I am looking to run a dual monitor setup with my mac mini. Can someone point me in the right direction on what is needed (if anything). Both monitors are brand new, but neither have hdmi.
View 9 RepliesI am looking at my 24 inch LED and wondering how one might configure a dual monitor setup with two of these. The single cable is too short for any arrangement but CPU directly behind the monitors. Not enough length to get both to the floor under my desk or with the CPU to the side of one.
View 19 Replies View RelatedI would like to use the machine to do powerpoints at our church. I want to use the internal monitor and an external monitor (projector) to do the powerpoints. I want it to work like the my iBook with the screen spanning hack installed.
if not then i will probably end up using a g3 desktop instead.
Just ordered a 17" MBP and am looking to use a dual monitor setup with an HPw22. I've tried to do some research on my own but am still unsure about what adapter I should go with as this is my first time attempting to run a dual monitor setup. Below are the specs of the monitor for the interfaces with a link to the entire specs.
Interfaces 1 x VGA - 15 pin HD D-Sub (HD-15) , 1 x DVI-D - 24 pin digital DVI
[URL]
I was just wondering what someone who is a bit more knowledgeable about this would recommend getting adapter wise. Can I go with either the Mini DisplayPort to VGA or Mini DisplayPort to DVI since my monitor has both? Is their an advantage to one over the other?
I was wondering if anyone knows of any way to run a dual screen setup on an old style mac mini (the one with only 1 DVI output)?
View 4 Replies View RelatedJust about to purchase the new mini and I need to buy the adapter to use dual monitors. Is it the Apple Mini-DVI to DVI Adapter that I need to buy? I'm connecting my Samsung 24" which is dvi.
Just wanted to double check before I purchased it.
im a new switcher, just had my MBP and love mac very much i interested in mac mini, and i wonder if mac mini can use dual monitor because i only see one dvi connector in mac mini?
View 7 Replies View RelatedI have bought a mac mini lion server today. I do not have desktops in home, so no monitors.
How can I setup/login into it? I tried Server Admin Tools, but I do not have root password (tried blank and serial number).
Info:
Mac mini, Mac OS X (10.7.4), Lion Server
i have 2 LCD's hooked to the new Mini as such:
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
I have an Early 2009 Mac Mini with Mini DVI and Mini DisplayPort. And I have two 1080p HDTVs. The Mac Mini is capable of dual display, and I've gotten it to work before, so the issue is not the TV or Mac. And I have tried both Mirroring and No Mirroring.
I got a Mini DisplayPort to HDMI Adapter (#5311) and a Mini-DVI to HDMI Adapter (#4852) both from MonoPrice. And for some reason I can't get the Mac Mini to dual display, it's only one or the other.
Before I had a Mini Displayport Male and USB Male AUDIO to HDMI Female Converting Adapter (#5969) and I got video on both HDTVs, but not audio at the same time b/c one was USB and one was TOSLINK.
I'm not sure why I can't get video on both monitors. Any help?
how to setup dual monitors. I have a 2009 Mac Pro with a ATI Radeon HD 4870. I dont see the options in the Display settings. Also I I get nothing on the second monitor?
Info:
Mac Pro, Mac OS X (10.7.3)
I�m looking to setup another monitor for my 07-08 iMac, I have tried searching and googling for an answer but don�t seem to have had much luck, so I have got a few questions.
1. Is my iMac even able to support dual monitors?
2. If so how would I go about this?
3. Will just any monitor work or has to be a certain type?
How do i setup duel monitors with FCE so i can see the video in full screen on the second monitor.
View 3 Replies View RelatedSetting up a dualboot with Windows 7 Shine V2 and Lion...
Info:
iPhone 3G, Mac OS X (10.7.3), DualBoot
I have been running my macbook pro open, with a single monitor running beside it. I have come to the conclusion that I would benefit from two large monitors while working at home.
I know I need to buy the dualhead2go DP edition, but what Im not sure about is the cables I need to hook up to my monitors. I haven't yet decided what two monitors I am going to hook up to it, although they will be exactly the same and have HDMI connections.
What I am planning on doing is Getting the Dual Head 2 go, along with 2 DisplayPort to HDMI converters, and 2 HDMI cables, Correct me if Im wrong, but this should work?
Also, If anyone is currently using a dual head to go, how is the performance? I wont be doing any gaming, so that is not an issue, but for day to day tasks I assume everything will run fine? Im running the 330 in my 15' MBP.
Since I'm experiencing some issues with my current setup (4870+GT120) I'd like to hear if the new cards work on 10.6.5 with at least two displays connected to it, and one of them in portrait mode. Ideally someone with three screens connected to a single card and two of them in portrait (on the DP outputs).
View 2 Replies View RelatedI need a bit of insight as to how to maximize the performance (and if there is any) with dual display setups on both my MP1,1 and 5,1.
First off, MP 5,1. Currently I'm running a 30" ACD off a DVI and 23" of a MDP to DVI on a 5870. The 30" is my main work display - the 23" is pretty much running trivial things, like browsers, finder, iTunes, etc. Since VRAM is being split between the two displays, would I benefit from installing a second video card to just run the 23" monitor and dedicate the 5870 to just run the 30" ACD? If yes, what should I use? I have an old 7300, but If there's anything better out there that's non cable powered, I'll get it. Also, there are times (rarely) when I need to run Windows 7-64bit to do some 3d CAD work - would having video cards from different vendors (hence different drivers) cause W7 to go nuts (conflicts, etc)? I can live with just the 30" on W7. I want to get get the most out of 5870 and 30" ACD while not running into conflicts under OS X by introducing another video card.
