Since installing SL last Friday, every time I restart my computer, SL thinks it sees a dual monitor set up. I only have one monitor. It's really getting annoying because I lose my mouse pointer in empty space where SL thinks there is a second monitor. I'm not sure how to remedy this situation.
View 1 Repliesim a new switcher, just had my MBP and love mac very much i interested in mac mini, and i wonder if mac mini can use dual monitor because i only see one dvi connector in mac mini?
View 7 Replies View RelatedI am looking at my 24 inch LED and wondering how one might configure a dual monitor setup with two of these. The single cable is too short for any arrangement but CPU directly behind the monitors. Not enough length to get both to the floor under my desk or with the CPU to the side of one.
View 19 Replies View RelatedI'm trying to install this hard drive in my Powermac. Here's the drive I'm considering installing:
[URL]
Will it work with my "Ultra ATA" Interface or will I have to buy a SATA card?
i would like to know is it possible to have my MBP lid closed and use two additional monitors as my main?
will there be any heat issue on the MBP ( keep in mind i will be using it for many hours design/code )
I would like to use the machine to do powerpoints at our church. I want to use the internal monitor and an external monitor (projector) to do the powerpoints. I want it to work like the my iBook with the screen spanning hack installed.
if not then i will probably end up using a g3 desktop instead.
Ok so if you were to play Wow on osx with dual monitor... do you play on one screen while the other screen is still under osx?? Or does the 2nd monitor become part of the game??
View 3 Replies View RelatedI know about KVM switches but i haven't found one that would share two apple cinema using 2 DVI on the KVM switch.Any site suggestions of were they might sell this switch.
I am looking to run a dual monitor setup with my mac mini. Can someone point me in the right direction on what is needed (if anything). Both monitors are brand new, but neither have hdmi.
View 9 Replies View RelatedMy MBP was updated from 10.5.2 to 10.5.4 (combined update) this morning and, after the installation finished, it rebooted into a blue screen. I restarted it several times and always went into blue screen.
Now, the interesting part is that this is not the "blue screen after install" problem others are experiencing. If I disconnect the external monitor during restart and wait for OS X to start everything works fine. After OS X starts properly I can even reconnect the external monitor and it works fine. In fact I am writing this post from my MBP using the external monitor right now.
Since some document on the Apple Support website was suggesting to remove the file ApplicationEnhancer.bundle in System/Library/SystemConfiguration when experiencing blue screens after the install of 10.5.4, I did look in that folder for that file but it's not there...
I have a dual monitor setup and just wondering how to get my secondary monitor to play gta iv and games in general from the get-go.
View 3 Replies View RelatedI have a 2008 iMac with intel processors and a Macbook Air for when I travel.
I want to set the Macbook Air up as a second monitor while I am at home using my iMac. How do I do this?
Just ordered a 17" MBP and am looking to use a dual monitor setup with an HPw22. I've tried to do some research on my own but am still unsure about what adapter I should go with as this is my first time attempting to run a dual monitor setup. Below are the specs of the monitor for the interfaces with a link to the entire specs.
Interfaces 1 x VGA - 15 pin HD D-Sub (HD-15) , 1 x DVI-D - 24 pin digital DVI
[URL]
I was just wondering what someone who is a bit more knowledgeable about this would recommend getting adapter wise. Can I go with either the Mini DisplayPort to VGA or Mini DisplayPort to DVI since my monitor has both? Is their an advantage to one over the other?
I'm working with a Mac Pro (2x3 GHz Dual-Core Intel Xeon, 4 GB RAM) and a dual 23" monitor setup. Quite recently the second monitor stopped responding, after disconnecting everything, moving, and reconnecting. (Everything was boxed lovingly in its original packaging and moved by gentle movers.)
It isn't the monitors � both work fine in the first monitor port. The computer recognizes there is a second monitor attached, allowing me to access Arrangement options under System Preferences > Displays.
The power light on the second monitor comes on, blinking in the following manner (if it were Morse Code): dot dash dot....(then it is dark for about four seconds before repeating the same blinking sequence). It appears to have some sort of meaning.
Any ideas? Is there a way to reset this?
I've got a brand new macbook pro 13inch and recently purchased two of the mini display port adapters to dvi.
Figured I would setup both my external monitors 1920x1080 and have 2 + 1 monitors for working.
Only once was I able to plug both of the monitors in and have them work. Every other time (100s) the laptop crashes.
I'm able to run one external monitor at a time, but not both.
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Mavericks (10.9.4)
I've bought my 13" MBP (love it) but need to dual boot to run some programs, so I bought the Windows 7 Prof 64bit Upgrade. Now... because it's the upgrade version do I need to have a previous version of a Windows OS installed before I can upgrade or can I install straight away? Another question, at some point I'm tempted to upgrade to the 500gb Momentus XT. Will my Windows 7 disk be okay for multiple installs?
View 11 Replies View RelatedBy using boot camp, I finally managed to install XP on my Macbook Pro. I can extend the monitor but the problem is that the extended monitor is in Black&WHite and totally jagged/off centered. I tested the adater and the cable with other machine and they work fine, so definitely issue is not the cable and the adapter. I really need to use Dual monitor for some software that I use on XP, so this is really really important to me.... My MacbookPro is 2.16ghz with 2GB of RAM, and the video card is ATI Radeon X1600. Maybe I need to install different driver for the card? If anyone has done the same please please let me know exactly how you did it
View 18 Replies View RelatedDid anyone tested this Kensington Dual Monitor Adapter on iMac. I currently have one monitor connected to my iMac and I wouls love to add another one I am just not sure if this is going to work.
View 3 Replies View Relatedcan enyone tell me if you can have one space on one monitor and one on an other monitor?
