blue screen. I restarted it several times and always went into blue screen.
Now, the interesting part is that this is not the "blue screen after install" problem others are experiencing. If I disconnect the external monitor during restart and wait for OS X to start everything works fine. After OS X starts properly I can even reconnect the external monitor and it works fine. In fact I am writing this post from my MBP using the external monitor right now.
Since some document on the Apple Support website was suggesting to remove the file ApplicationEnhancer.bundle in System/Library/SystemConfiguration when experiencing blue screens after the install of 10.5.4, I did look in that folder for that file but it's not there...
I'm working with a Mac Pro (2x3 GHz Dual-Core Intel Xeon, 4 GB RAM) and a dual 23" monitor setup. Quite recently the second monitor stopped responding, after disconnecting everything, moving, and reconnecting. (Everything was boxed lovingly in its original packaging and moved by gentle movers.)
It isn't the monitors � both work fine in the first monitor port. The computer recognizes there is a second monitor attached, allowing me to access Arrangement options under System Preferences > Displays.
The power light on the second monitor comes on, blinking in the following manner (if it were Morse Code): dot dash dot....(then it is dark for about four seconds before repeating the same blinking sequence). It appears to have some sort of meaning.
By using boot camp, I finally managed to install XP on my Macbook Pro. I can extend the monitor but the problem is that the extended monitor is in Black&WHite and totally jagged/off centered. I tested the adater and the cable with other machine and they work fine, so definitely issue is not the cable and the adapter. I really need to use Dual monitor for some software that I use on XP, so this is really really important to me.... My MacbookPro is 2.16ghz with 2GB of RAM, and the video card is ATI Radeon X1600. Maybe I need to install different driver for the card? If anyone has done the same please please let me know exactly how you did it
Did anyone tested this Kensington Dual Monitor Adapter on iMac. I currently have one monitor connected to my iMac and I wouls love to add another one I am just not sure if this is going to work.
I have a client with a fairly basic Mac Pro setup. He has the standard ATI 2600 graphics card connected to two 26 inch Samsung LCDs. The main monitor is ok, but the secondary monitor has about one inch of the far right side that does not work. The desktop area itself is squished in, and not chopped off. So far we have replaced the monitor with another, he has about a dozen at his disposal, we have replaced the VGA cable, and we have switched ports on the video card and re arranged the screen locations in system preferences. No matter what configuration we use, the screen on the right has it's image squished and makes many things look distorted.
Just curious if anyone else has had this issue, and what they've done to resolve it. We've contacted Apple care and they originally blamed the monitor, which is why we replaced the screen completely. At some point in the next couple weeks we may have a chance to bring the system to the Apple store, but then we'd need two monitors to demonstrate the problem.
I'm running Mac OS 10.5.6. When I plug in the external monitor to my MacBook Pro, I setup Firefox and Entourage on my notebook monitor and Photoshop on the external. I also move the Apple menu bar to the external (since PS is my main app I like having the menu bar close by). Photoshop doesn't present a problem because I'm able to switch the layout for different workspaces (laptop alone or laptop and external), but I find that Firefox and Entourage don't remember their positions.
For example, my current setup is dual monitors as mentioned above. When I get home and power up the notebook, I'll launch all the same apps. Firefox is just barely within view hanging off the left side of the screen so I'll grab the window and drag it over so I can access the green button (not sure what this is called). Entourage displays just fine. When I get back to work the next day and plug in the external, Firefox displays on the external with the window sized to fit the notebook monitor) and I'll just drag it over. Entourage loads into the external as maximized and I'll drag it over and click the green button.
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
I know this is a pretty elementary question, but this is my first time using a dual monitor setup. What I would like to do is be able to browse on one monitor while watching video files full screen on another monitor. Is this possible? If so what do I need to do to make it so the smaller monitor doesn't go black once I enter full screen on the larger monitor?