Second, MP 1,1.
It's windows 7 64-bit machine only. I have OS X installed, but since I use it for work I never boot into it. It's running a 27" display (1920x1200) on DVI and 23" (1680X1050) on MDP to DVI adapter. Again, the bigger display is my work area, and the smaller one runs browsers, outlook, etc. I do 3d CAD work, so more VRAM I dedicate to my main display, better it is. So back to my original question...what are my options? I do have that 7300 hanging around, but, again, I'm not so thrilled on mixing video card vendors and drivers. Should I just get some sort of low grade Windows based ATI Radeon card (don't care much of OS X on that machine).
I've got a friend that was using her Mac SE original from 1990 or so up until year 2004, at which time I insisted she get hooked up on an iMac g3 333mhz -- and I tried to get her an Apple Tech out to NC where she is to put a new hd in that old machine and some memory.
Well she's been running 9.2.2 and now it's time to go to Panther on an iBook 500mhz that I've upgraded with new hd and memory etc.
But I don't have the original set up guide. Yes, I downloaded a "users manual" off Apple but I need the basic booklet that came with the original machine -- or a download of it.
Anyone got one? Also anyone got a good Panther tutorial for someone who barely knows how to use OS9?
I have a new 2010 MBP and I'd like to hook up two external monitors to it, more specifically, two ASUS VW246H 24-Inch Widescreen LCD Monitors. Either via HDMI or DVI connections. I've found various usb monitor adapters, but i've read that many can't quite 'keep up' and I really can't seem to find a solid solution out there.
So does anyone have a dual monitor setup they currently use, if so, what are you using to connect the mini display port to both external monitors.
I have a fresh install of Windows XP, service pack 2 on a boot camp partition on my macbook (13" first gen aluminum case) and a Apple LED Cinema Display attached to the mini display port.
I can't seem to make the Cinema Display the primary display (the "Use this device as the primary monitor" checkbox is always greyed out in the Display Property Settings tab). I also can't shut the macbook lid and continue to use it closed (with kb, mouse and monitor attached) like I would when booting OSX.
Is there some other way to make the Cinema Display the primary monitor, so I can leave the macbook closed when booting into Windows?
Is there any way to hook up two monitors to a mini?
View 4 Replies View RelatedSince installing SL last Friday, every time I restart my computer, SL thinks it sees a dual monitor set up. I only have one monitor. It's really getting annoying because I lose my mouse pointer in empty space where SL thinks there is a second monitor. I'm not sure how to remedy this situation.
View 1 Replies View RelatedI am looking for a good software to monitor each core in a 8 core setup. I have heard of iStat doing this but I was wondering if anyone recommends anything that they found to work quite well.
View 5 Replies View Relatedi would like to know is it possible to have my MBP lid closed and use two additional monitors as my main?
will there be any heat issue on the MBP ( keep in mind i will be using it for many hours design/code )
Ok so if you were to play Wow on osx with dual monitor... do you play on one screen while the other screen is still under osx?? Or does the 2nd monitor become part of the game??
View 3 Replies View RelatedI know about KVM switches but i haven't found one that would share two apple cinema using 2 DVI on the KVM switch.Any site suggestions of were they might sell this switch.
The old Mini worked fine with my Westinghouse 24" LCD monitor (HDMI input -connected to Mini via DVI->HDMI cable).The new Mini Server 2010 has HDMI out, so I used a straight-through HDMI cable. The display looks terrible! All of the fonts appear to have a 'shadow' next to them - almost like an old analog VGA with 'interference'.Thinking it could be the cable, I went back to my old Mini's DVI->HDMI cable (and used the new Mini's HDMI->DVI adapter to connect to it). Same results.The Westinghouse monitor's native resolution is 1920x1200. The Mac says that it's configured for 1920x1200.
View 14 Replies View Relatedhere is what I have:Quad-Display Monitors (all working from PC, 2 VGA and 2 DVI)
PC Windows Vista Desktop
1 Keyboard
1 Mouse
and a Macbook Laptop.
I do software development (for PC AND MAC) and need the ability to switch between the PC / MACBOOK on my Quad-Display monitors and use the same keyboard and mouse.Please let me know what I need, I assume some kind of switch but in hours of searching google was not able to find anything to handle this. Also what keyboard would i need to handle MAC and PC functions (prefer wireless)
My MBP was updated from 10.5.2 to 10.5.4 (combined update) this morning and, after the installation finished, it rebooted into a blue screen. I restarted it several times and always went into blue screen.
Now, the interesting part is that this is not the "blue screen after install" problem others are experiencing. If I disconnect the external monitor during restart and wait for OS X to start everything works fine. After OS X starts properly I can even reconnect the external monitor and it works fine. In fact I am writing this post from my MBP using the external monitor right now.
Since some document on the Apple Support website was suggesting to remove the file ApplicationEnhancer.bundle in System/Library/SystemConfiguration when experiencing blue screens after the install of 10.5.4, I did look in that folder for that file but it's not there...
I have a dual monitor setup and just wondering how to get my secondary monitor to play gta iv and games in general from the get-go.
View 3 Replies View Related