View 8 Replies View RelatedI have a client with a fairly basic Mac Pro setup. He has the standard ATI 2600 graphics card connected to two 26 inch Samsung LCDs. The main monitor is ok, but the secondary monitor has about one inch of the far right side that does not work. The desktop area itself is squished in, and not chopped off. So far we have replaced the monitor with another, he has about a dozen at his disposal, we have replaced the VGA cable, and we have switched ports on the video card and re arranged the screen locations in system preferences. No matter what configuration we use, the screen on the right has it's image squished and makes many things look distorted.
Just curious if anyone else has had this issue, and what they've done to resolve it. We've contacted Apple care and they originally blamed the monitor, which is why we replaced the screen completely. At some point in the next couple weeks we may have a chance to bring the system to the Apple store, but then we'd need two monitors to demonstrate the problem.
I'm running Mac OS 10.5.6. When I plug in the external monitor to my MacBook Pro, I setup Firefox and Entourage on my notebook monitor and Photoshop on the external. I also move the Apple menu bar to the external (since PS is my main app I like having the menu bar close by). Photoshop doesn't present a problem because I'm able to switch the layout for different workspaces (laptop alone or laptop and external), but I find that Firefox and Entourage don't remember their positions.
For example, my current setup is dual monitors as mentioned above. When I get home and power up the notebook, I'll launch all the same apps. Firefox is just barely within view hanging off the left side of the screen so I'll grab the window and drag it over so I can access the green button (not sure what this is called). Entourage displays just fine. When I get back to work the next day and plug in the external, Firefox displays on the external with the window sized to fit the notebook monitor) and I'll just drag it over. Entourage loads into the external as maximized and I'll drag it over and click the green button.
i have 2 LCD's hooked to the new Mini as such:
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
I know this is a pretty elementary question, but this is my first time using a dual monitor setup. What I would like to do is be able to browse on one monitor while watching video files full screen on another monitor. Is this possible? If so what do I need to do to make it so the smaller monitor doesn't go black once I enter full screen on the larger monitor?
View 8 Replies View RelatedSo My name is Lindsey and I have been an avid apple supporter. However in the last two weeks I've come extremely close to selling everything apple I own and going back to windows. I purchased a refurbished Intel Imac through the apple store about 4 months ago. Awesome computer, everything worked great. Well I recently decided to add an additional monitor so of course I started browsing the forums and did my due diligence. I read that there were some compatibility issues with some of the older imacs and the apple 24 in led display so naturally I called my nearest apple store to find out if I could use this display.
The sales associate listened as I explained that I had a 2008 intel Imac and assured my the display would work without an adapter. Of course you guys know this is totally wrong but I was unaware of this fact at the time. SO I drove a 6 hour round trip to Dallas and paid 970 in cash for my new monitory. Get it home and realize that something is obv wrong. I call the store back and the clerk tells me I need an adapter that can be bought at Best Buy. I drive 45 min to best buy. They are sold out. Next day I drive an hour and a half to the next closest Best Buy. They dont have it either..............................
I connected a external monitor onto my macbook pro and I want to know how do I make that monitor my main one? like move everything (dock, folders, and bar on top) to my external monitor?
View 3 Replies View RelatedAfter updating to Lion, I set my macbook up with a few different desktops so I could easily swipe between them instead of searching for the windows I needed.I just set up a second monitor to my mac and noticed that anytime I swipe to a different desktop, both monitors change. Is there a way to "freeze" one while the other moves? Or better yet, can I set up my second monitor to only have one desktop while my mac still has 2 or more?
Info:
MacBook, Mac OS X (10.7.4), dual monitor system
I had the brilliant idea of trying a clean install of OS X on my circa 2002 iBook. I had Tiger on there, but the iBook was quite sluggish and I was getting frustrated with the performance of the iBook on the only thing that I wanted it to use it for: the internet. So I thought that if I wiped the hard drive and installed OS X again, I could benefit from erasing an accumulation of junk on the iBook. (One thing to note is that the hard drive is actually from a clamshell iBook. The hard drive stopped working a few years ago, and I spent a weekend replacing the drive)
The combo drive has long since stopped working on the iBook, so I hooked up the iBook to my MacBook via firewire and erased the hard drive. But like an idiot I installed 10.5 instead of 10.4 and now the iBook only returns the folder with the question mark. I have not had any luck (either before the ill advised OS X install or before) with doing a remote install. I have the original disks that came with the iBook (10.1), but when I try to install them using the MacBook's drive it just tells me that I can't install it on my MacBook, which is not what I want to do.
I have a new 2010 MBP and I'd like to hook up two external monitors to it, more specifically, two ASUS VW246H 24-Inch Widescreen LCD Monitors. Either via HDMI or DVI connections. I've found various usb monitor adapters, but i've read that many can't quite 'keep up' and I really can't seem to find a solid solution out there.
So does anyone have a dual monitor setup they currently use, if so, what are you using to connect the mini display port to both external monitors.
Firstly sorry if this has been answered before
I have a 2 x 2.8 Mac Pro and want to have dual monitors for Photoshop and Dreamweaver development
The monitors I have are 2408WFP Dell displays
The MP has a ATi HD 2600XT fitted
What is the best solution for dual monitor support.
ATI 4870 or ATi X1900 or GTX285?
Does the ATI 4870 support 2 DVI monitors with adaptors?
Can I use the 4870 with the 2600??
I recently purchased a miniDVI to VGA adaptor, and set up a dual monitor (37") to my iMac (24"). The problem is, the new monitor is only displaying at 1440 x 900.. i'd like it to be able to show 1920x1080; the actual resolution of the monitor. Any way of doing this? (the maximum resolution in the display preferences is 1440 x 900)
